High temperature annealing effect on structural and magnetic properties of Ti/Ni multilayers

High temperature annealing effect on structural and magnetic properties of Ti/Ni multilayer (ML) up to 600 °C have been studied and reported in this paper. Ti/Ni multilayer samples having constant layer thicknesses of 50 Å each are deposited on float glass and Si(1 1 1) substrates using electron-beam evaporation technique under ultra-high vacuum (UHV) conditions at room temperatures. The micro-structural parameters and their evolution with temperature for as-deposited as well as annealed multilayer samples up to 600 °C in a step of 100 °C for 1 h are determined by using X-ray diffraction (XRD) and grazing incidence X-ray reflectivity techniques. The X-ray diffraction pattern recorded at 300 °C annealed multilayer sample shows interesting structural transformation (from crystalline to amorphous) because of the solid-state reaction (SSR) and subsequent re-crystallization at higher temperatures of annealing, particularly at ≥400 °C due to the formation of TiNi₃ and Ti₂Ni alloy phases. Sample quality and surface morphology are examined by using atomic force microscopy (AFM) technique for both as-deposited as well as annealed multilayer samples. In addition to this, a temperature dependent dc resistivity measurement is also used to study the structural transformation and subsequent alloy phase formation due to annealing treatment. The corresponding magnetization behavior of multilayer samples after each stage of annealing has been investigated by using Magneto-Optical Kerr Effect (MOKE) technique and results are interpreted in terms of observed micro-structural changes.     

Influence of Cd and Cr substitutions on the magnetization and permeability of magnesium ferrites

Magnetization and permeability of polycrystalline ferrites with general formula Cd_xMg_1−xFe_2−yCr_yO₄ (x=0, 0.2, 0.4, 0.6, 0.8, 1.0; y=0, 0.05 and 0.10) were studied. Study of saturation magnetization reveals that the Neel's two-sublattice model exists upto x=0.4, for y=0, 0.05 and 0.1 and a three-sublattice model (YK-model) is predominant for x>0.4 and y=0, 0.05 and 0.10. The saturation magnetization and magnetic moment were found to decrease with the increase in Cr³⁺ contents, which is attributed to the dilution of B–B site interaction. Variation of initial permeability with temperature revealed the long-range ferromagnetic ordering in the compounds with x=0.4. The sample with x?0.4 and y=0, 0.05 and 0.10 showed peaking behavior near Curie temperature, which is attributed to the decrease of anisotropy constant K₁ to zero. Low-frequency dispersion of initial permeability suggests domain wall displacement. Addition of Cd²⁺ resulted in a sharp decrease in Curie temperature. With the addition of Cr³⁺, initial permeability was found to decrease.     

Magnetic configurations of hybrid ferromagnetic dot–superconductor systems

In-plane single domain and vortex magnetization configurations of the magnetic dot in the hybrid superconductor–ferromagnet system are considered. Single domain configuration energy shift due to the presence of superconductor is calculated. The change of the phase curve of the ferromagnetic dot magnetization due to the repulsion of the magnetic field by the superconductor is obtained. Up to the two-fold decrease of the ferromagnetic dot critical radius due to the presence of the superconductor is predicted.     

磁化作用对汽油动态挥发性影响的研究

用热重（TG）分析和自行设计的原位动态挥发实验，研究了在不同条件下汽油的挥发性，结果表明，磁化空气或磁化汽油都可提高汽油的挥发性，而汽油和空气共同磁化，可更大幅度地提高汽油的挥发性。     

Influence of aspect ratio and anisotropy distribution in ordered CoNi nanowire arrays

The size effects on magnetic properties of nanowires arrays were studied varying the nanowires diameter and maintaining the same periodicity among them, for two different nominal compositions of Co and Ni in the alloy form. The competition among magnetocrystalline and shape anisotropies changes drastically from smallest to biggest diameters altering the easy axis direction. In the case of 75% of Co in alloy, experimental values of the effective anisotropy constant (K_eff) vary from positive to negative depending on the diameter, which means a reversal of the easy axis direction. For 50% of Co the shape anisotropy dominates over the magnetocrystalline for all studied diameters.     

