选择性富集分离虎杖中白藜芦醇苷的分子印迹聚合物的制备及分子识别性能研究

以白藜芦醇苷(POL)为模板分子,分别以丙烯酰胺(AM)、4-乙烯基吡啶(4-VP)、甲基丙烯酸羟乙酯(HEMA)、甲基丙烯酸(MAA)为功能单体,二甲基丙烯酸乙二醇酯(EGDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用本体聚合法制备白藜芦醇苷分子印迹聚合物。采用静态平衡结合实验研究了印迹聚合物对模板分子及不同底物的识别性能。结果表明,以丙烯酰胺为功能单体的印迹聚合物(MIP1)对模板分子的识别性能最好,其次是以4-VP为功能单体的聚合物(MIP2),以HEMA为功能单体的聚合物(MIP3)以及以MAA为功能单体的聚合物(MIP4)的分子识别性能较差。表明功能单体与模板分子之间相互作用的强弱对MIP的识别能力有较大的影响。静态平衡结合法以及Scatchard分析法表明,MIP1对模板分子呈现较好的结合能力和选择性,该印迹聚合物中形成了2类不同的结合位点,离解常数分别为7.43×10-5、3.70×10-3mol/L。将MIP1用于虎杖提取物中POL的固相萃取分离,效果良好。     

Molecularly Imprinted Polypyrrole for DNA Determination

In this study graphite electrodes modified by a thin DNA‐imprinted polypyrrole layer, which was able to bind specific target‐DNA, are reported. For this aim, electrochemical synthesis of polypyrrole was performed on a pencil graphite electrode by cyclic voltammetry (CV) or by potential pulse sequences (PPS). The modified electrode surface was used for electrochemical determination of target‐DNA by differential pulse voltammetry. According to our best knowledge this is a first report on the application of DNA‐imprinted polymer for the determination of target‐DNA. The results showed that the molecularly imprinted polypyrrole (MIPPy) layer that formed on the carbon electrode surface was sensitive for target‐DNA, while the nonimprinted polypyrrole layer was not sensitive to the same target‐DNA. Comparison of electrodes modified using PPS and CV techniques is presented.     

液晶分子印迹整体柱的制备及其分子识别热力学

液晶分子印迹聚合物(MIPs)因刚性液晶单体的加入而在超低交联度水平下也能印迹和识别模板分子,有效解决了传统MIPs因高交联度造成的位点包埋、结合容量低、传质慢等问题。尽管液晶MIPs具有如此独特的优势,但却面临着由于交联度的大幅度降低而导致印迹效果下降的问题。为了研究液晶MIPs的结合特性,制备具有良好印迹效果的低交联液晶MIPs,该文通过二次接枝聚合,制备了一系列不同交联度的液晶分子印迹整体柱,用高效液相色谱法研究了聚合参数与印迹整体柱亲和性的关系。实验中选用三羟甲基丙烷三甲基丙烯酸酯(TRIM)为交联剂,以甲苯和十二醇为致孔剂合成整体柱骨架,并在此基础上以(S)-萘普生为模板,加入液晶单体4-氰基苯基单环己基乙烯(CPCE)进行二次聚合接枝。实验中系统考察了流动相中乙腈比例及缓冲液pH值对色谱保留的影响,结果发现液晶单体的加入使得MIPs对萘普生保留控制机制由原来的氢键作用变为了疏水作用;通过动态吸附实验得到的突破曲线经前沿分析及对吸附等温线Langmuir、Freundlich和Scatchard分析拟合,发现交联度为15%时液晶MIPs印迹因子最大(3.78)、非均一性最强,且特异性吸附量高于非特异性吸附量。液晶MIPs的计量置换模型(SDM-R)分析表明,液晶印迹整体柱对模板分子的总亲和力(ln A=0.645)明显高于其类似物;而从空间匹配程度看,与液晶印迹整体柱空间匹配程度最高的是酮洛芬而非模板分子,但液晶印迹整体柱对酮洛芬的总亲和力(ln A=0.242)不及模板分子的一半,表明在本低交联液晶印迹系统中,空间效应不是决定印迹系统识别能力的主要因素。进一步的分离热力学研究发现,低交联液晶印迹柱的|ΔΔH|<T|ΔΔS|,而交联度为70%的非液晶MIPs柱的|ΔΔH|>T|ΔΔS|,表明液晶MIPs的分离过程是一个熵控制过程,而常规无液晶MIPs的分离过程是一个焓控制过程。上述结果表明,液晶单体的加入改变了MIPs的识别机制,适当的低交联度可显著提高液晶MIPs的识别性能,因此液晶MIPs这些特质有望使其成为新一代的MIPs。     

A High Sensitivity Electrochemical Sensor Based on Fe3+‐Ion Molecularly Imprinted Film for the Detection of T‐2 Toxin

The excellent detection sensitivity in various matrices of T‐2 toxin (T‐2), which has cytotoxic and immunosuppressive effects in DNA and RNA synthesis, is a highly desirable characteristic. A sensitive molecularly imprinted electrochemical sensor was constructed for the selective detection of T‐2. In this study, iron ions (Fe³⁺) were introduced to increase the chelation of the metal ions and templates for preparing molecularly imprinted polymers (MIPs). With the increased chelation of the metal ions and templates, the selectivity and sensitivity of the MIPs were effectively improved. The imprinted sensor was successfully employed to detect T‐2 in cereals and human serum samples.     

