超声场下苯酚吸附相平衡和均相催化剂氧化降解实验研究

测定了常规条件和超声场条件下苯酚在活性炭上的吸附等温线,并研究了超声再生活性炭和均相催化剂氧化降解苯酚实验.研究结果表明,超声场作用下苯酚在活性炭上的吸附等温线降低,平衡吸附量减少,被脱附下来的苯酚及时被Cu2 和Fe3 型催化剂氧化降解,吸附剂得到更彻底再生,避免了二次污染,而且再生后的活性炭均具有较高的二次吸附能力,对于处理低浓度含酚废水具有实际意义.     

Native agarose gel electrophoresis and electroelution: A fast and cost‐effective method to separate the small and large hepatitis B capsids

Hepatitis B core antigen (HBcAg) expressed in Escherichia coli is able to self‐assemble into large and small capsids comprising 240 (triangulation number T = 4) and 180 (triangulation number T = 3) subunits, respectively. Conventionally, sucrose density gradient ultracentrifugation and SEC have been used to separate these capsids. However, good separation of the large and small particles with these methods is never achieved. In the present study, we employed a simple, fast, and cost‐effective method to separate the T = 3 and T = 4 HBcAg capsids by using native agarose gel electrophoresis followed by an electroelution method (NAGE‐EE). This is a direct, fast, and economic method for isolating the large and small HBcAg particles homogenously based on the hydrodynamic radius of the spherical particles. Dynamic light scattering analysis demonstrated that the T = 3 and T = 4 HBcAg capsids prepared using the NAGE‐EE method are monodisperse with polydispersity values of ～15% and ～13%, respectively. ELISA proved that the antigenicity of the capsids was not affected in the purification process. Overall, NAGE‐EE produced T = 3 and T = 4 capsids with a purity above 90%, and the recovery was 34% and 50%, respectively (total recovery of HBcAg is ～84%), and the operation time is 15 and 4 times lesser than that of the sucrose density gradient ultracentrifugation and SEC, respectively.     

A Hairpin Electrochemical Aptasensor for Sensitive and Specific Detection of Thrombin Based on Homogenous Target Recognition

An electrochemical aptasensor was developed for sensitive and specific detection of thrombin by combining homogenous recognition strategy and gold nanoparticles (AuNPs) amplification. Streptavidin‐alkaline phosphatase was used as reporter molecule. Compared with the traditional hairpin aptasensor monitoring the distance of the redox molecule from the electrode surface, the proposed aptasensor successfully overcome the limitations of distance and improved the stability and high affinity of the aptamer hairpin through homogenous recognition, which enhanced the sensitivity and selectivity of the sensors effectively. Additionally, AuNPs were employed to increase the active area and conductivity of the electrode, thus, improving the sensitivity of the aptasensor. As a result, the designed thrombin detection sensor obtained a lower detection limit of 0.52 pM in buffer and 6.9 pM in blood serum.     

TiB2/均相硼掺杂TiO2核/壳结构提升光催化氧化水产氧活性

光催化可实现污染物降解、分解水制氢和CO2还原等多种氧化还原反应, 因而受到了广泛关注. 光催化材料中光生电荷的数目与氧化还原能力直接影响光催化反应效率, 在许多光催化反应中, 光生空穴氧化反应被认为速控步骤. 以光催化分解水为例, 质子的还原是单电子过程, 水氧化产生氧气则涉及四个电子. 空穴的高能量不仅可赋予其高的氧化能力,还能提高其迁出表面的能力, 因此具有重要研究价值.我们组的前期工作表明, 以TiB2作为前驱体, 采用水热合成和焙烧两步法可制备出间隙硼掺杂的金红石相或锐钛矿相TiO2, 间隙硼掺杂可显著降低价带顶, 提升光催化氧化水产氧性能. 然而, 在已有的结果中, 间隙硼掺杂浓度在TiO2中均呈现从内向外逐渐增加的梯度分布, 这意味着硼掺杂浓度有限, 且表层更低的价带顶不利于体相光生空穴向表面迁移, 因此亟需实现TiO2中均相的间隙硼掺杂.本文以湿化的氩气为水解环境, 将水解过程限域在TiB2的表面以减少硼原子流失; 同时提高水解温度, 使残留的硼原子形成间隙掺杂, 避免其在二次焙烧时扩散, 从而在TiB2核的表面所形成的TiO2壳层中实现均相间隙硼掺杂, 显著提高了光催化氧化水产氧活性. 多种表征结果表明, 直径约为6-10 μm的TiB2核表面形成了厚约400 nm的TiO2壳层, 在TiO2/TiB2中TiO2壳层重量比约为30%, TiO2壳层中锐钛矿相TiO2占比为65 wt%, 金红石相TiO2占比为35 wt%. TiO2壳层中间隙硼为均相分布, 硼掺杂显著降低了价带顶位置, 提高了光生空穴的氧化能力, 从而使得TiB2/TiO2展现出比未掺杂的金红石、锐钛矿相及两者混合相的TiO2均具有更高的光催化氧化水产氧的能力.     