Structural,dielectric and magnetic properties of cobalt based spinel ferrites

CoYb_xFe_2-xO₄ (x = 0.00, 0.025, 0.05, 0.075, 0.10) spinel ferrites were synthesized by co-precipitation technique. Structural, dielectric and magnetic properties were measured. X-ray diffraction analysis showed that all the prepared spinel ferrites possessed cubic spinel structure. Dielectric constant, AC conductivity and dielectric loss decreased with the addition of rare earth ions. The impedance analysis explained the role of grains and grain boundaries with in prepared samples. Cole-Cole plots helped to measure the values of grains and grain boundary's resistance. The magnetic properties proved the soft nature of these ferrites. Saturation magnetization and remanence decreased while coercivity was enhanced with the addition of ytterbium concentration. All these parameters suggested that these prepared samples might be suitable for high frequency applications.     

Microstructure and Magnetic Properties of Carbon‐Coated Nanoparticles

Abstract

In the present work, microstructure and superparamagnetic properties of two types of carbon‐coated magnetic Ni and Fe nanoparticles [Ni(C) and Fe(C)] are reviewed. High‐resolution transmission electron microscopy (HRTEM), electron diffraction (SAED), and x‐ray diffraction (XRD) analyses have been used to reveal the distinct structural morphologies of Ni and Fe nanoparticles. Moreover, novel carbon‐coated Ni nanoparticle assemblies offer us great opportunities for studying the mechanism of superparamagnetism in particle assemblies. Magnetization measurements [M(T) and M(H) curves] for assemblies of Ni nanoparticles indicate that modified superparamagnetic properties at T > T _B, have been found in the assemblies of Ni(C) particles. The blocking temperature, T _B, is determined to be near 115K under a certain applied field. Above T _B, the magnetization M(H, T) can be described by the classical Langevin function L using the relation, M/M _s (T = 0) = coth (μH/kT) ? kT/μH. It is suggested that these assemblies of carbon‐coated Ni nanoparticles have typical single‐domain, field‐dependent superparamagnetic relaxation properties. Finally, Mössbauer spectra and hyperfine magnetic fields at room temperature for the assemblies of Fe(C) nanoparticles confirm their distinct nanophases that were detected by structural analysis. Modified superparamagnetic relaxation is observed in the assemblies of Fe(C) nanoparticles, which is attributed to the nanocrystalline nature of the carbon‐coated nanoparticles.     

Strong solutions to the equations of electrically conductive magnetic fluids

We study the equations of flow of an electrically conductive magnetic fluid, when the fluid is subjected to the action of an external applied magnetic field. The system is formed by the incompressible Navier–Stokes equations, the magnetization relaxation equation of Bloch type and the magnetic induction equation. The system takes into account the Kelvin and Lorentz force densities. We prove the local-in-time existence of the unique strong solution to the system equipped with initial and boundary conditions. We also establish a blow-up criterion for the local strong solution.     

Ferrimagnetic behaviors in a double-wall cubic metal nanotube

A double-wall cubic metal nanotube consists of the ferromagnetic spin-1 inner shell and spin-3/2 surface shell. It is of the ferrimagnetic exchange coupling between two shells. Considering the single-ion anisotropy and transverse field exist together, the magnetization, the initial susceptibility, the internal energy and the specific heat have been investigated by using the effective-field theory with correlations. Some interesting phenomena have been found in the thermal variations of the system. Magnetization appears two or three compensation points in certain parameters. It is an unconventional ferrimagnetic behavior in the nanotube. The shapes of total magnetization and the initial susceptibility are great influenced by the surface exchange coupling, surface single-ion anisotropy and surface transverse field. Some results of nanotube may have potential applications in different research fields, such as electronics, optics, mechanics, and even biomedicine and molecular devices.