A microprocessor based autoscanner for electromigration studies in thin films

Mass transport due to electromigration can be estimated if the diffusion coefficientD and the electromigration effective charge numberZ* are known. Neutron activated tracer scanning method determine the radioactivity at different positions. An automatic scanning system for determining the radioactive concentration profiles developed using a microprocessor is described in this paper. Using the radioactive concentration profiles the electromigration shift is determined. From this shift the electromigration effective charge numberZ* is calculated. The system developed was tested for tin thin films.     

Advances in constant-velocity Mössbauer instrumentation

A prototype of a programmable constant-velocity scaler is presented. This instrument allows the acquisition of partial Mössbauer spectra in selected energy regions using standard drivers and transducers. It can be fully operated by a remote application, thus data acquisition can be automated. The instrument consists of a programmable counter and a constant-velocity reference. The reference waveform generator is amplitude modulated with 13-bit resolution, and is programmable in a wide range of frequencies and waveforms in order to optimize the performance of the transducer. The counter is compatible with most standard SCA, and is configured as a rate-meter that provides counts per selectable time slice at the programmed velocity. As a demonstration of the instrument applications, a partial Mössbauer spectrum of a natural iron foil was taken. Only positive energies were studied in 512 channels, accumulating 20 s per channel. A line width of 0.20 mm/s was achieved, performing with an efficiency of 80%.     

高效液相色谱-电感耦合等离子体发射光谱联用的瞬时信号采集和处理软件及实际应用

本文对高效液相色谱-电感耦合等离子体原子发射光谱联用技术进行了研究.对所用ICAP-9000型等离子体原子发射光谱仪的控制采样程序进行了部分修改,采集的数据通过异步串行通讯方式由AppleⅡ微机传送至IBM PC286机进行处理。发展的瞬时信号采集程序能满足HPLC的检测要求,并将这一联用技术成功的用于砷的形态分析.     

Cadmium speciation in Arabidopsis thaliana as a strategy to study metal accumulation system in plants

The strategy to identify cadmium deactivation mechanism in Arabidopsis thaliana has been developed using selective and sensitive hyphenated techniques. Cadmium concentrations, in main parts of the plant, were determined by ICP-MS and total amount was found as 0.43-0.44 μg g⁻¹ in leaves and 3.3-3.4 μg g⁻¹ in roots. Speciation of the metal complexes in cells was investigated by SEC-ICP-MS in order to estimate the accumulation process. Phytochelatins, desglycyl-phytochelatins and phytochelatins homologues lacking the N-terminal γ-linked glutamic acid were extracted from plant and were identified by RPLC-ESI-MS. Two-dimensional chromatography allowed to link the metal complexes separated by SEC with isoforms of phytochelatins analyzed by high resolution RPLC and confirm their significant responsibility for metal accumulation. The potential of the cadmium complexes speciation indicates that obtained results could be reliable source of knowledge to confirm the information coming from the well-known genomic sequence of Arabidopsis and to estimate the role of γ-glutamyl transpeptidase in metabolism of glutathione.     

Capillary electrophoresis coupled to time of flight-mass spectrometry of therapeutic peptide hormones

We have established a method for separation and characterization of a series of peptide hormones of pharmaceutical interest and wide therapeutical use by capillary electrophoresis-electrospray-mass spectrometry (CE-ES-MS) using a sheath flow interface. Several parameters were systematically investigated, such as concentration of the electrolyte, organic solvent and sheath liquid composition, gas flow rates and capillary position. Moreover, limits of detection, linearity, repeatability and day-to-day reproducibility of the proposed method were studied in order to obtain the main quality parameters.     

Hydrophobic interaction chromatography coupled with atomic fluorescence spectrometric detection Effect of the denaturation on the determination of thiolic proteins

Hydrophobic interaction chromatography coupled online with chemical vapour atomic fluorescence spectrometry (HIC-CVGAFS) has been optimized for the analysis of thiolic proteins in denaturing conditions. Proteins are pre-column simultaneously denatured and derivatized in phosphate buffer solution containing 8.0 mol dm⁻³ urea and p-hydroxymercurybenzoate (PHMB) and the derivatized denatured proteins are separated on a silica HIC Eichrom Propyl column in the presence of 8.0 M urea in the mobile phase. Post-column online reaction of derivatized denatured proteins with bromine, generated in situ by KBr/KBrO₃ in HCl medium, allowed the fast conversion of the uncomplexed PHMB and of the PHMB bound to proteins to inorganic mercury also in presence of urea. Hg²⁺, present in solution as Hg²⁺-urea complex, is selectively detected by AFS in a Ar/H₂ miniaturized flame after sodium borohydride reduction to Hg. Under optimized conditions, online bromine treatment gives a 100±2% recovery of both free and protein-complexed PHMB. Denatured glyceraldehyde-3-phosphate dehydrogenase, aldolase, lactate dehydrogenase, trioso phosphate isomerase and β-lactoglobulin have been examined. As the sensitivity and limit of detection of proteins in the HIC-CVGAFS apparatus depends on number of SH groups reacting with PHMB, the denaturation process, which increases the number of PHMB-reactive thiolic groups in proteins, improves the analytical performances of the described system in protein analysis. The detection limit for the denatured proteins examined was found in the range of 10⁻¹⁰-10⁻¹² mol dm⁻³, depending on the considered protein, with linear calibration curves spanning over four decades of concentration.     

