Effect of induced shielding current transmission in longitudinal direction on levitation force of melt grown single-domain YBa_2Cu_3O_(7-x) cylindrical superconductor

YBa2Cu3O7-x (YBCO) bulk is one of the most important high temperature superconducting materials for magnetic levitation applications, because it has a high magnetic irreversibility field Hirr at liquid nitrogen temperature, and can grow into large grains. The levitation force of YBCO bulk is proportional to the critical current density (Jc) and grain radius (r)[1], so higher Jc and r are appreciated for YBCO bulks to achieve higher levitation force. Now single-domain YBCO bulks up to s…     

Approaches to improving critical current density of YBCO superconducting thick films deposited by electrophoresis

The irreversibility field (Hirr) of Y-based superconductor is much higher than that of Bi-based superconductor. Y-based superconductor is capable of maintaining stable electrical currents in high magnetic field and electric field, so it is a better suited mate-rial for electric-current applications. Commonly, the Y-based tapes comprise a YBCO thick film deposited on a flexible substrate, typically with an intermediate buffer layer, and an overcoat of noble metal. In this process, the interm…     

Spectroscopic and X-ray diffraction study of high Tc epitaxial YBCO thin films obtained by pulsed laser deposition

We report spectroscopic characterization of epitaxial YBCO thin films grown on LaAlO₃ by pulsed laser deposition. Raman spectroscopy and spectroscopic ellipsometry were used for film characterization and the results were correlated with X-ray diffraction measurements. The mentioned techniques allowed us to analyze crystallographic, micro-structural, and morphological properties of YBCO thin films. We also demonstrated that relatively low resolution Raman spectroscopy and spectroscopic ellipsometry are reliable techniques for a rapid and non-destructive characterization of epitaxial YBCO thin films.     

High temperature superconducting thin films for microwave filters

YBa₂Cu₃O_7-δ and Tl₂Ba₂CaCu₂O₈ thin films for microwave filters were synthesized by pulsed laser deposition and the two-step thalliation process. Substrate quality requirements and the relation of thin film morphology, microstructure with microwave surface resistance were discussed.     

用电泳技术制备YBCO高温超导厚膜

介绍了电泳技术制备YBCO高温超导厚膜的实验方法和YBCO高温超导厚膜的电学性质测量 ,讨论了在学生小型科研实验或设计实验中开展此实验的学时安排、注意事项和实验内容的扩展 .     

TDPAC studies of Hf doped YBCO

Time differential perturbed angular correlation measurements of the 133–482 keVγ-γ cascade of¹⁸¹Ta in Hf-doped YBa₂Cu₃O_7−x are presented. The¹⁸¹Hf precurser nuclei are incorporated into the sample by thermal neutron irradiation. Two quadrupole interaction frequencies are observed in the as-irradiated sample:v _Q1=161±10 MHz with intensityf ₁=75%, asymmetry parameterη ₁=0.32 and damping parameter Λ₁=0.42, andv _Q2=1108±40 MHz withf ₂=25%,η ₂=0.62, and Λ₂=0.60. On annealing the sample in air at various temperaturesT _a and quenching to room temperature,f ₁ remained nearly constant forT _a<600°C andv _Q1 for all annealing temperatures indicating that these are insensitive to oxygen stoichiometry. This frequency is interpreted to be due to¹⁸¹Hf substitutingY sites. BeyondT _a=600°C,f ₁ increased and reached a constant value of 90% forT _a=800°C. The value ofv _Q2 showed a slight variation between 1086 and 1160 MHz, whilef ₂ remained nearly constant at 25% forT _a<600°C. This component is identified to be due to¹⁸¹Hf substituting Cu 1 sites in the Cu-O chains of YBCO. Above 600°Cv _Q2 decreased and reached a value of 808 MHz beyond 750°C.     

