Dielectric properties of a hydrated sulfonated poly(styrene-ethylene/butylenes-styrene) triblock copolymer

The present study showed that sulfonated poly(styrene-ethylene/butylenes-styrene) (S-SEBS) triblock copolymer ionomers can be made to exhibit dielectric constants on the order of a hundreds thousand. Although they are too lossy at this point to use as dielectric materials in capacitors or as electrostrictive Maxwell effect transducer materials because of their high hydrogen ion conductivity, the results of these initial dielectric studies as a function of ion content were used to try to understand the effects of a polar plasticizer, water, on dielectric properties of the acid form of this ionomer. This was done before moving on to more tightly bound ions (rather than the hydrogen ions of the sulfonic acid groups used here) and to other polar, less mobile plasticizers (which also interact strongly with the ionic dipoles). The discovery of such high dielectric constants suggested the possibility that low dielectric loss versions of this type of polymer, as well as other members of the class known as ionomers, might find future applications as extremely high dielectric constant materials in capacitors or transducers. Experimental results for films with degrees of sulfonation on the order of 10% or more showed dielectric constants on the order of ?′ ∼ 100,000 but dielectric loss tangents near D = tan δ ∼ 0.3, when the materials were exposed to high humidity conditions. Experiments to determine the effects of water content on the material's dielectric response showed that water can easily move into and out of the films studied and that this transport behavior is strongly correlated to the relative humidity of the environment and to the degree of sulfonation. Water content, in this case, was thus the primary consideration when attempting to understand the observed high dielectric constants in films with degree of sulfonation greater than 5.5%. However, vacuum-dried films were, also, examined and observed to exhibit a dielectric constant on the order of 2 until the degree of sulfonation was greater than 11%. Above this value, the dielectric constant increased by approximately 100% to a value on the order of 4.     

酸性膦酸酯碱皂微乳体系的红外光谱研究

近年来对溶剂革取过程中有机相形成微乳状液的研究正引起人们的重视同，我们曾用付里叶变换红外光谱法研究过钢皂及钾皂2一乙基已基股酸单·2一乙基已基酯（简写为NaA及KA下同）加水形成微乳状液的过程，观察到P二0，P－0－C，P－0－HH－0－H和0－H等基团吸收谱带频率或强度的变化［‘剑．本文进一步对＃、销和钾三种碱金属皂化2一乙基已基胁酸单一2一乙基已基酯有机相微乳状液的形成及其红外光谱作深入研究．1实验部分五．1样品的制备问将金属捏、销和钾各置于2一乙基巴基磷酸单一2一乙基已基酯（以HA表示，下同）一正庚烷中加热回流…     

Solubility and Ionic Processes in the Cu X 2? MX ?H2O ( X ?=Cl?, Br?; M +=Li+, Na+, K+, NH4+, Cs+) Systems

Summary.  Solubility isotherms in the CuBr₂−MBr−H₂O (M ⁺ = Li⁺, Na⁺, Cs⁺) systems at 298.15 K were measured. The results together with other available literature data for copper chloride and bromide systems were treated by hydration analysis, and comparative discussion of ionic processes taking place in the respective saturated solutions was performed. Corresponding author. E-mail: jitka@prfdec.natur.cuni.cz Received August 6, 2002; accepted (revised) November 29, 2002 Published online April 3, 2003     

In situ neutron powder diffraction investigation of the hydration of tricalcium aluminate in the presence of gypsum

The hydration of a 1:3 molar ratio of tricalcium aluminate, Ca₃Al₂O₆, to gypsum, CaSO₄·2D₂O, was investigated at temperatures of 25, 50, and 80 °C using time-of-flight powder neutron diffraction combined with multiphase Rietveld structural refinement. It was shown that ettringite, Ca₆[Al(OD)₆]₂(SO₄)₃·∼26D₂O, was the first and only hydration product of the system, in contrast to a prior investigation which suggested the occurrence of a precursor phase prior to the formation of ettringite. Kinetics data showed that the hydration reaction is very sensitive to temperature: hydration at 25 °C was characterized by a single kinetic regime while hydration at higher temperatures consisted of two distinct kinetic regimes. The presence of two kinetic regimes was attributed to a change in either the dimensionality of the growth process or a change in the rate controlling mechanism in the hydration reaction.     

Structure and hydration of polycytidylic acid from the data of infrared spectroscopy, EHF dielectrometry and computer modeling

The aim of this paper is to summarize the original results concerned with the elucidation of the role of water environment in the formation of different structures of polyribocytidylic acid (poly(rC)), depending on the pH, temperature and ion content. To solve this problem, we studied the hydration of poly(rC)-K⁺ in films differing in water content, by methods of infrared spectroscopy and piezogravimetry, and in solution, using the dielectric measurements at a wavelength of 7.6 mm (extremely high frequencies — EHF). The experimental results were confirmed by a Monte Carlo simulation of the interaction between water molecules and single-strand and double-strand poly(rC) fragments in clusters of 800 water molecules. A model of hydration of double-strand complex of poly(rC)⁺-poly(rC) has been proposed based on our results and the known X-ray parameters of the complex. The obtained results and proposed structure of poly(rC)⁺-poly(rC) suggest that, the stabilization of this complex occurs due to intra- and inter-chain water bridges, together with the hydrogen bonds between neutral and protonated cytosines in pairs.     

