A Novel Biomass Supported Na2CO3 System for Flue Gas Desulfurization

The breakthrough and stoichiometric SO2 adsorption efficiencies of a biomass supported Na2CO3 system (80 wt %Na2CO3/straw) have reached 48.9% and 80.6% respectively at a desulfurization temperature of 80℃.     

Structure of solid monolayers and multilayers of n -hexane on graphite

We present all-atom molecular dynamics simulations ofn-hexane on the basal plane of graphite at monolayer and multilayer coverages. In keeping with experimental data, we find the presence of ordered adsorbed layers both at single monolayer coverage and when the adsorbed layer coexists with excess liquid adsorbate. Using a simulation method that does not impose any particular periodicity on the adsorbed layer, we quantitatively compare our results to the results of neutron diffraction experiments and find a structural transition from a uniaxially incommensurate lattice to a fully commensurate structure on increasing the coverage from a monolayer to a multilayer. The zig-zag backbone planes of all the alkane molecules lie parallel to the graphite surface at the multilayer coverage, while a few molecules are observed to attain the perpendicular orientation at monolayer coverage. Dedicated to Professor C N R Rao on his 70th birthday     

Pseudo-Isotherms Using a Second Order Kinetic Expression Constant

The kinetics of four sorption systems, Cu/tree fern, Pb/tree fern, AB9/activated clay and BR18/activated clay have been studied based on the assumption of a pseudo-second order rate law. Pseudo-isotherms using the pseudo-second order kinetic expression constant have been developed to describe the four liquid-solid sorption systems. The experimental results have been analyzed using a pseudo-Langmuir and a pseudo-Redlich-Peterson isotherm. Both isotherms were found to represent the measured sorption data well. According to the evaluation using the pseudo-Langmuir equation, the monolayer sorption capacities were obtained to be 13.9, 46.6, 124 and 105 mg g^–1 for copper, lead, AB9 and BR18 respectively.     

EQCM Study of the Couple Thallium(I)/Thallium Amalgam at a Thin Film Mercury Electrode

EQCM and voltammetric data show that thallium(I) ions, which are adsorbed in the region of the positive surface charge, most probably, in the form of the ionic pairs, are not reduced. In this potential region, thallium(I) ions are reduced directly from the solution. At more negative potentials, the previously adsorbed stable ionic pairs slowly undergo transition into the less stable form. From this form, thallium(I) ions can be reduced or desorbed into the solution. The process is best described by a model of one electron, i.e., full charge transfer.     

Preparation of Functional Fluorescent Microspheres Used for HTS and Their Interaction with Biomolecules

There is considerable interest in protein adsorption onto microspheres because of its importance in a wide range of biomedical applications, such as artificial tissues and organs, drug delivery systems, biosensors, solid-phase immunoassays, immunomagnetic cell separation and immobilized enzymes or catalyst. It has been well known that the interaction between proteins and microspheres plays important roles in this process. Major interaction involved in the adsorption can be classified as electrostatic, hydrophobic and hydrogen-bonding. Indeed, adsorption of proteins onto microspheres is a complex process and often can involve many dynamic steps, from the initial attachment of the protein on the surface of microspheres to the equilibrium. Also the conformation of proteins probably occurs to a certain degree of deformation or structural change due to the large area of contact. Recently, much interest has been shown in sulfonated microspheres, since sulfonate-group itself is one of components in bio-bodies, as well as is sensitive to the change of pH or ionic strength. Indeed, so far, scanty investigations have been performed in the full range. Also few researches have involved the data on adsorption rate and the maximum amount of protein adsorbed, or the reversibility of the process and conformational change of protein adsorbed as well.In present study, BSA (bovine serum albumin) was chosen as the model protein and sulfonated PMMA [poly(methyl methacrylate)] microspheres as the matrix to investigate the adsorption process.The purpose is to show some information especially the intrinsic information involved by the adsorption process Adsorption of BSA onto sulfonated microspheres (MS) has been investigated as a function of time, protein concentration and pH. The adsorption appears to be a reversible process and the presence of sulfonate groups can play important roles in the adsorption process, so as to increase the amount of protein adsorbed and influences the interaction of BSA molecules. Fig. 1 also shows that the reciprocation between unadsorbed and adsorbed BSA or rearrangement of adsorbed BSA molecules does not produce visible change in the properties of the adsorbed protein. Close to the isoelectric point of BSA (pI 4.7), the amount of protein adsorbed exhibits a maximum. A higher or lower pH results in the significant decrease of the adsorption amount. This is related to the dependence of BSA conformations at different pH conditions.     

