Metal furnace heated by flame as a hydride atomizer for atomic absorption spectrometry: Sb determination in environmental and pharmaceutical samples

The present work describes a metallic hydride atomizer for atomic absorption spectrometry, by evaluating the performance of the Inconel 600^® tube. For this purpose, stibine was used as the model volatile compound and antimony determination in river and lake sediments and in pharmaceutical samples was carried out to assess the metal furnace performance. Some parameters are evaluated such as those referring to the generation and transport of the hydride (such as KBH₄ and acid concentrations, carrier gas flow rate, injected volume, etc.), as well as those referring to the metal furnace (such as tube hole area, flame composition, long-term stability, etc.). The method presents linear Sb concentration from 2 to 80 μg L⁻¹ range (r > 0.998; n = 3) and the analytical frequency of ca. 140 h⁻¹. The limit of detection (LOD) is 0.23 μg L⁻¹ and the precision, expressed as R.S.D., is less than 5% (40 μg L⁻¹; n = 10). The accuracy is evaluated through the reference materials, and the results are similar at 95% confidence level according to the t-test.     

固相萃取-气相色谱-高分辨质谱法测定巢湖水中半挥发性有机化合物

描述了巢湖水中半挥发性有机化合物的提取、测定过程和初步结果。湖水中半挥发性有机化合物的提取采用XAD-2和XAD-4混合树脂富集，用气相色谱-高分辨质谱法测定了所萃取的有机化合物，并给出相应的分子式和结构式。春季湖水中检测到14种有机化合物。     

Study of parameters associated with the determination of cadmium in lake sediments by slurry sampling electrothermal atomic absorption spectrometry

Cadmium concentration in lake sediments is determined by suspending the solid samples in a solution containing 5% (v/v) concentrated nitric acid and 0.1% (v/v) Triton X-100. Three modifiers were tested for the direct determination. The furnace temperature programmes and appropriate amount for each modifier were optimised to get the highest signal and the best separation between the atomic and background signals. The drying stage is performed by programming a 400 °C temperature, a ramp time of 25 s and hold time of 10 s on the power supply of the atomiser. No ashing step is used and platform atomisation is carried out at 2200 °C. W–Rh permanent modifier combined with conventional modifier by delivering 10 μl of 0.50% (w/v) NH₄H₂PO₄ solution was the best chemical modifier for cadmium determination. This modifier also acts as a liquid medium for the slurry, thus simplifying the procedure. Calibration is performed using aqueous standards in the 1–5 μg l⁻¹ range. The optimised method gave a limit of detection of 0.56 ng ml⁻¹, characteristic mass of 10.1±0.8 pg for aqueous standard, 9.6±0.7 pg for slurry samples containing different Cd concentrations and good precision (7.6–5.2%). The method was validated by analysing four certified reference lake sediment materials: LKSD-1, LKSD-2, LKSD-3 and LKSD-4; satisfactory recoveries were obtained (90.0–96.3%) and no statistical differences were observed between the experimental and the certified cadmium concentration. The developed methodology was used to determine cadmium in three ‘real’ sediment samples from lakes in the area of Wielkopolski National Park, Poland.     

Multiresidue determination of UV filters in water samples by solid‐phase extraction and liquid chromatography with tandem mass spectrometry analysis

UV filters, contained in sunscreens and other cosmetic products, as well as in some plastics and industrial products, are nowadays considered contaminants of emerging concern because their widespread and increasing use has lead to their presence in the environment. Furthermore, some UV filters are suspected to have endocrine disruption activity. In the present work, we developed an analytical method based on liquid chromatography with tandem mass spectrometry for the determination of UV filters in tap and lake waters. Sixteen UV filters were extracted from water samples by solid‐phase extraction employing graphitized carbon black as adsorbent material. Handling 200 mL of water sample, satisfactory recoveries were obtained for almost all the analytes. The limits of detection and quantification of the method were comparable to those reported in other works, and ranged between 0.7–3.5 and 1.9–11.8 ng/L, respectively; however in our case the number of investigated compounds was larger. The major encountered problem in method development was to identify the background contamination sources and reduce their contribution. UV filters were not detected in tap water samples, whereas the analyses conducted on samples collected from three different lakes showed that the swimming areas are most subject to UV filter contamination.     

