一种区间数的因子分析技术及其在证券市场中的应用

传统的因子分析技术能够有效地对高维变量空间进行降维处理,但它对于样本空间却缺乏行之有效的降维效果.为了解决这一问题,一种针对大量样本数据、新的因子分析技术———区间数因子分析技术(intervaldatafactoranalysis,IFA)被提出并得到了迅速的发展。IFA方法对传统的数据概念做了本质性的扩张,运用'数据打包'的理念,对海量原始数据在不破坏其原有内在逻辑关系的前提下,可以进行变量和样本点维度的双重降维。本文详细阐述了区间数因子分析技术的原理,并以中国股票市场为案例研究背景,结果表明IFA分析技术对大规模多维数据系统做综合简化是十分有效的。     

Determination of contact stresses in problems on bending of a package of transversely isotropic bars

A mechanomathematical model for bending of packages of transversely isotropic bars of rectangular cross section is proposed. Adhesion, slippage, and separation zones between the bars are considered. The resolving equations for deflections and tangential displacements are supplemented with a system of linear differential equations for determining the normal and tangential contact stresses, and boundary conditions are formulated. A scheme for analytical solution of two contact problems—a package under the action of a distributed load and a round stamp—is considered. For these packages, a transition is performed from the initial system of differential equations for determining the contact stresses, where the unknown functions are interrelated by recurrent relationships, to one linear differential equation of fourth order and then to a system of linear algebraic equations. This transition allows us to integrate the initial system and get expressions for the contact stresses.Translated from Mekhanika Kompozitnykh Materialov, Vol. 40, No. 6, pp. 761–778, November–December, 2004.     

Fermentation characteristics and the dynamic trend of chemical components during fermentation of Massa Medicata Fermentata

As a representative of traditionally fermented Chinese medicine, Massa Medicata Fermentata (MMF) shows the functions of invigorating the spleen and stomach and promoting digestion, which plays an important role in the treatment of gastrointestinal diseases. The fermentation mechanism and the key factors that affect the quality of MMF have not been revealed yet, which has become an urgent issue that limits its clinical application. This article aims to systematically and comprehensively reveal the transformation of physical properties and the dynamic trend of chemical components including substrate components, volatile components, and lactic acid as anaerobic fermentation product during MMF fermentation. Along with obvious hyphae growth observed for MMF, the weight of MMF decreased, and the moisture and temperature increased. Through the quantified 14 components from substrate, ferulic acid increased from 45.53 ± 6.94 to 141.89 ± 78.40 μg/g, while glycosides and phenolic acids declined except caffeic acid. Also, within the 66 volatile components analyzed, alcohols and acids increased, while aldehydes and ketones decreased. Lactic acid was not detected in the fermentation substrate, but an apparent increase in lactic acid content was observed along with the increased fermentation days, resulting in 2.54 ± 0.15 mg/g on day 8. Based on the tested components, the fermentation process of MMF was discriminated into three distinct stages by principal component analysis, and an optimal fermentation time of four days was proposed. The results of this study will be of great significance to clarify the characteristics of fermentation and conduce to improving quality standards of MMF.     

一般工商业零售电价套餐适应性评估与优化方法

在电力体制改革的大背景下,合理评估零售电价套餐适应性,对控制电网经营风险和推进售电侧改革有重要意义。针对我国电力市场以及一般工商业的特点,首先从竞争、用户以及市场环境角度出发建立了一般工商业零售电价套餐评估指标体系;其次将层次分析法和改进的灰色白化权函数相结合,对电价套餐进行适应性评估;最后针对该评估方法建立了基于蚁群算法的优化模型,以最小成本得到提高电价套餐适应性等级的优化方案,并验证了该方法具有良好的鲁棒性,具有一定的参考意义。     

基于数值原子轨道基组的第一性原理计算软件ABACUS

随着超级计算机硬件和数值算法迅速发展, 使得目前利用密度泛函理论研究上千个原子体系的电子能带和结构等性质变得可行. 数值原子轨道基组由于其基组较小和局域等特性, 可以很好地与电子结构计算中的线性标度算法等的新算法结合, 用来研究较大尺寸的物理体系. 本文详细介绍了一款中国科学技术大学量子信息重点 实验室自主开发的基于数值原子轨道基组的第一性原理计算软件 Atomic-orbital Based Ab-initio Computation at UStc. 大量的测试结果表明: 该软件具有很好的准确性和较高的并行效率, 可以用于包含1000个原子左右的系统的电子结构和原子结构的研究以及分子动力学模拟计算.     

