3-(3′-吡啶基)-6-芳基-1，2，4-三唑并[3，4-b]-1，3，4-噻二唑衍生物基态和激发态性质

用密度泛函B3LYP方法对3-(3'-吡啶基)-6-芳基-1,2,4-三唑并[3,4-b]-1,3,4-噻二唑衍生物(芳基为苯基、3-吡啶基和苯乙烯基)进行基态几何构型全优化,计算分子的电离势I_p和电子亲和势E_A等相关能量,并用Zerner间略微分重叠(ZINDO)和含时密度泛函(TDDFT)方法计算吸收光谱,用单组态相互作用方法(CIS)优化三种化合物分子的S_1激发态结构,分析其能量与发射光谱的关系,计算溶剂中分子的吸收和发射光谱,并与实验结果对照.计算结果表明,从3-(3'-吡啶基)-6-苯基-1,2,4-三唑并[3,4-b]-1,3,4-噻二唑分子(化合物A)到3-(3'-吡啶基)-6-(3'-吡啶基)-1,2,4-三唑并[3,4-b]-1,3,4-噻二唑分子(化合物B)以及3-(3'-吡啶基)-6-对乙烯苯基-1,2,4-三唑并[3,4-b]- 1,3,4-噻二唑分子(化合物C)的电子亲和势依次增大,愈来愈容易接受电子,吸收光谱和发射光谱红移.     

稀土磷酸盐发光材料的微波合成

稀土磷酸盐发光材料的微波合成徐文国，田一光，刘淼，刘海堂，方光华，庞文琴（吉林大学化学系，环境科学系，长春，１３００２３）关键词微波合成，稀土磷酸盐，微晶玻璃，玻璃态，发光材料稀土磷酸盐发光材料的研究是当前材料科学的热门研究课题。它们一般通过高温固相...     

Luminescent dendrimers as ligands for metal ions

Suitably designed luminescent dendrimers can play a role of ligands for luminescent and non-luminescent metal ions. This combination leads to species capable of exhibiting interesting and unusual properties, including (i) shielding excited states from quenching processes, (ii) light harvesting, (iii) conversion of incident UV light into visible or infrared emission, and (iv) metal ions sensing with signal amplification.     

Investigation of the luminescent properties of terbium-anthranilate complexes and application to the determination of anthranilic acid derivatives in aqueous solutions

The luminescent properties of terbium complexes with furosemide (FR), flufenamic (FF) acid, tolfenamic (TF) acid and mefenamic (MF) acid have been investigated in aqueous solutions. For all four compounds, complexation occurs when the carboxylic acid of the aminobenzoic group is dissociated and is greatly favoured in the presence of trioctylphosphine oxide as co-ligand and Triton X-100 as surfactant. Under optimum conditions, luminescence of the lanthanide ion is efficiently sensitised and the lifetime of the resonance level of terbium in the complex is ranging between 1 and 1.9 ms, against 0.4 ms for the aqua ion. The sensitivity of the method for the determination of anthranilic acid derivatives is improved by one to two orders of magnitude with respect to that achieved using native fluorescence or terbium-sensitised luminescence in methanol. The limits of detection are 2×10⁻¹⁰, 5×10⁻¹⁰ and 2×10⁻⁹ mol l⁻¹ for flufenamic acid, furosemide and tolfenamic acid, and mefenamic acid, respectively, with within-run RSD values of less than 1%. The method has been applied to the determination of flufenamic acid in spiked calf sera with and without sample pretreatment. Depending on the method and the analyte concentration, the recovery was ranging between 83 and 113% and the lowest concentration attainable in serum samples was close to 1×10⁻⁷ mol l⁻¹.     

One-pot synthesis of 1-aryl-3-methyl-1,3-dienes using methallyl(trimethyl)silane and aldehydes and their low temperature (Z)→(E) isomerization induced by sulfur dioxide

2-Methylprop-2-ene-1-sulfonyl fluorides can be easily prepared via the ene reaction of methallylsilanes and SO₂. In the presence of a base, aldehydes and 2-methylprop-2-ene-1-sulfonyl fluorides give 1,3-(E) and (Z)-dienes. Their (Z)→(E) isomerization by classical means fails or leads to their polymerization. It is shown that SO₂ can isomerize 1-aryl-3-methyl-1,3-dienes at low temperature, without formation of sulfolenes (cheletropic addition/elimination). Preliminary mechanistic studies suggest that SO₂ adds to 1,3-dienes forming 1,4-diradical intermediates that are responsible for the (Z)→(E) isomerizations.     

Two coordination polymers based on 2,2′-biimidazoles and d10 metal ions: syntheses,structures, and luminescence

Two d¹⁰ metal coordination polymers, [Zn(µ-Me₂biim)Cl₂] _n (1) and [Cd₃(MeHbiim)₂(1,4-BDC)₃] _n (2) (Me₂biim?=?N,N′-dimethyl-2,2′-biimidazole, MeHbiim?=?N-methyl-2,2′-biimidazole, 1,4-BDC?=?1,4-benzenedicarboxylate), were synthesized under hydrothermal conditions and characterized by elemental analysis, infrared spectroscopy, thermogravimetric analysis, and single-crystal X-ray crystallography. Complex 1 features an infinite neutral zigzag 1-D chain. Interchain hydrogen-bonding interactions further extend the 1-D arrangement to generate a 2-D supramolecular architecture. Complex 2 features a 3-D coordination polymer with α-Po net topology, based on linear trinuclear {Cd₃O₁₄N₄} clusters. Both complexes have high thermal stability and exhibit strong luminescence at room temperature.     