1980—2018年镇赉县湿地景观格局变化与人为干扰的关系

以吉林省最大湿地保留区镇赉县为研究区,基于1980—2018年8期土地利用数据,采用网格分析法研究湿地景观格局变化规律及景观指数与人为干扰度的关系。结果表明：（1）镇赉县湿地面积减少290.7 km2,水体、滩地、沼泽变化率分别为-0.45,-2.97和-4.84 km²·a^-1。（2）镇赉县湿地率（PLAND）下降6.1%,且从西北部向东南部逐渐递增;斑块数量（NP）与斑块平均面积（AREA_MN）均呈先上升后下降的趋势,东南部湿地景观破碎化加剧,中部破碎化减缓;湿地连通度的空间分布格局为西北向东南递增,斑块结合度指数（COHESION）在中部地区显著增加,在东南部地区缓慢降低。（3）镇赉县湿地人为干扰度逐渐增强、耕地面积的增加和交通网的扩张是镇赉县湿地面积萎缩、景观破碎化加剧和连通度降低的主要人为原因。人为干扰度与NP呈显著正相关,与PLAND、AREA_MN、COHESION均呈负相关。稳定西南部和东北部耕地中湿地斑块,进一步加强中部湿地水体连通性,排查东南部湿地核心区违规建筑,实施分区治理,加强对镇赉县现有湿地的保护,以期实现区域可持续发展。     

片段化森林中檵木幼苗种内叶经济性状变异及其驱动因子

在异质性生境中,种内功能性状变异有助于植物对环境的适应,进而影响种群更新、群落构建和生态系统过程。探讨了种内叶经济性状的变异及受生境异质性的塑造情况。以千岛湖片段化生境中的常见种檵木（Loropetalum chinense）的幼苗为研究对象,测定了200株檵木幼苗个体水平的7个叶经济性状（比叶面积SLA、叶全碳量C、叶全氮量N等）及其对应的生境因子（郁闭度、土壤全碳量、土壤全氮量等）,采用相关性检验、主成分分析和线性混合效应模型等方法探讨片段化森林中檵木幼苗的种内叶经济性状变异及生境异质性对该变异的驱动作用。结果显示：（1） 在7个叶经济性状所构成的21对相关性分析中,有12对显著相关。经主成分分析降维后,主成分1（PC1）占性状总变异的43.02%,主要与比叶面积、叶绿素浓度、叶全氮量呈正相关,与叶干物质质量分数和叶碳氮比呈负相关,体现了檵木的种内叶经济谱,可反映叶片的最大光合效率。（2）片段化对生境条件和叶经济性状均有影响。岛屿森林群落的郁闭度显著低于大陆。相对于大陆,岛屿中的檵木幼苗趋向于更小的PC1值（缓慢投资-收益策略）;大岛边缘较大岛内部偏向于更小的PC1值。（3）生境因子中,郁闭度对PC1具有显著正效应。研究表明,片段化生境中的檵木在幼苗阶段存在叶经济谱,生境片段化可通过影响生境条件进而改变檵木幼苗的叶经济性状。随着生境片段化程度的加剧,檵木幼苗的叶经济性状逐渐向缓慢投资-收益策略靠拢。     

内陆水体叶绿素a含量定量检测的研究

以武汉东湖为实验基地,通过对其水体的多次检测,获得了从2006年6月到9月4个月的东湖水体透射光谱,并与蒸馏水透射光谱进行比较,对东湖水富营养化程度进行了定性分析.采用一种新的测量方法得到叶绿素a浓度与677 nm和703 nm处相对强度的差值和比值有很好的线性相关性,建立了东湖水体叶绿素a含量的准确定量检测模型,为实现对东湖水实时、快速、准确监测提供了基础,为高精度遥感水质分析提供了参考.     

