Ionic conductivity of epitactic MBE-grown BaF2 films

We studied parallel conductivities of pure BaF₂ films with thicknesses ranging from 35 to 300 nm, epitaxially grown on Al₂O₃(0 1 2) substrates by molecular beam epitaxy technique. The overall conductivities of the films are found to increase with decreasing thickness. The detailed investigation of the overall conductance as a function of the thickness permits the deconvolution of bulk and boundary effects, the latter being attributed to distinct space charge effects in the interface between BaF₂ film and Al₂O₃ substrate. The (extrinsic) Debye length (λ) is estimated to be about 8 nm at T=593 K, which corresponds to an impurity content of 10¹⁸/cm³ (singly ionized dopant assumed). This is consistent with the fact that we observed a constant boundary contribution for all investigated films (film thickness >4λ). It is also consistent with the Debye length observed in a previous report on CaF₂/BaF₂ heterolayers fabricated by the same technique, in which the low temperature enhancement was also attributed to space charges in BaF₂ [Nature 408 (2000) 946]. Only at low temperatures (below 370 °C), the conductance seems to be influenced by strain effect.     

Kinetically Controlled Solid State Reactions in the System InCl/SnCl2

This paper reports on studies on the reaction of InCl with SnCl₂ to form ternary halides. The reaction route is investigated by x‐ray investigations at different temperatures. Depending on the modification of InCl as educt and on the temperature conditions the reaction follows different pathways which may include intermediate redox reactions of the type In⁺ + Sn²⁺ → In³⁺ + Sn⁰.     

Cs[Er6C]I12 und Cs2Lu[Lu6C]Cl18: Beispiele für quaternäre reduzierte Halogenide der Lanthanide mit isolierten „Clustern”︁

CS[Er₆C]I₁₂ and cs₂Lu[Lu₆C]CI₁₈: Examples for Quaternary Reduced Halides of the Lanthanides with Isolated “Clusters” Cs[Er₆C]I₁₂ and Cs₂Lu[Lu₆C]Cl₁₈ were obtained as byproducts through metallothermic reductions of ErI₃ and LuCl, with cesium in the presence of carbon in sealed tantalum containers at temperatures ranging from 700 to 940 °C. Cs₂Lu[Lu₆C]Cl₁₈ (isostructural with Cs₂Zr[Zr₆H]Cl₁₈, R 3 , a = 981.7 pm, c = 2723.2 pm, Z = 3, R = 0.082, R, = 0.053) contains octahedral [Lu₆C] clusters which are slightly compressed along the threefold axis and edge-bridged by twelve chloride anions to form [Lu₆C]Cl₁₂ units. Six additional Cl in exo positions of the cluster provide octahedral coordination for the seventh Lu³⁺. Cs⁺ occupies anticuboctahedral interstices within the Cl⁺ layers as a part of the (hexagonal) closest packed arrangement. Cs[Er₆C]I₁₂ (trigonal, R 3, a = 1112.0pm, c = 2063.8pm, Z = 3, R = 0.094, R, = 0.068) exhibits [Er₆C]I₁₂ units as well and shows the structural framework of Sc[Sc₆N]Cl₁₂. Instead of Sc³⁺ in octahedral holes, cesium occupies a regular iodide position within the ccp sheets forming [CsI₃] layers. Both halides are compared with other compounds of the lanthanides containing isolated [M₆X₁₂] clusters. The extreme electron deficiency is discussed.     

Ternäre Halogenide vom Typ A3MX6. IV. [1]. Ternäre Halogenide des Scandiums mit Natrium,Na3ScX6 (X = F,Cl, Br): Synthese,Strukturen, Ionenleitfähigkeit

Ternary Halides of the A₃MX₆ Type. IV. Ternary Halides of Scandium with Sodium, Na₃ScX₆ (X = F, Cl, Br): Synthesis, Structures, Ionic Conductivity X-ray studies on single crystals of Na₃ScF₆ and Na₃ScBr₆ show, that Na₃ScF₆ crystallizes with the cryolite type (monoclinic, P2₁/n, Z = 2, a = 560.16(9), b = 580.31(8), c = 812.1(2)pm, β = 90.720(14)°) and Na₃ScBr₆, as the only ternary bromide of the rare earth elements with sodium, in the Na₃CrCl₆ type (trigonal, P3 1c, Z = 2, a = 728.95(7), c = 1309.29(17)pm). The ionic conductivity of powder samples of Na₃ScF₆, Na₃ScBr₆ and of Na₃ScCl₆ was studied by impedance spectroscopy. Activation energies were determined as 1.22 eV, 0.80 eV and 0.71 eV for the fluoride, chloride and bromide, respectively. The differences are explained from the crystal structures and the sizes and polarizabilities of the anions.     