Non empirical quantum mechanical calculations of the1H,13C,15N and17O magnetic shielding constants and of the spin-spin coupling constants in formamide,hydrated formamide and N-methylformamide

The magnetic shielding constants of the different atoms of formamide, hydrated formamide and N-methylformamide are calculated by anab initio method. For the protons of formamide the measured differences between their chemical shifts are correctly reproduced by theory, provided that the molecular geometry used as input is carefully chosen. The differences between the values of the magnetic shielding constants calculated for formamide and hydrated formamide show that intermolecular hydrogen bonding produces variations of chemical shifts for all the atoms of the molecule except the formyl proton. The calculated chemical shift variations between formamide and N-methylformamide are compared to the experimental values and discussed in relation with different hydrogen bonding possibilities of the two molecules. The calculation of the contact term of the spin-spin coupling constants of formamide and hydrated formamide shows that in most cases the measured trends are satisfactorily reproduced and that the variations of these terms upon hydration are less than 3%.     

Evaluation of the contribution to hydration of nonelectrolytes from the hydrophobic effect

A new method was suggested for estimating the hydrophobic effect of contributions to the Gibbs energies and enthalpies of hydration of hydrocarbons, inorganic gases and rare gases. In accordance with this method the hydrophobic effect contribution to the Gibbs energy was evaluated from the difference between the hydration Gibbs energy of a solute and the non hydrophobic contribution. To estimate the latter value, the known dependence connecting the Gibbs energies of solvation of a solute in a number of aprotic solvents to the Hildebrand solubility parameter for these solvents was used. The non hydrophobic contribution to the Gibbs energy of hydration was calculated for various solutes from such dependences extended to water as solvent. The Hildebrand solubility parameter for water used in the calculation was corrected for the effect of association through hydrogen bonding. This correction was made by subtraction of the water self-association enthalpy from the enthalpy of vaporization of water. The evaluated Gibbs energies of the hydrophobic effect are positive for saturated hydrocarbons, inorganic gases and rare gases and linearly depend on the solute molecular refraction. The hydrophobic contribution to the hydration enthalpies of the solutes was calculated in the same manner as was made to calculate the hydrophobic contribution to Gibbs energies of hydration. Enthalpies of the hydrophobic effect for the solutes under study are negative.     

Interactions of Some Amino Acids with Aqueous N,N-Dimethylacetamide Solutions at 298.15 and 308.15 K: A Volumetric Approach

The apparent molar volumes, V _φ , of glycine, L-alanine and L-serine were obtained in aqueous 0 to ∼4 mol⋅kg⁻¹ N,N-dimethylacetamide (DMA) solutions from density measurements at 298.15 and 308.15 K. The standard partial molar volume, V _φ ^o, and standard partial molar volumes of transfer, Δ_tr V _φ ^o, were determined for these amino acids. It has been shown that hydrophilic-hydrophilic interactions between charged groups of the amino acids and the —CON= group of DMA are predominant in the case of glycine and L-serine, but for L-alanine the interactions between its side group (—CH₃) and DMA are predominant. An increase in temperature increases the standard partial molar volumes but decreases the transfer volumes of the amino acids. The results have been interpreted in terms of cosphere overlap model.     

Spectroscopic Investigation on the Acrolein Hydration

The progress with time of the UV and ¹H NMR spectra of an aqueous solution of acrolein shows that, contrary to assumptions of previous authors, hydracrylaldehyde is not the only reaction product: in addition to it and its hydrated form, spontaneous oxidation products are present.     

Physicochemical Characterization of Hydrated 4-Sulphonato-Calix[n]arenes: Thermal,Structural, and Sorption Properties

In this study, the thermal behavior of three hydrated water-soluble 4-sulphonato calix[n]arenes was investigated. The melting points, heats of fusion, and heats of solution of the calix[4]arene, calix[6]arene and calix[8]arene were 277, 262, and 270°C; 192, 242 and 351 kJ/mol; and 30, 58 and 63 kJ/mol, respectively. Lower heat of fusion, smaller increase in entropy and smaller heat of solution of the calix[4]arene compared to the calix[6]arene and calix[8]arene showed that less heat was required to break up the crystal lattice of the smaller macromolecule. This apparent anomaly is rationalized in terms of smaller cooperativity of interaction between the molecules of calix[4]arene in the crystal lattice, although the strength of the individual interactions is stronger as evidenced by the higher melting point. TGA analysis indicated that about 17–20% of water was associated with the calix[n]arenes. Both TGA and hot stage microscopy results indicated that upon heating these molecules underwent stepwise water loss. TGA kinetics showed that the 4-sulphonato-calix[8]arene lost water easier than the other two calixarenes. The moisture adsorption behavior of all calixarenes followed type II isotherms. For the same amount of material, the calix[6]arene adsorbed more moisture than the calix[4]arene and the calix[8]arene. Moreover, dehydrated less crystalline 4-sulphonic-calix[n]arenes powders are hydroscopic.