Towards the synthesis of MAX-phase functional coatings by pulsed laser deposition

Pulsed laser deposition with a Nd:YAG laser was used to grow thin films from a pre-synthesized Ti₃SiC₂ MAX-phase formulated ablation target on oxidized Si(1 0 0) and MgO(1 0 0) substrates. The depositions were carried out in a substrate temperature range from 300 to 900 K, and the pressure in the deposition chamber ranged from vacuum (10⁻⁵ Pa) to 0.05 Pa Argon background pressure. The properties of the films have been investigated by Rutherford backscattering spectrometry for film thickness and stoichiometric composition and X-ray diffraction for the crystallinity of the films. The silicon content of the films varied with the energy density of the laser beam. To suppress especially the silicon re-sputtering from the substrate, the energy of the incoming particles must be below a threshold of 20 eV. Therefore, the energy density of the laser beam must not be too high. At constant deposition energy density the film thickness depends strongly on the background pressure. The X-ray diffraction measurements show patterns that are typical of amorphous films, i.e. no Ti₃SiC₂ related reflections were found. Only a very weak TiC(2 0 0) reflection was seen, indicating the presence of a small amount of crystalline TiC.     

Pt immobilized spontaneously on porous MXene/MAX hybrid monolith for hydrogen evolution reaction

Designing efficient electrocatalysts with low Pt loadings for hydrogen evolution reaction(HER) is urgently required for renewable and sustainable energy conversion.Here,we report a strategy that Pt nanoparticulates are spontaneously immobilized on porous MXene/MAX monolith as HER catalysts by utilizing the redox reaction between Ti_3C_2T_x MXene and [PtCl_4]~2 in H_2 PtCl_6 aqueous solution.By taking advantage of homogeneously distributed Pt nanoparticulates on highly electrically conductive porous Ti_3C_2T_x/Ti_3AlC_2 monolith,the as-prepared electrocatalysts show high catalytic performance for hydrogen evolution.Specifically,the binder-free electrocatalysts have Pt loadings as low as 8.9 μg/cm~2,with low overpotential of 43 mV at a curre nt density of 10 mA/cm~2 and low Tafel slope that three times lower than porous Ti_3C_2T_x/Ti_3AlC_2 without Pt loading.This strategy offers a new approach to constructing ultra-low Pt-loading HER catalysts on the basis of in situ redox reaction between noble metal ions and MXenes.     

Theoretical stability,thin film synthesis and transport properties of the Mon +1GaCn MAX phase

The phase stability of Mo_{n +1}GaC_n has been investigated using ab‐initio calculations. The results indicate stability for the Mo₂GaC phase only, with a formation enthalpy of –0.4 meV per atom. Subsequent thin film synthesis of Mo₂GaC was performed through magnetron sputtering from elemental targets onto Al₂O₃ [0001], 6H‐SiC [0001] and MgO [111] substrates within the temperature range of 500 °C and 750 °C. High structural quality films were obtained for synthesis on MgO [111] substrates at 590 ºC. Evaluation of transport properties showed a superconducting behavior with a critical temperature of approximately 7 K, reducing upon the application of an external magnetic field. The results point towards the first superconducting MAX phase in thin film form. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

三元层状MAX相固溶体研究进展

MAX相是一类具有层状结构的三元碳化物或(和)氮化物,M是过渡金属元素,A主要是ⅢA~ⅤA族元素,X是C或N元素。这类化合物兼具陶瓷材料和金属材料的特点,具有优异的导电、导热、耐腐蚀以及抗氧化等性能,在诸多领域具有潜在应用价值。近年来,新元素、新结构和固溶体MAX相的不断出现,进一步扩展了MAX相家族。固溶体MAX相是将合适的元素固溶到已知MAX相中而得到的新MAX相。本文分四类总结了127种MAX相固溶体,对其结构改变和性能调控进行了概括,并指出目前研究存在的理论问题和亟须解决的关键技术,最后对MAX相固溶体的发展进行了预测和展望。     

用AT89C51单片机和MAX505 DAC研制的程控信号源

本文介绍了用单片机AT89C51和MAX505 DAC制作程控信号源的原理,并在其中对AT89C51单片机和MAX505 DAC的工作原理及特性,怎样用单片机的中断控制和串行接口控制作为重点给予了阐述。     

