Metal Organic Framework-235 (MOF-235) Modified Carbon Paste Electrode for Catechol Determination in Water

MOF-235 is presented as an orange powder, with crystals of the octahedral formation. It was already used as adsorbent to remove different compounds from water; however, no attempts have been published about the exploration of the MOF-235 application as electrochemical sensor for organic compounds yet. MOF-235 was synthetized and after that, it was characterized by SEM, XRD and FTIR. Graphite electrodes (GEs) were modified with different MOF-235 ratio (5 %, 7 %, 10 %, 12 % and 14 %) and these modified GEs were characterized by cyclic voltammetry (CV) measurements in order to determine the effect of MOF-235 concentration on the current response. Results indicated that, a significant improvement on the current response was attained at MOF-235(10 %)/GE respect to unmodified GE. This behavior is related to the pore structure and multiple active sites on the MOF surface. The performance of the MOF-235(10 %)/GE as electrochemical sensor for detecting catechol was assessed by differential pulse voltammetry (DPV). Catechol detection response of MOF-based sensor provided a detection limit of about 12.79 μmol L⁻¹ with a correlation coefficient (R²) of about 0.9928 ranging from 12 to 514 μmol L⁻¹. Finally, MOF-235(10 %)/GE was used to determine catechol in real water matrixes.     

MOF-808/Bi2MoO6复合材料的构筑及其光催化性能

采用简单的两步水热法制备出了锆基金属有机骨架和钼酸铋的复合材料MOF-808/Bi₂MoO₆。通过X射线粉末衍射、傅里叶红外光谱、扫描电子显微镜、透射电子显微镜、X射线光电子能谱、紫外可见漫反射光谱、N₂吸附-脱附测试和电化学测试对所制备材料的组成、微观结构、光学性质以及光生载流子的复合效率进行了分析。与纯Bi₂MoO₆和MOF-808相比,0.5%-MOF-808/Bi₂MoO₆复合材料展示出了较高的光催化活性,在可见光照射120 min时对抗生素环丙沙星(CIP)的降解率达89.7%。通过自由基捕获实验,证明了·O₂^-是主要活性物种,基于此我们提出了可能的光催化降解机理。     

锂参与合成MOF-5用于CO2/CH4混合气体分离

利用溶剂热法合成了不同锂含量的MOF-5(xLi-MOF-5, x=0, 1, 3, 5).在MOF-5结晶过程中,锂离子被合并入其骨架结构中.实验表明,合并入骨架的锂能够改变MOF-5的结构和表面化学性质.不同的xLi-MOF-5能够不同程度降低骨架相互穿插的程度从而导致其吸附分离能力的大幅改变.其中,3Li-MOF-5具有最高的二氧化碳捕获能力(5.47 mmol·g^-1),对40% CO₂/60% CH₄混合气体具有最优吸附选择性.     

多壁碳纳米管/聚丙烯酸/MOF-5的制备及其N_2吸附性能

用化学修饰法制备出复合物多壁碳纳米管/聚丙烯酸(MWCNTs/PAA),用溶剂热法合成Zn4O(1,4-benzenedicarboxylate)3(MOF-5)和MWCNTs/PAA/MOF-5。通过XRD、FTIR、TG、HRTEM和比表面积和孔隙度分析仪对MWCNTs,MOF-5,MWCNTs/PAA和MWCNTs/PAA/MOF-5的结构和性质进行表征。结果表明:复合材料MWCNTs/PAA中PAA包覆在碳纳米管外壁上,含量为4.3%,在FTIR中有PAA特征官能团的吸收峰;MWCNTs/PAA/MOF-5和MOF-5的形貌一样,MWCNTs/PAA/MOF-5的热分解温度比MOF-5的提高了49℃;MOF-5和MWCNTs/PAA/MOF-5的N2吸附曲线为Ⅰ型,77 K和100 k Pa条件下,N2的吸附量达到最大值,分别为265、299.03 cm3·g-1。     

Controlled Synthesis of Large Single Crystals of Metal-Organic Framework CPO-27-Ni Prepared by a Modulation Approach: In situ Single-Crystal X-ray Diffraction Studies

The size of single crystals of the metal-organic framework CPO-27-Ni was incrementally increased through a series of modulated syntheses. A novel linker modulated synthesis using 2,5-dihydroxyterephthalic acid and the isomeric ligand 4,6-dihydroxyisophthalic acid yielded large single crystals of CPO-27-Ni (∼70 μm). All materials were shown to have high crystallinity and phase purity through powder X-ray diffraction, electron microscopy methods, thermogravimetry, and compositional analysis. For the first time single-crystal structure analyses were carried out on CPO-27-Ni. High BET surface areas and nitric oxide (NO) release efficiencies were recorded for all materials. Large single crystals of CPO-27-Ni showed a prolonged NO release and proved suitable for in situ single-crystal diffraction experiments to follow the NO adsorption. An efficient activation protocol was developed, leading to a dehydrated structure after just 4 h, which subsequently was NO-loaded, leading to a first NO loaded single-crystal structural model of CPO-27-Ni.     

