Mass‐Spectrometric Observation of Counter Anion Production in SU‐8 Exposed to UV Light and its Use for Dill C Parameter Determination

Photopolymerization is a phenomenon that is the basis of much of today's microfabrication technology and intense research is conducted to improve its control and the characteristics of end products for a variety of applications. The design of microscopic structures often relies on the accurate knowledge and modeling of photopolymer's behavior upon exposure, i.e. the Dill parameters, for each radiation species of interest and therefore the development of flexible characterization techniques is of great importance. SU‐8 is a popular compound that is representative of a whole class that relies on cationic polymerization, where an acid is obtained via photolysis of an onium salt during exposure. Here we report on the observation of SbF₆^? via laser desorption mass spectrometry on SU‐8 exposed to UV light at the wavelength of 365 nm and demonstrate that the yield of this counter‐anion as a function of exposure is consistent with the Dill C parameter value available in the literature. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 967–972     

LDI学生成绩评价方法的构建——以精细化学品化学课程为例

根据我院化工专业精细化学品化学课程改革的实际，围绕以评促学、以评助教，构建了LDI学生课程成绩评价方法。该方法以教师和学生为评价主体，从3个环节（理论学习、课内实验、创新实践）、4个维度（课前自学、课堂学习、课内实验与创新实践、期末考试）入手，将评价内容分为多个项目来引导学生学习、实践，并全面考核学生的知识与能力。该法不仅能提高学生学习的主动性，还能潜移默化地培养学生的创新意识和团队精神。     

Investigation of Cycloparaphenylenes (CPPs) and their Noncovalent Ring-in-Ring and Fullerene-in-Ring Complexes by (Matrix-Assisted) Laser Desorption/Ionization and Density Functional Theory

[n]Cycloparaphenylenes ([n]CPPs) with n=5, 8, 10 and 12 and their noncovalent ring-in-ring and [m]fullerene-in-ring complexes with m=60, 70 and 84 have been studied by direct and matrix-assisted laser desorption ionization ((MA)LDI) and density-functional theory (DFT). LDI is introduced as a straightforward approach for the sensitive analysis of CPPs, free from unwanted decomposition and without the need of a matrix. The ring-in-ring system of [[10]CPP⊃[5]CPP]^+. was studied in positive-ion MALDI. Fragmentation and DFT indicate that the positive charge is exclusively located on the inner ring, while in [[10]CPP⊃C₆₀]^+. it is located solely on the outer nanohoop. Positive-ion MALDI is introduced as a new sensitive method for analysis of CPP⊃fullerene complexes, enabling the detection of novel complexes [[12]CPP⊃C_{60, 70 and 84}]^+. and [[10]CPP⊃C₈₄]^+.. Selective binding can be observed when mixing one fullerene with two CPPs or vice versa, reflecting ideal size requirements for efficient complex formation. Geometries, binding and fragmentation energies of CPP⊃fullerene complexes from DFT calculations explain the observed fragmentation behavior.     

Detection and imaging of chrome yellow (lead chromate) in latent prints,solid residues,and minerals by laser‐desorption/ionization mass spectrometry (LDI‐MS)

In the past, chrome yellow (lead chromate, PbCrO₄), a bright orange‐red substance, has been widely used as an inorganic pigment in the production of paints, coatings, and plastics. Herein, we demonstrate that laser desorption/ionization mass spectrometry (LDI‐MS) is a powerful tool for the detection of lead chromate in solid residues. In fact, lead chromate in trace amounts is easily detectable by LDI‐MS even from residues left as latent prints. For example, a latent print obtained by stamping the exposed laterally cut surface of a pencil over 50 years old on an acetonitrile‐moistened paper, was successfully imaged for both lead and chromate using a Synapt G2 HDMS mass spectrometer. After rastering the print with a 355 nm laser beam and recording positive‐ and negative‐ion mass spectra over the range m/z 50–1200, we generated false‐color ‘heat maps’ (single‐ion images) for ²⁰⁸Pb^+• (m/z 207.98) and Cr₂O₆^−• (m/z 199.85). The heat maps matched closely with the faint visual image of the pencil imprint. Moreover, our results confirmed that lead chromate was used in the pigment coatings of old pencils. Evidently, LDI‐MS imaging is an efficient procedure to survey for the presence of lead and chromate in minerals and other materials. Copyright © 2017 John Wiley & Sons, Ltd.     

Use of a porous silicon–gold plasmonic nanostructure to enhance serum peptide signals in MALDI-TOF analysis

Small peptides in serum are potential biomarkers for the diagnosis of cancer and other diseases. The identification of peptide biomarkers in human plasma/serum has become an area of high interest in medical research. However, the direct analysis of peptides in serum samples using mass spectrometry is challenging due to the low concentration of peptides and the high abundance of high-molecular-weight proteins in serum, the latter of which causes severe signal suppression. Herein, we reported that porous semiconductor-noble metal hybrid nanostructures can both eliminate the interference from large proteins in serum samples and significantly enhance the matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) yields of peptides captured on the nanostructure. Serum peptide fingerprints with high fidelity can be acquired rapidly, and successful discrimination of colorectal cancer patients based on peptide fingerprints is demonstrated.     