双电极法现场快速检测地下水和湖水中碳酸氢根和碳酸根

地下水和湖水中碳酸氢根( HCO-3)和碳酸根( CO2-3)含量是地球化学碳行为和碳循环的重要表征,但两种离子的浓度易受环境影响而改变,因此,地下水和湖水中HCO-3和CO2-3真实含量的测定一直是个难题。实验利用CO2的水解平衡,通过pH电极和二氧化碳电极联用,建立了HCO-3和CO2-3现场快速测定的新方法,解决了地下水和湖水中HCO-3和CO2-3真实含量的测定难题。研究结果表明,在pH=4.8±0.1的底液中, HCO-3和CO2-3的线性范围分别为0.027~570 mg/L和1.25×10-8~39.7 mg/L。共存的金属离子、强酸阴离子(K+、Na+、Mg2+、Cl-、SO2-4,100 mg/L)、弱酸阴离子和弱酸(HSO-3、NO-2、HOAc,50 mg/L)对测定干扰小于5%。实际水样加标实验回收率在95.2%~99.2%之间,相对标准偏差为2.6%~3.7%。与酸碱滴定法进行对比,本方法的准确性良好。但方法受温度影响,因此标准溶液与样品应在同一温度下测量。总体而言,双电极法灵敏、快速、经济且电极携带方便、操作简单、对环境要求不高,十分适合现场和室内一般自然水体的快速检测。本方法已成功应用于青海省地下水和青海湖湖水中HCO-3和CO2-3的现场测定。实验表明,海东地区地下水样品pH在6.4~7.4之间,HCO-3含量为234~4096 mg/L,CO2-3含量为0.16~1.89 mg/L;青海湖湖水样品pH≈8.7,HCO-3含量范围在1.36~1.86 g/L,CO2-3含量在32.3~43.9 mg/L,与文献结果吻合。     

Sediment records of Sb and Pb stable isotopic ratios in Lake Qinghai

A sediment core in Lake Qinghai in northwest China was collected in 2006. ¹³⁷Cs and ²¹⁰Pb activities were analyzed to investigate the chronology of the sediment core. Sb and Pb concentrations, and Pb stable isotopic ratios were analyzed to study the historical atmospheric deposition records and sources of Sb over the past 15 centuries. The Sb concentration was 4.21 ± 1.52 μg/g in the sediments, its vertical distribution of Sb shows three large peaks in the recent two centuries, 1799, 1896 and 1944, coincided with Sb contamination from large wars, respectively. The peak in 1920 responded the large earthquake that happened in northern China, which was not far away from Lake Qinghai. The Sb/Pb ratio, ²⁰⁶Pb/²⁰⁷Pb and ²⁰⁸Pb/²⁰⁶Pb results suggest that Sb and Pb were probably from the ores in South China and coals in North China before 1965, but obviously from uses of leaded gasoline after 1965.     

红树林湿地土壤矿物的分析

以湛江湾南海堤典型红树林湿地土壤为研究对象,采用X射线衍射(XRD)和傅立叶变换红外光谱(FTIR)快速批量鉴定土壤中矿物成分,利用扫描电子显微镜(SEM)观察土壤颗粒形貌特征并获得化学成分组成信息;同时采集附近光滩土壤样品进行对比研究,以揭示红树林湿地土壤特殊的生态环境特征。结果表明,红树林湿地土壤矿物主要由高岭石、石英、白云母、埃洛石、地开石和蛇纹石等组成;与光滩土壤相比,红树林湿地土壤矿物类型多样,而光滩土壤矿物相对单一,主要为石英和高岭石;红树林湿地土壤颗粒以片状聚合体为主,主要元素组成为C、O、S、Al、Si、Mg、Fe等,常见含有Cu、Zn、Mo等重金属元素。同时发现红树林湿地土壤颗粒含有较丰富的硫化物;而光滩土壤未发现上述特征,表明红树林湿地处于一个特殊的生态环境,土壤沉积物中富含有机质、Fe、S等,比一般潮滩更易于富集硫化物或重金属。