Ignition and increase in Pease limit on current in an ohmically heated high densityZ-pinch

Energetics of an ohmically heated deuterium-tritium high densityZ-pinch has been computed taking into account the energy deposited by the alpha particles produced by fusion. As a result, at higher plasma densities (>10²⁷/m³) and temperatures (>4keV), the pinch current can cross Pease limit and the plasma can get ignited, yielding higher energy gain and neutron yield in a shorter confinement time.     

Performance enhanced down-stream signalling for next generation long-reach 10 Gbit/s passive optical networks

In this paper, we have analyzed the signal processing methods both in digital and optical domain to enhance the transmission performance of downstream signalling in long reach passive optical networks (LR-PONs). The impact of non-linear (NL) equalization through signal processing, i.e. Volterra Equalization (VE), Digital Backpropagation (BP) and Optical Phase Conjugation with Non-linearity Module (OPC-NM) is investigated, in 10 Gbit/s (XG) DP-QPSK long-reach wavelength division multiplexed (WDM) PONs without midspan repeaters over 120 km standard single mode fibre (SMF) link for down-stream signals. Due to the compensation of optical Kerr effects, the sensitivity penalty is reduced to 2 dB by BP algorithm, 1.5 dB by VE algorithm and 2.69 dB by OPC-NM. Moreover, with the implementation of NL equalization technique we are able to get the transmission distance of 126.6 km SMF for the 1:1024 split-ratio at 5 GHz channel spacing in the non-linear region. Furthermore, the concept of super passive optical network (S-PON) is also evaluated, which involves a repeater stage consisting of optical amplifiers, to study the feasibility for receiver side signal processing and simplification.     

Removal of water adsorbed on flouride glass surfaces by NF3 plasma processing

A new method to remove water adsorbed on flouride glass preforms is reported. This method, using NF₃ plasma, can remove surface water on fluoride glasses     

Correlation between helical surface waves and guided modes of an infinite immersed elastic cylinder

Scattering of obliquely incident plane acoustic waves from immersed infinite solid elastic cylinders is a complex phenomenon that involves generation of various types of surface waves on the body of the cylinder. Mitri [F.G. Mitri, Acoustic backscattering enhancement resulting from the interaction of an obliquely incident plane wave with an infinite cylinder, Ultrasonics 50 (2010) 675-682] recently showed that for a solid aluminum cylinder, there exist acoustic backscattering enhancements at a normalized frequency of ka?0.1. The incidence angle α_c at which these enhancements are observed lies between the first (longitudinal) and second (shear) coupling angles of the cylinder. He also confirmed the observations previously reported by the authors that there exist backscattering enhancements of the dipole mode at large angles of incidence where no wave penetration into the cylinder is expected. In this paper, physical explanations are provided for the aforementioned observations by establishing a correlation between helical surface waves generated by oblique insonification of an immersed infinite solid elastic cylinder and the longitudinal and flexural guided modes that can propagate along the cylinder. In particular, it is shown that the backscattering enhancement observed at ka?0.1 is due to the excitation of the first longitudinal guided mode travelling at the bar velocity along the cylinder. It is also demonstrated that the dipole resonance mode observed at incidence angles larger than the Rayleigh coupling angle is associated with the first flexural guided mode of the cylinder. The correlation established between the scattering and propagation problems can be used in both numerical and experimental studies of interaction of mechanical waves with cylinders.     

面向下一代航电系统的数据块填装性能

结合光分组交换(OPS)网络和光纤通道(FC)技术的优势, 提出一种下一代航电系统组网方案——基于光分组交换网络的光纤通道技术(FC over OPS)。建立了数学仿真模型, 研究了一种数据块填装算法与网络实时性之间的关系, 分析不同的参数如发送带宽、最低效率门限、发送定时的选取对网络实时性的影响。进一步完成硬件原型设计和仿真, 比较了软件仿真与硬件仿真的结果, 并分析该数据块填装算法的性能。     

Low velocity impact response of flax/polypropylene hybrid roving based woven fabric composites: Where does it stand with respect to GRPC?

Flax-PP based thermally bonded roving (TBR) has a unique structure where the flax fibres remain twist-free and fully aligned along the roving axis. The present study describes an experimental investigation on the low velocity impact (LVI) behaviour of the TBR based woven fabric composites and compares the same with plain woven glass fabric reinforced PP composites (GRPC). Two different fabric architectures namely plain woven (PW) and unidirectional (UD) are fabricated using flax/PP based TBR. These TBR based woven fabrics and the glass fabric/PP sheets are consolidated in a compression moulding machine and the resultant composite-laminates are tested for their LVI behaviour. The impact test results revealed that the glass/PP composites absorb more energy and exhibit a higher peak load than both TBR based PW and UD fabric composites. However, the specific load and energy of all flax/PP composites are higher than the glass/PP composite. The damage tolerance of all composite laminates are evaluated by comparing their flexural strength before and after the impact. It is observed that the proportionate loss in flexural strength due to impact thrust is larger in case of glass/PP composites than all flax-PP composites.     

Some microrheological aspects of wood-pulp fibres subjected to fatigue loading

Wood-pulp fibres are recognized as concentrically-layered, laminated composite tubes of structural reinforcing material, the cellulose microfibrils, embedded in a cementing matrix of hemicellulose and lignin. When the single fibres are subjected to cyclic mechanical action, their morphological behaviour is characterized by the fatigue growth of micro-voids and surface damage which individually and collectively give rise to stress concentrations, and eventually crack development. The progressive damage phenomena, evinced by the surface imaging and optical sectioning techniques through utilizing confocal laser scanning microscopy, are understood to be consequences of the cumulative material micromechanical degradation and subsequent microstructural breakdown of the cellulose microfibrillar framework. This structural breakdown is believed to effect the fibrillation and flexibilization of the fibres This revised version was published online in August 2006 with corrections to the Cover Date.     

PET导电纤维的制取及研究

以过氧化二苯甲酰为引发剂,使丙烯睛在涤沦(PET)纤维上接枝共聚。接枝纤维在含铜化合物,含硫还原剂溶液中反应,制备PET导电纤维。讨论了影响接枝共聚的各种因素,选择出最佳聚合条件。对该纤维的导电成份和结构以及性能进行了研究。     

四硫富瓦烯为介体的碳纤维束葡萄糖氧化酶微电极的研究

本文研究了一种将电子介体四硫富瓦烯(TTF,Tetrathiafulalene)引入葡萄糖氧化酶微电极的新方法,制成了TTF为介体的碳纤维束葡萄糖氧化酶微电极。该电极制作简单,响应迅速、灵敏,电极寿命可达15天。葡萄糖浓度在1。0×10~(-4)～1.5×10~(-3)mol/L范围内有线性关系。检出限为7×10~(-5)mol/L。用于人体血样中葡萄糖测定获得满意结果。     

Thermal Oxidative Stability of Heat-Stabilised Polyamide 66 by Differential Scanning Calorimetry

The thermal stability of heat-stabilised polyamide 66 in an oxidative environment is evaluated by DSC. The oxidative stability of the polyamide decreases as a result of repeated injection moulding. The results also indicate that the presence of glass fibres in the polyamide has a negative influence on the oxidative stability. Both isothermal and dynamic DSC measurements seem to be useful tools for assessing the stability of polyamides and there is a relationship between data determined using both procedures. This revised version was published online in July 2006 with corrections to the Cover Date.