高温超导磁通跳跃过程中的磁致伸缩效应

文中基于超导磁通动力学理论,考虑电磁力与热激活对磁通运动的影响,基本模型包括由等效电阻率随超导体温度和磁场变化的磁通扩散方程,以及比热随超导体温度变化的热传导方程组成.在此基础上,用数值方法求解了这组非线性磁热耦合方程,主要研究了有磁通跳跃状发生状态时环境温度和外磁场速度对于高温超导磁致伸缩的影响.结果表明:磁通进入超...     

Neutron depolarisation imaging: Stress measurements by magnetostriction effects in Ni foils

In this article we present first proof-of-principle neutron depolarization imaging measurements on Ni foils under mechanical stress. The magnetostrictive effect in Ni leads to a reorientation of the magnetic domains in the material depending on the applied force. This in turn leads to a change of the depolarization a neutron beam suffers from transmission of the sample. We propose to use this method as a new technique for the spatially resolved measurement of mechanical stress.     

Field and temperature induced colossal strain in Gd5(SixGe1−x)4

Gd₅(Si_xGe_1−x)₄, known for its giant magnetocaloric effect, also exhibits a colossal strain of the order of 10,000 ppm for a single crystal near its coupled first-order magnetic-structural phase transition, which occurs near room temperature for the compositions 0.41≤x≤0.575. Such colossal strain can be utilised for both magnetic sensor and actuator applications. In this study, various measurements have been carried out on strain as a function of magnetic field strength and as a function of temperature on single crystal Gd₅Si₂Ge₂ (x=0.5), and polycrystalline Gd₅Si_1.95Ge_2.05 (x=0.487) and Gd₅Si_2.09Ge_1.91 (x=0.52). Additionally a giant magnetostriction/thermally induced strain of the order of 1800 ppm in polycrystalline Gd₅Si_2.09Ge_1.91 was observed at its first order phase transition on varying temperature using a Peltier cell without the use of bulky equipment such as cryostat or superconducting magnet.     

Microstructure-property relationship in magnetoelectric bulk composites

We present systematic studies that comprise phase connectivity and dielectric, multiferroic (MF) and magnetoelectric (ME) properties of (x) Ni_0.8Co_0.2Fe₂O₄+(1−x) Pb(Mg_1/3Nb_2/3)_0.67Ti_0.33O₃ [where x=0.15, 0.30 and 0.45] ME composites prepared by conventional solid-state reaction method. Scanning electron microscopic images of the composites predict different types of connectivity schemes viz 3-0, 3-1 and 3-3. The phase transition temperature of PMN-PT is independent of Ni_0.8Co_0.2Fe₂O₄ content. Room temperature P-E and M-H loops indicate the simultaneous existence of ferroelectric/magnetic ordering. In order to study the possibility of monitoring electrical ordering by means of a magnetic field, ME measurements were carried out. The composition-dependent phase connectivity was well co-related to formation of percolation path and inturn magnetoelectric output.     

Magnetic properties of Terfenol-D film on a compliant substrate

Substrate thickness effects on the magnetization and magnetostriction of Terfenol-D films was studied by using a nonlinear constitutive model combined with the Timosheko elastic theory. Results show that characteristics of Terfenol-D films on compliant substrates are different from those of their bulk counterpart. Tunable properties can be obtained by adjusting the film/substrate thickness ratio.     

The use of stress for the control of magnetic anisotropy in amorphous FeSiBC thin films: a magneto-optic study

Magnetostrictive FeSiBC amorphous thin films based on the METGLAS^® 2605SC composition have been produced by RF magnetron sputtering. The magnetic properties were investigated using the magneto-optical Kerr effect, with both point hysteresis measurements and domain imaging. Significant in-plane anisotropy is observed in the as-grown samples, which was attributed to the residual field from the magnetron sputter source. The effects of various treatments on the samples were investigated, including the use of forming fields, stress, and thermal processing. The deliberate introduction of stress into these materials is found to allow excellent control of both the direction and magnitude of magnetic anisotropy, and can also be used as a novel method for the absolute measurement of magnetostriction. The treatments are evaluated for their potential to control anisotropy in magnetostrictive device applications.     