Fabrication of nanostructured silicon by metal-assisted etching and its effects on matrix-free laser desorption/ionization mass spectrometry

A matrix-free, high sensitivity, nanostructured silicon surface assisted laser desorption/ionization mass spectrometry (LDI-MS) method fabricated by metal-assisted etching was investigated. Effects of key process parameters, such as etching time, substrate resistance and etchant composition, on the nanostructured silicon formation and its LDI-MS efficiency were studied. The results show that the nanostructured silicon pore depth and size increase with etching time, while MS ion intensity increases with etching time to 300 s then decreases until 600 s for both low resistance (0.001–0.02 Ω cm) and high resistance (1–100 Ω cm) silicon substrates. The nanostructured silicon surface morphologies were found to directly affect the LDI-MS signal ion intensity. By characterizing the nanostructured silicon surface roughness using atomic force microscopy (AFM) and sample absorption efficiency using fluorescence microscopy, it was further demonstrated that the nanostructured silicon surface roughness was highly correlated to the LDI-MS performance.     

Evaluation of a new matrix-free laser desorption/ionization method through statistic studies: comparison of the DIAMS (desorption/ionization on self-assembled monolayer surface) method with the MALDI and TGFA-LDI techniques

This work demonstrates that the desorption/ionization on self-assembled monolayer surface (DIAMS) mass spectrometry, a recent matrix-free laser desorption/ionization (LDI) method based on an organic target plate, is as statistically repeatable and reproducible as matrix assisted laser desorption ionization (MALDI) and thin gold film-assisted laser desorption/ionization (TGFA-LDI) mass spectrometries. On lipophilic DIAMS of target plates with a mixture of glycerides, repeatability/reproducibility has been estimated at 15 and 30% and the relative detection limit has been evaluated at 0.3 and 3 pmol, with and without NaI respectively. Salicylic acid and its d(6)-isomer analysis confirm the applicability of the DIAMS method in the detection of compounds of low molecular weight.     

A laser desorption ionization time-of-flight mass spectrometry investigation into triacylglycerols oxidation during thermal stressing of edible oils

Laser desorption ionization time-of-flight mass spectrometry (LDI–TOF MS) was used to characterize olive and sunflower oils before and after thermally assisted oxidation in order to develop a rapid fingerprinting method for oil that contains unchanged and oxidized components. No matrix was used to assist laser desorption, and simplified mass spectra were obtained in the mass range of interest (m/z 500–1000), where triacyl- and diacylglycerol ions were observed. Sample preparation was reduced to dissolving oil in chloroform saturated with NaCl. Sodiated triacylglycerols (TAGs), their epoxy/hydroxy and hydroperoxy derivatives, as well as TAGs with shortened chain fatty acids (β-scission products) were clearly observed in the spectra. LDI–TOF MS rapidly provides semiquantitative information about the oxidation level of edible oil, and thus represents a very useful quality control tool. Dedicated to Professor Pier Giorgio Zambonin on the occasion of his 72nd birthday.     

Direct laser desorption/ionization time-of-flight mass spectrometry of conjugated polymers

Two conjugated polymers (CPs), poly(9,9-dioctylfluorene) (PF) and poly(3-octylthiophene) (PT) were analyzed by direct laser desorption/ionization time-of-flight mass spectrometry (LDI-ToF MS). Because of their strong absorption near the wavelength of the laser (337 nm), easy and transient energy transfer properties and sufficient thermal stability, CPs can be desorbed and ionized directly without a matrix. For comparison, these two polymers were also analyzed using matrix-assisted laser desorption/ionization (MALDI)-ToF MS in the positive reflectron mode. The results revealed that they are very similar in terms of quality and resolution. All results demonstrate that LDI-ToF MS is an alternative method for the mass characterization of some conjugated systems, thereby simplifying the process of sample preparation and result analysis.     

Silver‐109‐based laser desorption/ionization mass spectrometry method for detection and quantification of amino acids

A new methodology applicable for both high‐resolution laser desorption/ionization mass spectrometry and mass spectrometry imaging of amino acids is presented. The matrix‐assisted laser desorption ionization‐type target containing monoisotopic cationic ¹⁰⁹Ag nanoparticles (¹⁰⁹AgNPs) was used for rapid mass spectrometry measurements of 11 amino acids of different chemical properties. Amino acids were directly tested in 100,000‐fold concentration change conditions ranging from 100 μg/mL to 1 ng/mL which equates to 50 ng to 500 fg of amino acid per measurement spot. Limit of detection values obtained suggest that presented method/target system is among the fastest and most sensitive ones in laser mass spectrometry. Mass spectrometry imaging of spots of human blood plasma spiked with amino acids showed their surface distribution allowing optimization of quantitative measurements.