Radiation induced decomposition of halogenated organic compounds in water

Decomposition by ionizing radiations of p-chlorophenol and tetrachloroethylene in synthetic water samples at about 2 mg Cl L⁻¹, has been studied on laboratory-scale experiments. Bicarbonate/carbonate and nitrate ions, at two concentration levels (20 and 200 mg HCO₃⁻¹ and 1 and 50 mg NO₃⁻L⁻) were added to synthetic samples in order to evaluate their influence on decomposition yield. At 5 kGy γ dose level, a quantitative degradation of p-chlorophenol is obtained whereas only qualitative consideration can be drawn on tetracholoroethylene. Comparative study with respect to degradation of p-cholophenol solutions (about 2 mg Cl L⁻¹) by γ-rays and electron beam irradiation treatment at 0.5 kGy dose level, are in progress; preliminary results indicate that irradiation with γ-rays seems to be more efficient in terms of removal efficiency respect to electron beams source.     

A convenient two-step synthesis of 6-methylenesubstituted-4-trichloromethyl-2-methylsulfanyl pyrimidines

This work reports a two-step synthetic strategy to obtain a series of 6-methylenesubstituted-4-trichloromethyl-2-methylsulfanylpyrimidines from the cyclization of 5-bromo-4-methoxy-1,1,1-trichloro-pent-3-en-2-ones with 2-methyl-2-pseudothiourea sulfate, followed by nucleophilic substitution of 6-bromomethyl-4-trichloromethyl-2-methylsulfanylpyrimidine with a series of nucleophiles. Alternative strategies to obtain 6-halomethyl-4-trichloro[fluoro]methyl-2-methylsulfanyl pyrimidines have been addressed.     

Identification of a chemical indicator of the rupture of 1,4-β-glycosidic bonds of cellulose in an oil-impregnated insulating paper system

In this study, headspace gas chromatography/mass spectrometry has been used to assess the volatile by-products generated by the ageing of oil-impregnated paper insulation of power transformers. Sealed-glass ampoules were used to age under oxidative conditions 0.5-g specimens of insulating paper in 9 mL of inhibited mineral oil in a temperature range of 60–120 °C and moisture of 0.5, 1 and 2% (w/w). A linear relationship between one of the oil-soluble degradation by-products, i.e. methanol, and the number of ruptured 1,4-β-glycosidic bonds of cellulose, regardless of the type of paper (ordinary Kraft or thermally-upgraded (TU) Kraft paper), was established for the first time in this field. Ageing at 130 °C of model compounds of the Kraft paper constituents (α-cellulose, hemicellulose and lignin) and two cellulosic breakdown by-products (D-(+)-glucose and 1,6-anhydro-β-d-glucopyranose) confirmed that the α-cellulose degradation was mostly responsible for the presence of this molecule in the system. Furthermore, additional 130 °C-tests with six different papers and pressboard samples under a tight control of initial moisture indicated that at least one molecule of methanol is formed for each rupture of 1,4-β-glucosidic bond of the molecular chains. Stability tests showed that the ageing indicator is stable under the oxygen and temperature conditions of open-breathing transformers. The presence of methanol was detected in 94% of oil samples collected from over than 900 in-service pieces of equipment, confirming the potential for this application. Lastly, the tests have shown that oil-oxidation by-products and TU-nitrogenous agents modify the methanol partitioning coefficients in the paper/oil/air system, which makes their study essential over a range of field conditions encountered by power transformers. Results are presented and discussed in comparison with 2-furfuraldehyde, which is the current reference in the domain.     

Evaluation of the stability and analysis of halogenated furanones in disinfected drinking waters

A refined method for the sub-nanomolar analysis of 13 halogenated furanones in chlorinated drinking water is proposed which uses liquid-liquid extraction, methylation where necessary, gas chromatographic separation, and either micro-electron capture or ion trap mass spectrometric detection. Liquid-liquid extraction with methyl tert-butyl ether was demonstrated to be effective for recovery of halogenated furanones. Confirmation of the halogenated furanones identity and reduction of natural organic matter interference were achieved by ion trap tandem mass spectrometry. Compound stabilities and procedural efficiencies were evaluated to permit optimization of the method for reasonable sample volumes and a 1000:1 pre-concentration factor that would permit feasible sample collection in the field. Both chlorinated and brominated analogues of MX (3-chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone) were included in a suite of compounds targeted in a national occurrence study of disinfection by-products.     

