Synthesis and characterization of linear tetrablock quarterpolymers of styrene,isoprene, dimethylsiloxane,and 2-vinylpyridine

A series of five tetrablock quarterpolymers of styrene, isoprene, dimethylsiloxane, and 2-vinylpyridine with molecular weights varying from 117 × 10³ to 177 × 10³ and having different compositions were synthesized. The synthesis was based on recent advances in the controlled high-vacuum anionic polymerization of hexamethylcyclotrisiloxane and on the selective linking of poly(dimethylsiloxane)lithium with the chlorosilane group of the heterofunctional linking agent chloromethylphenylethylene dimethylchlorosilane. Combined characterization results by size exclusion chromatography, membrane osmometry, and NMR spectroscopy suggested that the synthesized multiblock multicomponent polymers had a high degree of structural and compositional homogeneity. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 514–519, 2004     

端基含葡氨糖衍生物的聚乳酸的合成与表征

端基含葡氨糖衍生物的聚乳酸的合成与表征张国栋冯新德（北京大学高分子科学与工程系北京１００８７１）顾忠伟（国家计生委科研所药化室北京１０００８１）关键词壳多糖，聚乳酸，生物医用材料，化学修饰自从发现高分子量聚乳酸在人体内能够降解，并把这类材料引入...     

Thermal behavior of polyacrylonitrile polymers synthesized under different conditions and comonomer compositions

Polyacrylonitrile (PAN) polymers are used as precursors for carbon fiber production. This process requires an oxidative stabilization step, which can be studied by differential scanning calorimetry (DSC). In this sense, thermal behavior of PAN based terpolymers by different polymerization processes, compositions and itaconic acid concentrations in the reaction media were investigated. The obtained results showed that the addition of itaconic acid and methyl acrylate as comonomers resulted a lower heat flow during the process comparing to the PAN homopolymer. It suggested that these comonomers aid the oxidative stabilization stage for all studied process. The redox system polymerization at 40°C resulted in a lower heat flow. Itaconic acid decreases slightly initial and peak temperatures of the terpolymer and heat flow until concentration of 3y. The cyclization temperature decreases when MAis incorporated into the terpolymer compared to the MMA terpolymer and increases when MAA is the acidic monomer. Among terpolymers the AN/MA/AA polymer showed the best thermal behavior for carbon fiber producing.     

Rheology of asphalts modified with glycidylmethacrylate functionalized polymers

Asphalt is known to be a colloidal suspension in which asphaltenes are covered by a stabilizing phase of polar resins and form complex micelles that are dispersed in the oily maltenic phase. In order to enhance its mechanical properties (e.g., in road paving), asphalts are often loaded with polymeric materials, thereby obtaining blends that can have different physical or chemical structures, depending on the composition of the added polymer. Asphalts modified by the addition of reactive ethylene terpolymers were prepared and their dielectric and rheological properties were measured both before and after a cure at high temperature. Even if it is not possible to determine the exact nature of the chemical interactions between asphalt and polymer, master curves obtained from dynamic data clearly show that during the cure the material tends to the behavior of a cross-linked network.     

New benzodithiophene-pyrrolopyrroledione-thienopyrazine random terpolymers for organic photovoltaics

New random ternary copolymers containing fragments of pyrrolo[3,4-c]pyrrole-1,4-dione, 2,3-bis[6-fluoro-9-(2-octyl- dodecyl)-9H-carbazol-3-yl]-3,3′-[5,7-di(thiophen-2-yl)- thieno[3,4-b]pyrazine as electron-withdrawing fragments and benzodithiophene as an electron-donor block have been synthesized. The best power conversion efficiency of 9.18% was achieved for the terpolymer with pyrrolopyrroledione/ thienopyrazine ratio of 1:3. The introduction of the third thieno[3,4-b]pyrazine acceptor block into the structure of the ‘parent’ binary polymer can significantly adjust energy levels and the light absorption range of irregular copolymers, and can enhance photovoltaic properties due to improved absorption capacity and charge transfer.     

Isotactic poly(propylene‐co‐1‐pentene‐co‐1‐hexene) terpolymers: Synthesis,molecular characterization,and evidence of the trigonal polymorph

Terpolymers based on propylene with 1‐pentene and 1‐hexene as comonomeric units are satisfactorily synthesized using a metallocene catalyst. Thus, several terpolymers are prepared with distinct overall compositions in comonomers as well as three different 1‐pentene/1‐hexene ratios at a given composition to evaluate the influence on polymerization activity, intrinsic viscosity, and microstructural details. The new trigonal δ polymorph is observed in those quenched terpolymers with a global content in comonomers of about 14 mol %, independently of the ratio between both comonomers. However, preliminary results indicate a profound influence of that ratio on the crystallization rate. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3251–3259     

Highly improved crystallization behavior of poly(L‐lactide) induced by a novel nucleating agent: substituted‐aryl phosphate salts

In this work, a novel nucleating agent (NA) based on substituted‐aryl phosphate salts was introduced into poly(L‐Lactide) (PLLA). The nonisothermal and isothermal crystallization behaviors of nucleated PLLA samples were investigated through differential scanning calorimetry (DSC), wide angle X‐ray diffraction, and polarized optical microscope (POM). Furthermore, the effect of annealing treatment on the cold crystallization behaviors of nucleated samples was also investigated. The results show that the crystallization of PLLA, whether for the melt crystallization (including nonisothermal and isothermal crystallization process) or for the cold crystallization (including the cold crystallization occurring during the DSC heating process and during the annealing process), is greatly dependent upon the content of NA. At relatively lower NA content (≤0.1 wt%), the nucleation effect of NA is inconspicuous, however, at higher NA content (≥0.2 wt%), it exhibits great nucleation effect for the crystallization of PLLA. Further results show that the double endothermic peak of PLLA depends on the temperature applied for the crystallization. Copyright © 2012 John Wiley & Sons, Ltd.     

Polymerization of lactide and synthesis of block copolymer catalyzed by copper(Ⅱ) Schiff base complex

In the present investigation, the novel copper Schiff base complex was synthesized and its catalytic activity was evaluated for the ring-opening polymerization (ROP) of lactide and block polymerization of poly(lactide) with poly(ethylene glycol)methyl ether.     

Highly conductive soluble terpolymers of aniline,toluidine, and o‐aminobenzoic acid/m‐aminobenzenesulfonic acid

Two series of terpolymers, one of o‐/m‐toluidine and aniline with o‐aminobenzoic acid and the other of o‐/m‐toluidine and aniline with m‐aminobenzenesulfonic acid, have been synthesized by oxidative polymerization via an emulsion method with ammonium persulfate as the oxidant and HCl as the external dopant. The terpolymers exhibit excellent solubility and retain the high conductivity (∼1 S cm⁻¹) characteristic of the unsubstituted homopolymer, polyaniline. The terpolymers also possess higher thermal stability than polyaniline. This can be attributed to the presence of internal doping groups and substituents, which introduce flexibility to the otherwise rigid polyaniline backbone. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3040–3048, 2005