BF_3·OEt_2对钼体系催化合成1,2-聚丁二烯的影响

在以加氢汽油为溶剂,MoCl_3(C_7H_(15)COO)_2(Mo)为主催化剂,(i-Bu)_2AlO〈O〉(Al)为助催化剂合成1,2-聚丁二烯的二元催化体系中,添加BF_3CH3·OEt_2等,对体系的催化活性影响显著。以的混合物为第三组份加入催化体系,较大幅度提高了钼系催化体系的活性。在Mo/Bd=8.0×10~(-5)(摩尔比),聚合5小时,丁二烯转化率可达到70％。初步搞清了钼催化体系合成的1,2-聚丁二烯中产生凝胶的条件,推测了凝胶的生成原因,考察了聚合条件对催化活性、分子量及微观结构含量的影响。     

Thermochemistry on the Complex of Erbium Perchlorate with L-α-Glutamic Acid [Er2（L-Glu）2（H2O）6]（ClO4）4·6H2O（s）

A coordination compound of erbium perchlorate with L-α-glutamic acid, [Er2（Glu）2（H2O）6]（ClO4）4·6H2O（s）, was synthesized. By chemical analysis, elemental analysis, FTIR, TG/DTG, and comparison with relevant literatures, its chemical composition and structure were established. The mechanism of thermal decomposition of the complex was deduced on the basis of the TG/DTG analysis. Low-temperature heat capacities were measured by a precision automated adiabatic calorimeter from 78 to 318 K. An endothermic peak in the heat capacity curve was observed over the temperature region of 290-318 K, which was ascribed to a solid-to-solid phase transition. The temperature Ttrans, the enthalpy △transHm and the entropy △transSm of the phase transition for the compound were determined to be： （308.73±0.45） K, （10.49±0.05） kJ·mol^-1 and （33.9±0.2） J·K^-1·mol^-1. Polynomial equation of heat capacities as a function of the temperature in the region of 78-290 K was fitted by the least square method. Standard molar enthalpies of dissolution of the mixture [2ErCl3·6H2O（s）＋2L-Glu（s）＋6NaClO4·H2O（s）] and the mixture {[Er2（Glu）2（H2O）6]（ClO4）4·6H2O（s）＋6NaCl（s）} in 100 mL of 2 mol·dm^-3 HClO4 as calorimetric solvent, and {2HClO4（1）} in the solution A＇ at T=298.15 K were measured to be, △dHm,1=（31.552±0.026） kJ·mol^-1, △dHm,2 = （41.302±0.034） kJ·mol^-1, and △dHm,3 = （ 14.986 ± 0.064） kJ·mol^-1, respectively. In accordance with Hess law, the standard molar enthalpy of formation of the complex was determined as △fHm-=-（7551.0±2.4） kJ·mol^-1 by using an isoperibol solution-reaction calorimeter and designing a thermochemical cycle.     

Hydrothermal Synthesis and Crystal Structure of One 3D Coordination Polymer of Nickle （II） Achieved from 5-Iodo-isophthalic Acid Ligand

A new coordination polymer [Ni（L）（m-bix）（H2O）]n （1, H2L = 5-iodo-isophthalic acid, m-bix=1,3-bis（imidazol-1-ylmethyl）-benzene） has been synthesized by the hydrothermal method and characterized by IR, elemental analysis, powder XRD and single-crystal X-ray analysis. The crystal is of triclinic, space group Pī with a = 9.1638（3）, b = 10.2319（3）, c = 13.2463（4） ？, α = 80.1710（10）, β = 83.671（2）, γ = 70.3790（10）o,C22H19NiIN4O5, Mr = 605.02, V = 1150.85（6） ？3, Dc = 1.746 g/cm3, F（000） = 600, μ = 2.225 mm-1, S = 1.045 and Z = 2. The final R = 0.0388 and wR = 0.1257 for 5089 observed reflections with I 〉 2σ（I）. In the title complex, the M and P layers are arranged alternately to give a double-layer structure by the symmetry related hydrogen bonds, and these double-layers are further joined together to achieve a 2D supramolecular architecture through I···π interaction involving iodine atoms and imidazole rings. The thermal stability of the title complex was studied by thermal gravimetric （TG） and differential thermal analysis （DTA）.     

Sensitivity analysis for a type of statically stable sailcrafts

Two types of sensitivities are proposed for statically stable sailcrafts.One type is the sensitivities of solar-radiation-pressure force with respect to position of the center of mass,and the other type is the sensitivities of solar-radiation-pressure force with respect to attitude.The two types of sensitivities represent how the solar-radiationpressure force changes with the position of mass center and the attitude.Sailcrafts with larger sensitivities undergo larger error of the solar-radiation-pressure force,leading to larger orbit error,as demonstrated by simulation.Then as a case study,detailed formulas are derived to calculate the sensitivities for sailcrafts with four triangular sails.According to these formulas,in order to reduce both types of sensitivities,the angle between opposed sails should not be too large,and the center of mass should be as close to the axis of symmetry of the four sails as possible and as far away from the center of pressure of the sailcraft as possible.     