A novel molecular imprinting polymer for the selective adsorption of D-arabinitol from spiked urine

In this research, molecular imprinting polymers (MIPs) for D-arabinitol were synthesized using a bulk polymerization method through a noncovalent approach. The MIPs were prepared by using D-arabinitol as a template, acrylamide as a functional monomer, ethylene glycol dimethacrylateas cross-linker, benzoyl peroxide as an initiator and dimethyl sulfoxideas a porogen. MIPS was synthesized in several formulas with a different molar ratio of template to functional monomers and cross-linker. Fourier-transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM) were used to characterize the MIPs produced. A batch rebinding assay was used to test the binding efficiency of each formula. Batch rebinding test results revealed that MIPsF3 with a molar ratio of the template: monomer and crosslinker ratio respectively (1: 4: 25) had the highest binding capacity at 1.56 mgg ^-1 . The results of isotherm adsorption showed that the MIPs produced followed the Freundlich equation with an R-value of 0.97. The MIPs produced was also selective toward its isomeric compounds (i.e. L-arabinitol, adonitol, xylitol, and glucose). The extraction efficiency of the MIPs against D-arabinitol was 88.98%.     

分子印迹膜的制备研究进展

将分子印迹技术与膜分离技术相结合的分子印迹膜,由于其高选择性,近年来受到了国内外研究者的广泛关注.本文初步探讨了分子印迹膜(MIM) 的两种分离机理以及目前主要的制备方法:同步法和复合法.     

Molecular Recognition Ability of Molecularly Imprinted Polymer Nano- and Micro-Particles by Reversible Addition-Fragmentation Chain Transfer Polymerization

The role of molecularly imprinted polymers (MIPs) is changing from academic to applied researches. Challenging problems about MIP will be more highlighted in applicable uses and solving these problems is vital. The controlled/“living” radical polymerization (CLRP) techniques are applicable to solve the challenging problems in MIPs. The “living” nature of CLRP helps to improve the heterogeneity of binding sites in MIPs as a main challenge where precise control over sizes, compositions, and surface functionalities is achieved. Among different techniques of CLRP, reversible addition-fragmentation chain transfer (RAFT) technique presents distinguished benefits such as compatibility and tolerance to a wide range of functional monomers and mild reaction conditions rather than other CLRP techniques. In this review, in order to obtain more insights into the potential benefits of RAFT polymerization in fabrication of nano and micro MIP networks, recent research in advanced MIP materials for different templates with improved morphology, efficiency, and binding capacities with respect to traditional free radical polymerization (FRP) will be discussed. MIPs prepared via RAFT method have advantages of MIPs as high performance molecular recognition devices and CLRP as controllable polymerization mechanism, simultaneously.     

基于分子印迹技术的吸附材料制备与应用进展

在简要介绍超分子理论的基础上,综述了分子印迹微球和分子印迹膜的制备方法,介绍了其在吸附金属、吸附脱硫、吸附有机小分子以及吸附蛋白质等方面的应用进展。     

Preparation,evaluation and characterization of quercetin-molecularly imprinted polymer for preconcentration and clean-up of catechins

Molecularly imprinted polymer (MIP) for solid extraction and preconcentration of catechins have been successfully prepared by a thermal polymerization method using quercetin as template, 4-vinylpyridine as functional monomer and ethylene glycol dimethacrylate as crosslinker. A solution mixture of acetone and acetonitrile was used as porogen. Systematic investigations of the influence of monomer, cross-linker, porogen, as well as polymerization conditions on the properties of the MIPs were carried out. The quercetin MIPs were evaluated according to their selective recognition properties for quercetin, structurally related compounds (catechin, epigallocatechin gallate and epicatechin) and a unrelated compound of similar molecular size (α-tocopherol). Good binding was observed for quercetin, catechin and epigallocatechin gallate with an optimized MIP in a solid phase extraction system. Adsorption and kinetic characteristics were evaluated for catechins which indicated that the synthesized polymer had high adsorption capacity and contained homogeneous binding sites. Chemical and morphological characterization of the MIP was investigated by FTIR, SEM and BET, which confirmed a high degree of polymerization. Finally, the MIP was successfully applied to the clean-up and preconcentration of catechins from several natural samples.     

Preparation of high selective molecularly imprinted polymers for tetracycline by precipitation polymerization

High selective molecularly imprinted polymers(MIPs) for tetracycline have been prepared by precipitation polymerization. Effects of monomer and solvent,the ratio of monomer and template and the characterization of the polymer were investigated by frontal chromatography and selectivity experiment.The results clearly indicated that the polymer,which had the highest molecular recognition abilities for tetracycline antibiotics,had been received.