A Novel Model for Protein Immobilization on Microspheres

The immobilization of proteins, especially receptor proteins commonly used in high through-put screening of drugs (HTS), have received great attention in recent years. There are many successful isothermal models for describing the adsorption of protein onto solid surface, such as Langmuir model, Bi-Langmuir model, Fowler model, Freundlich model, Freundlich-Langmuir model and Tekmin model etc. In all these models, Langmuir model was the most favorable one model accepted by many researchers, but the experimental results showed that it was not entirely fit to all adsorption behaviors. So new models were required for describing protein adsorption onto microspheres in different conditions.In our research, a novel isothermal model, including Langmuir and other adsorbing behaviors was presented basing on the holding degree of surface active sites and the interaction styles of protein immobilization. In Langmuir model, the adsorbing amount of protein was described as [PS] =Km[P]/1 + K[P], where [PS] was the concentration of adsorbed protein, [P] was the concentration of freeprotein at equilibrium state, and Km and K was constant. According to the interactions of protein and ligands, there were three patterns in the interactions of protein and ligands. On the similar assumption that the interaction of protein and microspheres were three styles, and based on the definition of the holding degree of surface active sites (Y), three adsorption behaviors could be described as Y K[ P ]φ/ K[P]φ+1 or ln K + φ ln[P] =ln(Y/1-Y) in which [P] was the concentration of free protein at equilibrium state, and φ and K was constant. Different scale of φ presented different adsorption behaviors, especially when φ was 1, the adsorption behavior was Langmuir adsorbing model. Figure I indicated the different adsorbing results in different adsorption behaviors (φ＞1, φ＜1,and φ=1).     

Synthesis,characterization and properties of methylaminocellulose

Homogeneously prepared tosylcelluloses (TC) with degrees of substitution (DS) of DS_Tos 0.1–1.8 were used as intermediates for the synthesis of methylaminocelluloses (MAC) by nucleophilic substitution with methylamine. TC with DS_Tos up to 1.1 were shown to be valuable intermediates for selective synthesis of MAC with DS_MA varying from 0.1 to approximately 1. No nucleophilic substitution was observed at higher DS_Tos. At the chosen reaction conditions (60 °C, 48 h) residual tosyl moieties remained unchanged and little hydrolysis took place. The samples obtained were characterized by means of elemental analysis, FTIR and ¹³C CP/MAS NMR spectroscopy. ¹³C CP/MAS NMR spectroscopy was found to be an efficient tool for quantification of DS_MA. Furthermore, the swelling behaviour in water was investigated and preliminary tests concerning the bilirubin adsorption capacity of MAC were carried out.     

Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004     

吸附溶出伏安法测定毗喳酮的研究

本文报道了用吸附溶出伏安法测定毗喳酮.以悬汞电极为工作电极，在Na}B,O,-NaOH介质(pH=10)中，毗喳酮产生一尖锐的吸附还原峰,E，二一1. 29V (vs. SCE )，峰电流与毗喳酮浓度在2. 0 X 10-'-8. 0 X 10-smol " L-’范围内呈良好的线性关系.检测限为2. 0 X 10-0mol " L-'(富集90s).本文对毗喳酮在悬汞电极上的电化学行为进行了探讨，对测定毗喳酮的最佳条件进行了详细的选择，利用本法测定了片剂中毗喳酮含量，结果满意.