A new catalytic method for the synthesis of boroxanes

A new Ru-H complex catalyzed O-borylation of boronic acids with vinylboronates leading to boroxane bond formation with evolution of ethylene is described. Under the optimum conditions, when [Ru(CO)Cl(H)(PPh₃)₃] and excess vinylboronate are used, the reaction gives exclusively the corresponding boroxane in high yield. The proposed mechanism of catalysis is supported by the results of the equimolar reaction of Ru-B complex with 1,3,2-dioxaborinan-2-ol.     

Catalytic effect of lucunary heteropolyanion containing molybdenum and tungsten atoms on decolorization of direct blue 71

In this research,a lucunary Keggin structure,[PMo₂W₉O₃₉]^7- was selected as an efficient homogenous catalyst for degradation of an azo dye（direct blue 71） and a simple method was developed for degradation of DB71.The method is based on the oxidation of azo dye in the presence of a lucunary Keggin form of polyoxometalates,K₇[PMo₂W₉O₃₉]? 19H₂O,as a homogenous catalyst at room temperature.The reaction is monitored spectrophotometrically by measuring the absorbance of dye atλ=585 nm.Some parameters including concentration of catalyst,concentration of H₂O₂,pH and reaction time were investigated and optimized. Results show that K₇[PMo₂W₉O₃₉]? 19H₂O is more efficient in the presence of hydrogen peroxide.Degradation of dye in the presence of the catalyst and H₂O₂ could lead to the disappearance approximately 65%of dye after 60 min.But degradation for the same experiment performed in the absence of catalyst or in the absence of H₂O₂ was 22%or 5%respectively.Approximately 87% azo dyes has been eliminated after 90 min in the presence of catalyst,H₂O₂ and optimize conditions(0.6 g/L of K₇[PMo_2- W₉O₃₉H₉H₂O,0.08 mol/L hydrogen peroxide and room temperature).     

Geometric realization of Adams maps

Let G/P be a homogenous space with G a compact connected Lie group and P a connected subgroup of G of equal rank. As the rational cohomology ring of G/P is concentrated in even dimensions, for an integer k we can define the Adams map of type k to be l _k : H*(G/P, ℚ) → H*(G/P, ℚ), l _k (u) = k ⁱ u, u ∈ H ²ⁱ (G/P, ℚ). We show that if k is prime to the order of the Weyl group of G, then l _k can be induced by a self map of G/P. We also obtain results which imply the condition that k is prime to the order of the Weyl group of G is necessary.     

单碱基多样性的非测序检测

单碱基多样性（SNP）是最常见的基因突变形式之一,经研究证明与很多疾病相关。虽然测序是检测SNP的重要方法,但其需要检测仪器,且检测时间较长,限制了其临床应用。本文综述了SNP的常见非测序分析方法。首先讨论了检测的热力学问题,并归纳了主要的检测策略：基于杂交的检测,基于链取代反应的检测和酶介导的检测。在三维均相检测方法中,主要介绍了不同信号开关策略,如荧光开关、酶识别开关和场效应开关。三维原位检测不仅能检测SNP,还能提供其细胞定位信息,在细胞异质性较高时更具优势。二维界面检测的识别反应速率和杂交效率受到一定影响,但界面检测能进一步减小干扰,亦便于实现高通量检测。以DNA正四面体探针界面为代表的改良界面具有优良的灵敏度和特异性。同时本文亦讨论了现有方法的局限性,并对SNP非测序检测研究进行展望。     

An analytical-based method for studying the nonlinear evolution of localized vortices in planar homogenous shear flows

Recent experimental and numerical studies have shown that the interaction between a localized vortical disturbance and the shear of an external base flow can lead to the formation of counter-rotating vortex pairs and hairpin vortices that are frequently observed in wall bounded and free turbulent shear flows as well as in subcritical shear flows. In this paper an analytical-based solution method is developed. The method is capable of following (numerically) the evolution of finite-amplitude localized vortical disturbances embedded in shear flows. Due to their localization in space, the surrounding base flow is assumed to have homogeneous shear to leading order. The method can solve in a novel way the interaction between a general family of unbounded planar homogeneous shear flows and any localized disturbance. The solution is carried out using Lagrangian variables in Fourier space which is convenient and enables fast computations. The potential of the method is demonstrated by following the evolved structures of large amplitude disturbances in three canonical base flows, including simple shear, plane stagnation (extensional) and pure rotation flows, and a general case. The results obtained by the current method for plane stagnation and simple shear flows are compared with the published results. The proposed method could be extended to other flows (e.g. geophysical and rotating flows) and to include periodic disturbances as well.     

Mathematical modeling of interrelationships among cutting angles,setting angles and working angles of single-point cutting tools

The angles of a cutting tool play a key role in determining its cutting efficiency. However, once the tool has been mounted on a machine tool, setting errors inevitably cause the working angles of the tool to deviate slightly from the designed cutting angles. Accordingly, this study develops mathematical models to analyze the interrelationships among the tool angles, the setting angles and the working angles. In the proposed approach, a process of homogeneous coordinate transformation is employed to develop a kinematic model of the cutting tool such that the working angles can be derived given the tool angles and setting angles. Mathematical formulae are then developed to inversely derive the tool angles required to generate the specified working angles given prior knowledge of the setting angles. An illustrative numerical example is presented to demonstrate the validity of the proposed approach. Overall, the numerical results confirm that the methodology presented in this study provides a comprehensive, simple and versatile means of modeling a variety of conventional single-point cutting tools.