Observation of ZnO nanoparticles outside pores of nano Zn4O(C8H4O4)3 metal-organic framework

It was recognized that ZnO can be formed during synthesizing nano Zn₄O(C₈H₄O₄)₃ metal-organic framework (nano MOF-5). Furthermore, it is generally accepted that the ZnO is dispersed inside the pores of MOF-5. However, herein, the measurements of X-ray powder diffraction (XRD) and transmission electron microscopy (TEM) showed that the crystal particle sizes of ZnO in MOF-5 are in the range of 5-18 nm, which are larger than the pore size of MOF-5 (1.3 nm). This clearly demonstrates that those ZnO nanoparticles are located outside the pores of MOF-5.     

The Cu-MOF-199/single-walled carbon nanotubes modified electrode for simultaneous determination of hydroquinone and catechol with extended linear ranges and lower detection limits

A novel electrochemical sensor based on Cu-MOF-199 [Cu-MOF-199 = Cu₃(BTC)₂ (BTC = 1,3,5-benzenetricarboxylicacid)] and SWCNTs (single-walled carbon nanotubes) was fabricated for the simultaneous determination of hydroquinone (HQ) and catechol (CT). The modification procedure was carried out through casting SWCNTs on the bare glassy carbon electrode (GCE) and followed by the electrodeposition of Cu-MOF-199 on the SWCNTs modified electrode. Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM) were performed to characterize the electrochemical performance and surface characteristics of the as-prepared sensor. The composite electrode exhibited an excellent electrocatalytic activity with increased electrochemical signals towards the oxidation of HQ and CT, owing to the synergistic effect of SWCNTs and Cu-MOF-199. Under the optimized condition, the linear response range were from 0.1 to 1453 μmol L⁻¹ (R_HQ = 0.9999) for HQ and 0.1–1150 μmol L⁻¹ (R_CT = 0.9990) for CT. The detection limits for HQ and CT were as low as 0.08 and 0.1 μmol L⁻¹, respectively. Moreover, the modified electrode presented the good reproducibility and the excellent anti-interference performance. The analytical performance of the developed sensor for the simultaneous detection of HQ and CT had been evaluated in practical samples with satisfying results.     

锂参与合成MOF-5用于CO_2/CH_4混合气体分离

利用溶剂热法合成了不同锂含量的MOF-5(x Li-MOF-5,x=0,1,3,5)。在MOF-5结晶过程中,锂离子被合并入其骨架结构中。实验表明,合并入骨架的锂能够改变MOF-5的结构和表面化学性质。不同的x Li-MOF-5能够不同程度降低骨架相互穿插的程度从而导致其吸附分离能力的大幅改变。其中,3Li-MOF-5具有最高的二氧化碳捕获能力(5.47 mmol·g-1),对40%CO2/60%CH4混合气体具有最优吸附选择性。     

Positive dependence properties of elliptically symmetric distributions

Let X₁, …, X_p have p.d.f. g(x₁² + … + x_p²). It is shown that (a) X₁, …, X_p are positively lower orthant dependent or positively upper orthant dependent if, and only if, X₁,…, X_p are i.i.d. N(0, σ²); and (b) the p.d.f. of |X₁|,…, |X_p| is TP₂ in pairs if, and only if, In g(u) is convex. Let X₁, X₂ have p.d.f. $\text{f(x}{}_1\text{, x}{}_2\text{) =}\text{|Σ|}{}^{\mathrm{<mtext>?</mtext><mtext>1</mtext><mtext>2</mtext>}}\text{g((x}{}_1\text{, x}{}_2\text{)}\text{Σ}{}^{\mathrm{?1}}\text{(x}{}_1\text{, x}{}_2\text{)′)}$. Necessary and sufficient conditions are given for f(x₁, x₂) to be TP₂ for fixed correlation ?. It is shown that if f is TP₂ for all ? >0. then (X₁, X₂)′ ～ N(0, Σ). Related positive dependence results and applications are also considered.