Flexible Liquid Crystal Polymer Technologies from Microwave to Terahertz Frequencies

With the emergence of fifth-generation (5G) cellular networks, millimeter-wave (mmW) and terahertz (THz) frequencies have attracted ever-growing interest for advanced wireless applications. The traditional printed circuit board materials have become uncompetitive at such high frequencies due to their high dielectric loss and large water absorption rates. As a promising high-frequency alternative, liquid crystal polymers (LCPs) have been widely investigated for use in circuit devices, chip integration, and module packaging over the last decade due to their low loss tangent up to 1.8 THz and good hermeticity. The previous review articles have summarized the chemical properties of LCP films, flexible LCP antennas, and LCP-based antenna-in-package and system-in-package technologies for 5G applications, although these articles did not discuss synthetic LCP technologies. In addition to wireless applications, the attractive mechanical, chemical, and thermal properties of LCP films enable interesting applications in micro-electro-mechanical systems (MEMS), biomedical electronics, and microfluidics, which have not been summarized to date. Here, a comprehensive review of flexible LCP technologies covering electric circuits, antennas, integration and packaging technologies, front-end modules, MEMS, biomedical devices, and microfluidics from microwave to THz frequencies is presented for the first time, which gives a broad introduction for those outside or just entering the field and provides perspective and breadth for those who are well established in the field.     

QSAR models of cytochrome P450 enzyme 1A2 inhibitors using CoMFA,CoMSIA and HQSAR

Quantitative structure–activity relationship (QSAR) studies were conducted on an in-house database of cytochrome P450 enzyme 1A2 inhibitors using the comparative molecular field analysis (CoMFA), comparative molecular similarity analysis (CoMSIA) and hologram QSAR (HQSAR) approaches. The database consisted of 36 active molecules featuring varied core structures. The model based on the naphthalene substructure alignment incorporating 19 molecules yielded the best model with a CoMFA cross validation value q² of 0.667 and a Pearson correlation coefficient r² of 0.976; a CoMSIA q² value of 0.616 and r² value of 0.985; and a HQSAR q² value of 0.652 and r² value of 0.917. A second model incorporating 34 molecules aligned using the benzene substructure yielded an acceptable CoMFA model with q² value of 0.5 and r² value of 0.991. Depending on the core structure of the molecule under consideration, new CYP1A2 inhibitors will be designed based on the results from these models.     

An Improved Plotting Package Applied to Chemical Graphing Problems

Abstract

A plotting package, written in LINC assembly language, is described. It produces high quality graphs and labels the graphs for direct submission to professional journals. A μ-LINC (Laboratory INstrument (Computer) is used to compute least-squares fitted curves and lines from data entered either on-or off-line and to draw the graphs directly on an incremental plotter. Bar graphs, line graphs, and fitted data can be plotted with options to suppress the lines and/or the points.     

电子封装、QFP和MCM热变形的实验及数值分析

0Introduction Anelectronicpackageisgenerallyconstructedwithanactivesiliconchip,mountisland,gold wires,leadframesandsoldersasshowninFig.1(a).Toprotectfromtheenvironment,thesilicon chipisusuallyencapsulatedinresin.SincethesematerialshavedifferentCTE(coeffic…     

耐高压光纤Bragg光栅压力传感技术研究

分析了聚合物封装光纤光栅的压力响应特性,通过采用特殊聚合物材料将光纤光栅封装于金属套管中,并通过在金属套管预涂覆一层软弹性材料,以消除封装过程中由于聚合物固化收缩以及聚合物与套管壁粘接与摩擦产生的光纤光栅啁啾化,改善了光纤光栅压力响应特性.封装后的光纤光栅压力响应灵敏度为0.036 nm/MP,具有良好的线性,压力测量范围可达40 MP以上.