Amperometric determination of pesticides using a biosensor based on a polishable graphie-epoxy biocomposite

The determination of organophosphorus and carbamate pesticides was carried out using an amperometric transducer based on a robust, polishable and easily mechinable biocomposite. The biocomposite material contains graphite powder, a non-conducting epoxy resin and acetylcholinesterase. The enzyme retains its bioactivity in the rigid epoxy-graphite matric. Measurements were carried out with acetylhiocholine as a substrate. Thiocholine produced by enzymatic hydrolysis was oxidized electrochemically at 70 mV (vs. Ag/AgCl in pH 7.0 buffered solution with 0.1 M phosphate and 0.1 m KCl). The decrease rate of substrate steady-state current after the addition of pesticide was used for evaluation. The method of construction allows for the repetitive use of the electrode. Simple polishing procedures are used to regenerate the bioactive transducer surface.     

Continuous flow and flow injection stripping voltammetric determination of silver(I), mercury(II), and bismuth(III) at a bulk modified graphite tube electrode

The epoxy-impregnated graphite tube electrode bulk modified with 2-mercaptobenzoxazole, employed in a wall-jet configuration, was found to be useful for the continuous flow and flow injection stripping voltammetric determinations of Ag^I, Hg^II and Bi^III. For continuous flow, detection limits for Ag^I, Hg^II and Bi^III were 1.8 × 10⁻¹⁰ M, 1.9 × 10⁻⁹ M and 9.5 × 10⁻⁹ M, respectively (10 min accumulation, S/N = 3). Precisions for 5.00 × 10⁻⁹ M Ag^I, 1.00 × 10⁻⁸ M Hg^II and 1.00 × 10⁻⁷ M Bi^III were 10.5%, 5.77 % and 7.90% (relative standard deviations, n = 6), respectively. In the case of flow injection stripping, with a 500 μL injection loop, detection limits of 0.59 ng, 2.0 ng and 120 ng were obtained for Ag^I, Hg^II and Bi^III, respectively (S/N = 3). Selected metal ions, inorganic and organic substances were investigated for interferences. The electrode was tested with a certified sample and then applied to the determinations of the metal ions in a urine and a sea-water sample.     

Application of Graphite-Epoxy Composite Electrodes in Differential Pulse Anodic Stripping Voltammetry of Heavy Metals

An analytical study on the use of graphite-epoxy composite (GEC) electrodes for differential pulse anodic stripping voltammetry (DPASV) of heavy metals is presented. This study is accompanied by microscopic observations of the electrode surface before and after the stripping step in comparison to glassy carbon electrode. GEC electrodes show much better accumulation properties and consequently acceptable behaviour which makes them suitable as working electrodes in the DPASV of heavy metals. Lead determination in real water samples in a batch system as well as some preliminary results in a flow-through system are presented. The detection limits in batch measurements were 100ppb for Cd, 10pb for lead and 50ppb for copper. The detection limit for lead in the flow-through system was similar to that in the batch. The results obtained show that these low cost and easy to prepare materials can be of interest in future research concerning stripping techniques of heavy metals and other analytes.     

Functional Properties and Molecular Degradation of Schizostachyum Brachycladum Bamboo Cellulose Nanofibre in PLA-Chitosan Bionanocomposites

The degradation and mechanical properties of potential polymeric materials used for green manufacturing are significant determinants. In this study, cellulose nanofibre was prepared from Schizostachyum brachycladum bamboo and used as reinforcement in the PLA/chitosan matrix using melt extrusion and compression moulding method. The cellulose nanofibre(CNF) was isolated using supercritical carbon dioxide and high-pressure homogenisation. The isolated CNF was characterised with transmission electron microscopy (TEM), FT-IR, zeta potential and particle size analysis. The mechanical, physical, and degradation properties of the resulting biocomposite were studied with moisture content, density, thickness swelling, tensile, flexural, scanning electron microscopy, thermogravimetry, and biodegradability analysis. The TEM, FT-IR, and particle size results showed successful isolation of cellulose nanofibre using this method. The result showed that the physical, mechanical, and degradation properties of PLA/chitosan/CNF biocomposite were significantly enhanced with cellulose nanofibre. The density, thickness swelling, and moisture content increased with the addition of CNF. Also, tensile strength and modulus; flexural strength and modulus increased; while the elongation reduced. The carbon residue from the thermal degradation and the glass transition temperature of the PLA/chitosan/CNF biocomposite was observed to increase with the addition of CNF. The result showed that the biocomposite has potential for green and sustainable industrial application.     

Biocompatibility of Modified Silica-Protein Composite Layers

Biocomposite layers of silica and various bone-relevant proteins such as collagen, gelatine and commercial collagen hydrolysate can be obtained from coatings of silica sols mixed with proteins in water/dioxane. Investigations into the mechanical and cell proliferation properties for different sol parameters (pH, solvent), type and concentration of proteins, annealing and crosslinking of the biocomposite layers revealed that such coatings are highly biocompatible with excellent mechanical properties.     