Electrical Properties of Polycrystalline Lithium Chloroboracite Prepared by the Sol-Gel Method

The electrical properties of polycrystalline lithium chloroboracite, Li4B7O12Cl, prepared by the sol-gel method were investigated in connection with their structure. Li4B7O12Cl pellets were prepared with different amounts of hydrochloric acid or ammonium chloride. The kind and amount of the chlorine source affected the formation of by-products (Li2B4O7, LiCl, a glass phase) and the morphology of the Li4B7O12Cl pellets. Thus their conductivity, which is dominated by grain boundary response owing to the high porosity of the materials, was also affected. The formation of Li2B4O7 as a by-product led to a higher activation energy and lower conductivity. In those pellets in which Li2B4O7 did form, an increase of the amount of glass phase led to higher conductivities.     

Comprehensive gas chromatography of high-boiling halogenated compounds

Summary Comprehensive gas chromatography is an excellent technique for separating complex mixtures. If, however high-boiling compounds such as polychlorinated biphenyls have to be analysed, proper adjustiment of the temperature of the modulator turns out to be very important in maintaining the performance of the system. It is shown that miniaturisation of the column-to-modulator coupling, adequate selection of the modulating conditions and, for halogenated compound mixtures, the use of a micro electron-capture detector, can solve experimental problems previously encountered with high boilers.     

Kinetics of radical telomerization of vinylidene fluoride in the presence of CCl3Z chain transfer agents

The kinetics of radical telomerization of VDF at 141 °C, initiated by ditertbutylperoxide, in the presence of three chain transfer agents (CTAs), HCCl₃, CCl₄ and CCl₃Br, are presented. The values of the chain transfer constants were assessed as 35, 0.25 and 0.06 at 141 °C for CCl₃Br, CCl₄ and HCCl₃, respectively. The values of the degree of polymerization (DP_n) were obtained for each CTA and were compared for the same CTA concentration. Hence, CCl₃Br behaved as an efficient CTA towards VDF and usually afforded the monoadduct selectively, but in certain conditions the VDF diadduct can also be produced. In contrast, HCCl₃ was not so efficient since a polymeric structure was identified as the major product.     

Analysis of compounds of environmental concern: II. Diphenyl ethers

Nineteen halogenated and/or nitrated diphenyl ethers (currently listed in EPA Method 8111) have been separated on a DB-5/ DB-1701 column pair connected to an inlet splitter and separate electron capture detectors. Retention times are included for 10 additional compounds evaluated for their suitability as internal standards or surrogate compounds for incorporation into Method 8111. Method reproducibility and linearity are discussed, and results are presented for extracts of two real samples spiked with the 19 diphenyl ethers and analyzed using the dual-column dual-detector arrangement.     

Measuring trihalomethane concentrations in water using supported capillary membrane sampling-gas chromatography

The objective of this study was to develop and evaluate a supported capillary membrane sampling-gas chromatography method for the analysis of trihalomethanes (THMs) in drinking water. The effects of experimental parameters, such as flow rate of carrier gas, water temperature, ionic strengths of solutions and transfer line temperature on the system performance were investigated. The results of method detection limit and accuracy and precision studies are reported.     

Multidimensional separation of isomeric species of chlorinated hydrocarbons such as PCB,PCDD, and PCDF

A multidimensional GC-system containing two capillary columns of different polarities, operated within a double oven instrument, was used for the optimized separation of complex isomeric mixtures of various types of chlorinated aromatic compounds such as PCB, PCDD, or PCDF. Electron capture was applied parallel to flame ionization detection to obtain sensitive signals of the PCB or PCDD and the n-alkane standards required for identification by Kovats indices, respectively. Electron capture detection within a valvelessly operated MDGC system forced changes in the usual instrumental set-up, the live-switching coupling piece being located within the second oven of the double oven instrument. This oven is operated isothermally to ensure optimal and interference-free detection, for stable flow conditions within the coupling piece and for the determination of the isothermal retention indices (Kovats), which are much more suitable for identification by retention than the so-called “linear” indices.