Synthesis of Carbon/Sulfur Nanolaminates by Electrochemical Extraction of Titanium from Ti2SC

Herein we electrochemically and selectively extract Ti from the MAX phase Ti₂SC to form carbon/sulfur (C/S) nanolaminates at room temperature. The products are composed of multi‐layers of C/S flakes, with predominantly amorphous and some graphene‐like structures. Covalent bonding between C and S is observed in the nanolaminates, which render the latter promising candidates as electrode materials for Li‐S batteries. We also show that it is possible to extract Ti from other MAX phases, such as Ti₃AlC₂ , Ti₃SnC₂ , and Ti₂GeC, suggesting that electrochemical etching can be a powerful method to selectively extract the “M” elements from the MAX phases, to produce “AX” layered structures, that cannot be made otherwise. The latter hold promise for a variety of applications, such as energy storage, catalysis, etc.     

Pressure-enforced plasticity in MAX phases: from single grain to polycrystal investigation

Ti₄AlN₃, Ti₃AlC₂ and Ti₃Al_0.8Sn_0.2C₂ MAX phases were plastically deformed at room temperature (RT) under gaseous confining pressure. Microstructures of as-grown and deformed samples are carefully analysed using scanning electron microscopy (SEM), atomic force microscopy (AFM) and transmission electron microscopy (TEM). It is demonstrated that high level of plastic deformation can be reached under confining gas pressure; the later suppresses the brittle failure at RT to the profit of plasticity. Multiscale characterization techniques are shown to provide a unique insight into all the scales of the plastic deformation; in particular, the effect of the mesoscale. Indeed, grain shape and orientation relative to the compression axis are shown to play a key role in the deformation process, intergranular stresses leading to a complex stress field in the polycrystalline samples. The TEM results show that dislocation activity highly depends on the grain orientation. The observation of dislocation entanglements unambiguously demonstrates that dislocations may be organized in such a configuration so that their glide in the basal plane can be hindered when deep plastic regime is reached.     

Physical insight of superconductivity of Nb2AlC: in situ Raman spectrometry investigation

Superconductivity of Nb₂AlC has been previously reported, but the origin is not clear. In this paper, in situ Raman spectra of Nb₂AlC are measured in the temperature range from 80 to 380 K at ambient pressure. The line‐width of E_2g (ω₁) mode increases with temperature which originates from the anharmonic phonon–phonon scattering. On the contrary the line‐widths of E_2g (ω₂) and A_1g (ω₄) modes decrease continuously at elevated temperature. The phenomenon is explained by the electron–phonon coupling. The origin of superconductivity is therefore interpreted by the coupling of Nb 4d electrons with E_2g (ω₂) and A_1g (ω₄) phonon modes. Copyright © 2013 John Wiley & Sons, Ltd.     

大豆糖蛋白的结构研究

应用NaClO2-HOAc提取结合层析柱提纯, 从大豆细胞壁物质(膳食纤维)中分离出PRF3纯组分。这是一种富含羟脯氨酸的糖蛋白, 本文对其结构特征作详尽剖析。结果表明, PRF3多糖部分的主链结构是由β(1→4)糖苷键连接的半乳聚糖,主链通过3-C分支点连接由α(1→3)键连的低聚阿拉伯糖侧链, 多糖与多肽之间通过HPr-Ara和Ser-Gal糖苷键连接在一起。     

大豆木糖葡聚糖的结构研究

利用4mol·dm^-^3NaOH提取结合层析柱提纯, 从大豆细胞壁物质(膳食纤维)中分离出PRF6聚合物组分(即木糖葡聚糖)。通过酸水解、酸部分水解、纤维素酶降解和甲基化等分析方法, 借助气相色谱和色质联用等现代仪器, 对该组分的结构特征作了详尽的剖析。结果表明其主链结构是由β(1→4)糖苷键连接的葡聚糖, 主链在6-C位置带有吡喃木糖残基作为侧键, 部分木糖残基在2-C位置还连有阿拉伯呋喃糖或半乳吡喃糖残基。