Reactions of Hydrazonoyl Halides 33 1 : Synthesis of Some New 2,3-Dihydro-1,3,4-thiadiazoles Containing Pyrazol-3-yl,Indolin-2-one-2-yl and Indan-1,3-dione-2-yl Moieties

Some new 2,3-dihydro-1,3,4-thiadiazoles containing pyrazol-3-yl, indolin-2-one-2-yl and indan-1,3-dione-2-yl moieties in a good yields obtained from the reaction of hydrazonoyl halides with thiocarbamate and carbodithioate in ethanolic triethylamine respectively. In contrast, pyrazolylthiourea reacts with hydrazonoyl halides under the same condition afford corresponding hydrazonoyl sulfide derivatives.     

Electrochemical Detection of Anions on an Electrophoresis Microchip with Integrated Silver Electrode

A poly(dimethylsiloxane)/glass hybrid microfluidic chip with integrated silver electrode is described for electrochemical detection of anions. The working electrode was directly fabricated on a glass slide and the chip formed by reversibly sealing of a PDMS slab with microchannels to the slide. Under an alkaline phosphate condition, thiocyanide and three halides were sensitively detected. Factors influencing the separation and detection procedure were discussed and optimized. Linear responses over two magnitudes were obtained with limit of detection at the micromolar level.     

One-pot amide synthesis from allyl or benzyl halides and amines by Pd-catalysed carbonylation

Amides can be prepared from allyl or benzyl halides and primary or secondary amines, using Pd(0) catalyst under CO pressure, in a one-pot synthesis. The reaction proceeds through the acyl palladium halide formation which undergoes an acylic nucleophilic substitution from the amine.     

Preparation of anionic phosphine ligands in situ for the palladium-catalyzed Buchwald/Hartwig amination reactions of aryl halides

2-Phenylindenyl phosphine ligand can be changed into anionic phosphine ligand in situ and utilized in the palladium-catalyzed Buchwald/Hartwig amination reactions in DME, providing good to excellent yields of amination products from aryl chlorides, bromides and iodides. ³¹P NMR studies show that the resonance for the anionic phosphine appeared between those of the (2-phenylindenyl)-dicyclohexyl phosphonium salt and (2-phenylindenyl)dicyclohexylphosphine. The calculated results were consistent with the experimental results.     

Structural characterization of methanol substituted lanthanum halides

The first study into the alcohol solvation of lanthanum halide [LaX₃] derivatives as a means to lower the processing temperature for the production of the LaBr₃ scintillators was undertaken using methanol (MeOH). Initially the de-hydration of {[La(μ-Br)(H₂O)₇](Br)₂}₂ (1) was investigated through the simple room temperature dissolution of 1 in MeOH. The mixed solvate monomeric [La(H₂O)₇(MeOH)₂](Br)₃ (2) compound was isolated where the La metal center retains its original 9-coordination through the binding of two additional MeOH solvents but necessitates the transfer of the innersphere Br to the outersphere. In an attempt to in situ dry the reaction mixture of 1 in MeOH over CaH₂, crystals of [Ca(MeOH)₆](Br)₂ (3) were isolated. Compound 1 dissolved in MeOH at reflux temperatures led to the isolation of an unusual arrangement identified as the salt derivative {[LaBr_2.75·5.25(MeOH)]^+0.25 [LaBr_3.25·4.75(MeOH)]^−0.25} (4). The fully substituted species was ultimately isolated through the dissolution of dried LaBr₃ in MeOH forming the 8-coordinated [LaBr₃(MeOH)₅] (5) complex. It was determined that the concentration of the crystallization solution directed the structure isolated (4 concentrated; 5 dilute) The other LaX₃ derivatives were isolated as [(MeOH)₄(Cl)₂La(μ-Cl)]₂ (6) and [La(MeOH)₉](I)₃·MeOH (7). Beryllium Dome XRD analysis indicated that the bulk material for 5 appear to have multiple solvated species, 6 is consistent with the single crystal, and 7 was too broad to elucidate structural aspects. Multinuclear NMR (¹³⁹La) indicated that these compounds do not retain their structure in MeOD. TGA/DTA data revealed that the de-solvation temperatures of the MeOH derivatives 4–6 were slightly higher in comparison to their hydrated counterparts.