Magnetoelastic fracture of soft ferromagnetic materials

Effects of magnetic field on fracture toughness of soft ferromagnetic materials were studied using experimental techniques and theoretical models. The manganese–zinc ferrite with a single-edge-notch-beam (SENB) were chosen to be the specimen and the Vickers’ indentation specimen subjected to a magnetic field were chosen to be the specimens. Results indicate that there is no significant variations of the measured fracture toughness of the manganese–zinc ferrite ceramic in the presence of the magnetic field. The theoretical model involves an anti-plane shear crack with finite length in an infinite magnetostrictive body where an in-plane magnetic field prevails at infinity. Magnetoelasticity is used. The crack-tip elastic field is different from that of the classical mode III fracture problem. Furthermore, the magnetoelastic fracture of the soft ferromagnetic material was studied by solving the stress field for a soft ferromagnetic plane with a center-through elliptical crack. The stress field at the tip of a slender elliptical crack is obtained for which only external magnetic field normal to the major axis of the ellipse is applied at infinity. The results indicate that the near field stresses are governed by the magnetostriction and permeability of the soft ferromagnetic material. The induction magnetostrictive modulus is a key parameter for finding whether magnetostriction or magnetic-force-induced deformation is dominant near the front an elliptically-shaped crack. The influence of the magnetic field on the apparent toughness of a soft ferromagnetic material with a crack-like flaw can be regarded approximately in two ways: one possesses a large induction magnetostrictive modulus and the other has a small modulus. Finally, a small-scale magnetic-yielding model was developed on the basis of linear magnetization to interpret the experimental results related to the fracture of the manganese–zinc ferrite ceramics under magnetic field. Studied also is the fracture test of the soft ferromagnetic steel with compact tension specimens published in the existing literature.     

Effect of heat treatment on the magnetic and magnetoelastic properties of cobalt ferrite

The influence of different heat treatments on the magnetic and magnetoelastic properties of highly magnetostrictive CoFe₂O₄ has been investigated. The first order cubic anisotropy coefficient, coercive field, magnetostriction and high strain sensitivity were observed to decrease as the heat treatment temperature increased. The saturation magnetization of the samples on the other hand increased with increase in heat treatment temperature. These changes were not accompanied by any observable changes in crystal structure or composition and are indicative of migration of Co²⁺ from the octahedral sites (B-sites) to the tetrahedral sites (A-sites) and Fe³⁺ from the A-sites to the B-sites of the spinel structure. Different distributions of the cations at the two distinct lattice sites can strongly affect the magnetic and magnetoelastic properties of these materials.     

High magnetostriction at low fields of (Tb1−xDyx)0.2Pr0.8(Fe0.4Co0.6)1.88C0.05 intermetallic compounds

The structure and magnetostriction of the (Tb_1−xDy_x)_0.2Pr_0.8(Fe_0.4Co_0.6)_1.88C_0.05 intermetallic compounds (0≤x≤1) were studied by X-ray diffraction and magnetic measurements. The formation of an approximate single Laves phase with a MgCu2-type cubic structure was observed in this series of compounds. It was found that the Curie temperature and the saturation magnetization of the compounds would decrease with increase in the Dy content up to x=1. The magnetostriction λ_a (λ_a=λ_‖-λ_⊥) gently rises when x≤0.6, and follows with a precipitous fall when x exceeds 0.6, with the highest value of λ_a being reached in the compounds with x=0.6. The magnetostriction of all the samples was observed to approach their own saturation in the magnetic fields higher than 4 kOe. This indicates that the addition of a small amount of Dy could effectively improve the low-field magnetostriction of the Tb_0.2Pr_0.8(Fe_0.4Co_0.6)_1.88C_0.05 compounds, which could become a kind of promising magnetostrictive material.