Determination of trace elements in seawater samples by on-line column extraction/graphite furnace atomic absorption spectrometry

An innovative procedure for the on-line coupling of ion chromatography with graphite furnace atomic absorption spectrometry is described, which is particularly effective for the determination of trace metals in seawater samples. The Capillary Injection Device (CID) is used as an interface which allows the eluent to be transferred from the chromatographic column into the graphite tube at a flow rate of as high as 2 ml/min. The analytical procedure is based on the metal complex formation with 8-hydroxyquinoline in the sample solution, followed by the preconcentration of the complexes in a chromatographic column packed with XAD-2 resin. The complexes were then eluted from the column with methanol, and quantitatively injected into the furnace. The procedure was validated by determining cadmium and lead in certified reference seawater samples at a level of 30–40 pg/g, with a typical reproducibility of 10% and an accuracy of better than 5%. Finally, it was tested on a real sample of seawater. Due to the high reproducibility, a pg/g concentration level can be measured.     

Splitless on-line coupling of capillary high-performance liquid chromatography,capillary electrochromatography and pressurized capillary electrochromatography with nuclear magnetic resonance spectroscopy

A mixture of unsaturated fatty acid methyl esters was separated with a new splitless capillary set-up. With the employed apparatus configuration different capillary separation techniques such as capillary high-performance liquid chromatography (cHPLC), capillary electrochromatography (CEC) and pressurized capillary electrochromatography (pCEC) could be applied. The detection and identification of the sample compounds were accomplished by hyphenating these capillary separation techniques with nuclear magnetic resonance (NMR) spectroscopy using a novel configuration of the detection capillary set-up. Using modified electrokinetically driven separation techniques, the electric field was applied solely across the separation column. With this improved interface for capillary liquid chromatography-NMR on-line coupling, the stereochemical assignment of the cis and trans configuration of unsaturated fatty acids could be easily accomplished. Finally, the results of cHPLC-NMR, CEC-NMR and pCEC-NMR coupling experiments were compared.Dedicated to Professor Günter Häfelinger on the occasion of his 65th birthday     

Sol-gel approach to in situ creation of high pH-resistant surface-bonded organic-inorganic hybrid zirconia coating for capillary microextraction (in-tube SPME)

A novel zirconia-based hybrid organic-inorganic sol-gel coating was developed for capillary microextraction (CME) (in-tube SPME). High degree of chemical inertness inherent in zirconia makes it very difficult to covalently bind a suitable organic ligand to its surface. In the present work, this problem was addressed from a sol-gel chemistry point of view. Principles of sol-gel chemistry were employed to chemically bind a hydroxy-terminated silicone polymer (polydimethyldiphenylsiloxane, PDMDPS) to a sol-gel zirconia network in the course of its evolution from a highly reactive alkoxide precursor undergoing controlled hydrolytic polycondensation reactions. A fused silica capillary was filled with a properly designed sol solution to allow for the sol-gel reactions to take place within the capillary for a predetermined period of time (typically 15-30 min). In the course of this process, a layer of the evolving hybrid organic-inorganic sol-gel polymer got chemically anchored to the silanol groups on the capillary inner walls via condensation reaction. At the end of this in-capillary residence time, the unbonded part of the sol solution was expelled from the capillary under helium pressure, leaving behind a chemically bonded sol-gel zirconia-PDMDPS coating on the inner walls. Polycyclic aromatic hydrocarbons, ketones, and aldehydes were efficiently extracted and preconcentrated from dilute aqueous samples using sol-gel zirconia-PDMDPS coated capillaries followed by thermal desorption and GC analysis of the extracted solutes. The newly developed sol-gel hybrid zirconia coatings demonstrated excellent pH stability, and retained the extraction characteristics intact even after continuous rinsing with a 0.1 M NaOH solution for 24 h. To our knowledge, this is the first report on the use of a sol-gel zirconia-based hybrid organic-inorganic coating as an extraction medium in solid phase microextraction (SPME).     

Identification of anthraquinone coloring matters in natural red dyestuffs by high performance liquid chromatography with ultraviolet and electrospray mass spectrometric detection

Reversed phase liquid chromatography with diode array detection (DAD) and electrospray mass spectrometric (ESI MSD) methods were developed for the identification of anthraquinone color components of cochineal, lac dye, and madder – red natural dyestuffs. Electrospray mass spectrometry was found to be more suitable than diode array detection for such analysis because of its higher sensitivity (detection limits in the range 30–90 ng mL^–1) and selectivity. The developed method permitted unequivocal identification of carminic acid and laccaic acid A as coloring matters in examined preparations of cochineal and lac dye, respectively. In madder more chemical color species were found: alizarin, purpurin, lucidin, ruberythric acid, and also aluminum and calcium alizarin lake. Among the methods recommended so far, the present one allows fast, direct, and unequivocal identification of components of very complicated natural products used in art.