含绿色荧光蛋白发色团双自由基分子的非线性光学性质

采用密度泛函理论(DFT)方法研究了系列含绿色荧光蛋白发色团双自由基分子光学异构体的几何结构、极化率(αs)和第一超极化率(βtot).结果表明,引入电子给受体取代基使分子的极化率增大,而对第一超极化率有不同影响.对于光照前的反式结构,引入电子受体βtot值增加,且βtot值随取代基吸电子能力的增强而增大;引入电子给体βtot值降低,且βtot值随取代基给电子能力的增强而减小.当分子变成相应的顺式结构时,其βtot值变化趋势与反式结构的结果正好相反.光异构化前后分子的βtot值变化不同,引入电子受体使顺式结构的βtot值比反式结构的小,其中―NO2使顺式结构的βtot值减小为反式结构的1/6;引入电子给体使反式结构的βtot值比顺式结构的小,其中―NH2使反式结构的βtot值减小为顺式结构的1/6.从而,光异构化起到调节非线性光学(NLO)响应的作用.     

Rational design of donor–π–acceptor n-butyl-1,8-naphthalimide-cored branched molecules as charge transport and luminescent materials for organic light-emitting diodes

Four D–π–A bipolar molecules with n-butyl-1,8-naphthalimide (BNI) fragments as acceptors, acetylenes as π-spacers, and different aromatic groups as donors have been designed to explore their optical, electronic, and charge transport properties as charge transport and luminescent materials for organic light-emitting diodes (OLEDs). The frontier molecular orbitals (FMOs) and local density of states analysis have turned out that the vertical electronic transitions of absorption and emission are characterized as intramolecular charge transfer (ICT). The calculated results show that their optical and electronic properties are affected by the different donors of the bipolar molecules. Our results suggest that D–π–A 1,8-naphthalimide derivatives with donors triphenylamine (1), 1-nitrobenzene (2), anisole (3), and 4-phenylbenzo[c][1,2,5]thiadiazole (4) fragments are expected to be promising luminescent materials. Furthermore, 2–4 are expected to be promising candidates for both electron and hole transport materials as well as potential ambipolar charge transport material, whereas BNI and 1 can serve as hole transfer materials only. We have also predicted the mobility of 4 with better performance in three different space groups. On the basis of investigated results, we proposed a rational way for the design of charge transport and/or luminescent materials simultaneously.     

A Novel d-f Heterometallic CdII-EuIII Metal-organic Framework as a Sensitive Luminescent Sensor for the Dual Detection of Ronidazole and 4-Nitrophenol

A novel three-dimensional (3D) d-f heterometallic metal-organic framework (MOF) formulated as [EuCd_1.5L₂(H₂O)₃] · 2H₂O ( 1 ) [H₃L = 5-(4-(tetrazol-5-yl)phenyl)isophthalic acid] was successfully synthesized and characterized. Structural analysis displays that 1 features a 3D (3, 12)-connected framework constructed by [Eu₂Cd₃(tetrazole)₄(COO)₈] units. The powder X-ray diffraction measurement of 1 immersed in different solvents reveals that 1 possess good solvent stability. It is worth noting that 1 displays highly selective detection for ronidazole (RDZ) and 4-nitrophenol (4-NP) through luminescence quenching. The possible mechanism of luminescent sensing is also well discussed.     

Determination of human IgG by solid-substrate room-temperature phosphorescence immunoassay based on an antibody labeled with nanoparticles containing rhodamine 6G luminescent molecules

Luminescent 50-nm silicon dioxide nanoparticles containing both types of rhodamine 6G (R; particles denoted R-SiO₂) were synthesized by the sol–gel method. In the presence of Pb(Ac)₂ as a heavy atom perturber the particle can emit the intense and stable room-temperature phosphorescence (RTP) signal of R on a polyamide membrane, with _ex^max/_em^max=470/635 nm for R. Our research indicates that the specific immune reaction between goat-anti-human IgG antibody labeled with R-SiO₂ and human IgG can be carried out quantitatively on a polyamide membrane, and the phosphorescence intensity was enhanced after the immunoreaction. Thus a new method for solid-substrate room-temperature phosphorescence immunoassay (SS-RTP-IA) for determination of human IgG was established on the basis of antibody labeled with the nanoparticles containing binary luminescent molecules. The linear range of this method is 0.0624–20.0 pg spot^–1 of human IgG (corresponding to a concentration range of 0.156–50.0 ng mL^–1, sample volume 0.40 L spot^–1). The regression equations of the working curves are I_p=71.27+7.208m_IgG (pg spot^–1) (r=0.9996). Detection limits calculated as 3S_b/k are 0.022 pg spot^–1. Compared with the same IA using fluorescein isothiocyanate (FITC) as the marker the new method was more sensitive and had a wider linear range. After elevenfold replicate measurement RSD are 4.5 and 3.6% for samples containing 0.156 and 50.0 ng mL^–1 IgG, respectively. This method is sensitive, accurate, and of high precision.