双冠醚钾电极的研究 II: 酮型、醇型和烃型双(4'-苯并-15-冠-5)为载体的钾离子选择电极

本文报道12种酮型, 醇型和烃型双(4'-苯并-15-冠-5)PVC膜钾离子选择电极的性能。     

Aluminum thin film enhanced IR nanosecond laser-induced frontside etching of transparent materials

Laser processing of glass is of significant commercial interest for microfabrication of precision optical engineering devices. In this work, a laser ablation enhancement mechanism for microstructuring of glass materials is presented. The method consists of depositing a thin film of aluminum on the front surface of the glass material to be etched. The laser beam modifies the glass material by being incident on this front-side. The influence of ablation fluence in the nanosecond regime, in combination with the deposition of the aluminum layer of various thicknesses, is investigated by determining the ablation threshold for different glass materials including soda-lime, borosilicate, fused silica and sapphire. Experiments are performed using single laser pulse per shot in an air environment. The best enhancement in terms of threshold fluence reduction is obtained for a 16 nm thick aluminum layer where a reduction of two orders of magnitude in the ablation threshold fluence is observed for all the glass samples investigated in this work.     

热分解制备的RuO2-IrO2电极研究

本文应用XPS和电化学技术研究热分解制备RuO2-IrO2电极的电化学性能和表面性质的关系, 以探讨制备寿命长, 价格低的阳极的可能途径。     

焦磷酸盐水溶液中稳定Pr(IV)和Tb(IV)的研究

本文报道了在焦磷酸盐的碱性水溶液中用O~3氧化Pr(III)和Tb(III),从而得到Pr(IV)-P~2O~7^4^-和Tb(IV)-P~2O~7^4^-的配合物溶液,通过对溶液进行化学分析及吸收光谱的研究,证明了溶液中有Pr(IV)和Tb(IV)的存在,其持征吸收分别为λmax=365nm,摩尔消光系数ε=1205L/mol.cm;/.pr(iv)=257nm,ε=929L/mol.cm.在碱性条件下,Pr(IV)和Tb(IV)的还原反应均为拟一级反应.用动力学方法测定了不同条件下Pr(IV)和Tb(IV)的还原速率常数和半衰期,从而探讨了稳定Pr(IV)和Tb(IV)的条件.同时还测定了在反应条件下Pr(IV)/Pr(III)和Tb(IV)/Tb(III)电对的克式电位。     

生命有机磷化学

简要介绍本实验室近年来在生命有机磷化学方面的研究,包括合成方法、反应机理,生命起源及分子进化和功能分子。     

云团中顺磁性粒子对三重态正电子素寿命的影响

Ferrell很早就提出了正电子素o-Ps的猝灭理论,指出介质中的顺磁性粒子是影响o-Ps寿命的重要因素.Lee等测出O_2猝灭o-Ps的速率常数为10~(10)～10~(11)mol·L~(-1)·s~(-1),得出了顺磁猝灭反应是扩散控制的结论.但前人没有对云团中瞬态活性粒子对o-Ps的影响加以探讨.本文通过o-Ps寿命与氧分压的关系来研究云团中瞬态活性粒子对o-Ps猝灭的影响.     

硅胶表面键合物的正电子湮没谱研究

本文在多孔无定形硅胶的表面上键合了不同极性的化学基团, 制成一系列相同基体, 但表面基团不同的样品, 测定了其正电子湮没寿命谱, 发现寿命谱的最长寿命组份随表面键合基不同, 寿命值有明显差别。寿命值与基团的极性及基团的体积有关, 正电子湮没谱的最长寿命组份能灵敏地表征表面的极性和化学性, 可作为表面化学定性分析的有用技术。     

羰基铁-硫醇-三乙胺反应体系的研究, μ-酰基与μ-烯基铁硫配合物的合成系脱羰反应动力学

本文由反式巴豆酰氯与活性中间物[(μ-CO)(μ-R1S)Fe2(CO)6]ˉEt3N^+反应, 合成了两个新的μ-酰基铁硫配合物(μ-R1S)(μ-CH5CH=CHCO)Fe2(CO)6(R1=Et, Bu^t)和三个新的μ-烯基铁硫配合物(μ-R1S)(μ-CH3CH=CH)Fe2(CO)6(R1=Et, Bu^+, CH2=CHCH2), 此外还研究了μ-酰基配合物脱羰生成μ-烯基配合物的反应动力学, 证明为一级反应, 并求得在一定条件下的速率常数和半衰期。     

Shelf Life and Controlled Cure of Epoxies by Loaded Zeolite

Epoxy formulations based on the multi-functional amine hardener, dicyandiamide (Dicy), regularly contain a free accelerator for reducing the curing temperature and the time needed to complete the network formation. Unfortunately, all accelerators reduce the shelf life of these adhesives at 25°C. In order to solve this problem, accelerator-loaded zeolites fillers were developed, optimised with respect to host–guest interactions and characterised by Fraunhofer IFAM (Bremen, Germany) with regard to the release and curing behaviour in epoxy adhesive formulations. They are added to an epoxy adhesive (diglycidylether of bisphenol A (EP) and dicyandiamide (Dicy), mass ratio 100:6.7), stored at 25°C in regular air or cured (heated with β = 10 K/min to 170°C subsequent isothermal curing for 45 min). That shelf life and curing behaviour are investigated by FT-IR spectroscopy and modulated DSC. Compared to the EP containing free accelerator, the zeolite-filled EP possesses a threefold increase in shelf life at 25°C due to the immobilization of the accelerator in the pores of the zeolites. While the free accelerator acts steadily during heating, it is shown that the loaded zeolite releases the accelerator at about 76°C. Surprisingly, the released accelerator is not only involved in the chemical formation of the epoxy network but it accelerates the dissolution of Dicy considerably. As the result, network formation at 170°C finishes after not more than 19 min and the starting temperature for curing could be reduced to 140°C.