XMgO·YMg(OH)_2吸附剂除氟机理及其净化水的水质研究

研究了XMg O·YMg(OH)2对水中氟离子的吸附性能,考察了吸附时间、吸附剂用量、含氟水p H值、温度、含氟水初始浓度等因素对吸附的影响。实验结果表明,在较宽的p H(3.4~8.4)值和水温(22~51℃)范围内,XMg O·YMg(OH)2对水中氟离子具有极强的吸附能力,室温下0.4g XMg O·YMg(OH)2可将100m L浓度为30mg F-1·L-1含氟水处理为符合含氟标准的饮用水。氟离子在XMg O·YMg(OH)2上的吸附速率较大,30min内基本达到吸附平衡,吸附平衡符合Langmuir方程,在50min内达到饱和吸附,室温下饱和吸附量为13.46mg·g-1。净化水呈微碱性,含有5.68~15.07mg·L-1Mg2+,有益于人体健康。吸附饱和后的XMg O·YMg(OH)2经焙烧再生,除氟率可达81%。     

"一锅法"N-(2-苯甲酰胺苯基)-水杨醛亚胺/TiCl4·2THF催化乙烯聚合

报道了4个含苯甲酰胺取代的水杨醛亚胺配体: N-(2-苯甲酰胺苯基)-水杨醛亚胺(L1)、 N-(2-苯甲酰胺苯基)-3-甲基水杨醛亚胺(L2)、 N-(2-苯甲酰胺苯基)-3-叔丁基水杨醛亚胺(L3)和N-(2-苯甲酰胺苯基)-3,5-二溴水杨醛亚胺(L4)的合成, 采用 ¹H NMR和HRMS对其结构进行了表征. 在助催化剂甲基铝氧烷(MAO)作用下, 以L3与TiCl₄·2THF为模型催化体系, 在最佳陈化条件(陈化温度为25 ℃, 陈化时间为30 min, 配体与TiCl₄·2THF的摩尔比3∶1)下, 考察了L1~L4/TiCl₄·2THF催化体系Al/Ti摩尔比、 反应时间、 反应温度和聚合压力, 以及配体结构等对乙烯聚合的影响. 结果表明, 随着在水杨醛骨架上氧原子邻位取代基位阻的增大, 催化体系的活性及所得聚乙烯的分子量均有增加, 其中以L3的催化活性最高, 达到224 kg PE/(mol Ti?h). 采用高温 ¹H NMR, ¹³C NMR, GPC-IR和DSC等对由不同配体L1~L4/TiCl₄·2THF得到的聚乙烯样品的微观结构与热性能进行了分析与表征, 结果显示样品为线性高密度聚乙烯, M_n=5.9×10 ⁴~11.9×10 ⁴, 分子量分布(PDI)为21.9~72.1.     

Nonlinear study of the dynamic behavior of a string-beam coupled system under combined excitations

In this paper,the nonlinear dynamic behavior of a string-beam coupled system subjected to external,parametric and tuned excitations is presented.The governing equations of motion are obtained for the nonlinear transverse vibrations of the string-beam coupled system which are described by a set of ordinary differential equations with two degrees of freedom.The case of 1:1 internal resonance between the modes of the beam and string,and the primary and combined resonance for the beam is considered.The method of multiple scales is utilized to analyze the nonlinear responses of the string-beam coupled system and obtain approximate solutions up to and including the second-order approximations.All resonance cases are extracted and investigated.Stability of the system is studied using frequency response equations and the phase-plane method.Numerical solutions are carried out and the results are presented graphically and discussed.The effects of the different parameters on both response and stability of the system are investigated.The reported results are compared to the available published work.     

Some exact solutions of the oscillatory motion of a generalized second grade fluid in an annular region of two cylinders

The velocity field and the associated shear stress corresponding to the longitudinal oscillatory flow of a generalized second grade fluid, between two infinite coaxial circular cylinders, are determined by means of the Laplace and Hankel transforms. Initially, the fluid and cylinders are at rest and at t = 0＋ both cylinders suddenly begin to oscillate along their common axis with simple harmonic motions having angular frequencies Ω1 and Ω2. The solutions that have been obtained are presented under integral and series forms in terms of the generalized G and R functions and satisfy the governing differential equation and all imposed initial and boundary conditions. The respective solutions for the motion between the cylinders, when one of them is at rest, can be obtained from our general solutions. Furthermore, the corresponding solutions for the similar flow of ordinary second grade fluid and Newtonian fluid are also obtained as limiting cases of our general solutions. At the end, the effect of different parameters on the flow of ordinary second grade and generalized second grade fluid are investigated graphically by plotting velocity profiles.     

Recent advances in theoretical models of respiratory mechanics

As an important branch of biomedical engineering, respiratory mechanics helps to understand the physiology of the respiratory system and provides fundamental data for developing such clinical technologies as ventilators. To solve different clinical problems, researchers have developed numerous models at various scales that describe biological and mechanical properties of the respiratory system. During the past decade, benefiting from the continuous accumulation of clinical data and the dramatic progress of biomedical technologies (e.g. biomedical imaging), the theoretical modeling of respiratory mechanics has made remarkable progress regarding the macroscopic properties of the respiratory process, complexities of the respiratory system, gas exchange within the lungs, and the coupling interaction between lung and heart. The present paper reviews the advances in the above fields and proposes potential future projects.