Thermal analysis and thermal expansion studies on high density YBa2−xLaxCu3O7−δ, 0x0.2

The compositions in the YBa_2−xLa_xCu₃O_7−δ (0x0.2) system were prepared by the solid state reaction, employing a novel high-temperature oxygen sintering route. The modified sintering route yields dense slab like microstructures with large grains. The decomposition (incongruent melting) temperature of the YBa₂Cu₃O_7−δ (Y-123) phase was found to shift to higher temperatures with increasing oxygen partial pressure and lanthanum content. Structure remained orthorhombic up to x=0.2 with a decrease in the orthorhombic strain ((b−a)/b). Iodometric titration indicated a systematic increase in the oxygen content with increasing lanthanum content. Thermo-gravimetric studies in various oxygen partial pressures revealed that the oxygen diffusion in to the YBa₂Cu₃O_7−δ (δ>0.5) lattice is an exothermic event and takes place at temperatures not less than 573 K. High-temperature thermal-expansion measurements in air indicated that the nonlinearity in thermal expansion behaviour was reduced by the substitution of lanthanum.     

金属基上以YSZ为过渡层的YBCO薄膜的微观结构

采用透射电子显微术（ＴＥＭ），研究了用磁控溅射技术在柔性金属基体上制备的、钇稳定的ＺｒＯ２（ＹＳＺ）为过镀层的ＹＢａ２Ｃｕ３Ｏ７－ｙ（ＹＢＣＯ）薄膜的横断面结构。所得ＹＢＣＯ膜的超导临界转变温度Ｔｃ为９１Ｋ，临界电流密度Ｊｃ＝２×１０３Ａ／ｃｍ２（７７Ｋ，０Ｔ）。基体为Ｎｉ基合金（ＨａｓｔｅｌｏｙＣ）。ＹＳＺ层为致密、均匀的细晶组织，约１２μｍ厚，具有织构取向，并与基体紧密连接。ＹＢＣＯ层的厚度不均匀，约５００ｎｍ；ＹＢＣＯ／ＹＳＺ界面有时连接较差，在该界面上有杂质出现，杂质有可能引发裂纹。     

晶化时间对ZSM-5/MCM-48复合分子筛结构及MTG反应性能的影响

采用两步晶化法制备ZSM-5/MCM-48微介孔复合分子筛,通过调变前驱体溶胶的晶化时间获得不同结构的ZSM-5/MCM-48基分子筛催化剂。采用XRD、N₂-吸附、SEM、TEM、FT-IR和Py-FTIR等手段进行表征,结果表明,前驱体溶胶的晶化时间对ZSM-5/MCM-48复合分子筛的结构和表面酸性产生重要的影响,而特定结构的复合分子筛基催化剂可以显著改变甲醇制汽油（MTG）反应的产物分布,与ZSM-5基催化剂相比显著降低了油品中芳烃和均四甲苯的含量。阐明了其催化作用机制是由于介孔结构的MCM-48对微孔结构的ZSM-5界面或表面的修饰作用。     

利用线性液膜的红外热像测定YBCO的湿法化学刻蚀启动时长

提出了一种测定YBCO(YBa2Cu3O7-x)高温超导薄膜湿法腐蚀启动时长的红外热像新方法。该方法的实质是利用YBCO腐蚀时必然有化学热吸收或释放,从而引起YBCO表面液膜温度变化这一特点,通过红外热像实时监测系统,采集液膜温度变化过程的红外热像,从而判断反应启动时长。理论分析和实验结果均表明,YBCO表面2 mm宽线性液膜是较为理想的监测对象,因其同时具备温度变化信息和空间分布信息,可以将线性液膜中心作为理想的观测特征点;由滑动腐蚀液滴形成残留线性液膜具有温度变化灵敏度高的特点,YBCO(衬底为LaAlO3)竖直放置,可以表面避免液膜重力对启动时长的影响,获得更为准确的监测数据。由线性液膜的横向剖面灰度变化得到在本实验条件下YBCO薄膜与体积比H3PO4∶H2O=1∶300腐蚀液的反应启动时长介于0.3~0.4 s之间。