Synthesis and characterization of LSMO manganite-based biocomposite

In this paper we study the structural, morphological and magnetic properties of La_0.67Sr_0.33MnO₃ (LSMO) manganite nanoparticles (NPs) and its biocomposite, obtained by mixing NPs of hydroxyapatite (HA). From the studies of X-ray diffraction and Fourier transmission of infrared spectroscopy it is evident that in the biocomposite sample both the individual phases are distinguishable from each other. The measurements of direct current (DC) magnetization and hysteresis loops reveal that the basic magnetic behaviour of LSMO–HA is similar to that of LSMO; however, the admixture of HA makes the sample magnetically softer. From the investigation of transmission electron microscopy it is observed that such a biocomposite is composed of the NPs of LSMO surrounded by HA particles, which can be found suitable for biomedical applications.     

Thermomechanical degradation of PLA‐based nanobiocomposite

Nanobiocomposites are a new class of biodegradable polymer materials with nanometric dispersion of inert particles in a biodegradable polymer matrix that show very interesting properties often very different from those of conventional‐ filled polymers and also biodegradability. An important issue in the applications of the biodegradable polymers is their easy degradability during processing due to the thermomechanical stress or to the presence of humidity. In this work, the thermomechanical degradation behavior of a nanobiocomposite made by a PLA‐based blend and an organomodified montmorillonite has been investigated. The degradation kinetics has been followed by means of rheological, mechanical and morphological characterization. In particular, the influence of temperature and of the presence of humidity have been considered. The presence of the nanoparticles slightly increases the thermomechanical degradation of the pure matrix and in particular with increasing time and temperature processing. In the more severe conditions, indeed, the organomodifier undergoes some slight decomposition of the organomodifier of the clay because of the Hoffmann elimination. The radicals formed through this decomposition enhance the degradation of the matrix. However, this decomposition is at the first stage, and the evolved CO₂ remains entrapped in the clay increasing the level of intercalation and causing also some exfoliation. Then the morphology of the nanobiocomposite changes because of the processing conditions. Moreover, the thermomechanical degradation remarkably increased if the materials are not pre‐dried because of the hydrolytic degradation of the biodegradable polyesters of the matrix. Copyright © 2015 John Wiley & Sons, Ltd.     

纳米羟基磷灰石/羧甲基壳聚糖多孔生物复合材料的制备与性能研究

采用化学沉淀法合成了纳米羟基磷灰石粉体(HAP),以无水乙醇为沥滤剂,以16.7%(质量分数)的柠檬酸水溶液作粘结剂,通过粒子沥滤法制备了HAP/CMCS多孔材料,并对其进行了IR、XRD、SEM、孔隙率及抗压强度的测试。结果表明HAP/CMCS复合材料复合前后两组份的化学组成未发生显著变化,但两相间发生了相互作用。多孔材料孔隙率高,孔径分布范围宽,其尺寸分布大约从几微米到600微米,以圆形为主,具有良好的贯通性,非常有利于组织在其中的长入与扩展。当复合材料中CMCS含量为40%,复合材料/造孔剂的质量比为1:1时,多孔材料的孔隙率接近75%,其抗压强度可达21MPa以上,可以满足骨组织工程支架材料的要求。     

Development of an ion-sensitive field effect transistor based on PVC membrane technology with improved long-term stability

An NH -ISFET sensor based on PVC membrane technology with improved long-term stability has been developed. As a new approach, the plasticizer (tetra-n-undecyl) 3,3′,4,4′ -benzhydroltetracarboxylate (ETH2112) was used in membrane preparation. Its lipophilic nature provides a restricted diffusion of the membrane components to the external solution and improves membrane adhesion to the gate area of the ISFET. The good performance of this plasticizer was confirmed by comparison with usual plasticizers applied in standard ISE technology. Moreover, the durability and stability of the sensor were enhanced by the application of a graphite-epoxy layer as an internal reference between the gate area and the PVC membrane. This composite layer permits the reduction of the optical sensitivity and improves the adherence of the PVC membrane to the ISFET surface. Furthermore, this composite layer acts as a plug, preventing the entrance of water upon the encapsulant-chip interface, thus protecting electrical connections from moisture. As a result, an NH -ISFET with a long-term stability of three months and a sensitivity of −58.7 ± 2.3 mV decade⁻¹ in a linear range of 10⁻⁵ −0.1 mol dm⁻³ has been developed. The application of this sensor to a continuous-flow system has confirmed the feasibility of the technological approach proposed.     

Effect of Calcium Precursors and pH on the Precipitation of Carbonated Hydroxyapatite

Three types of calcium precursors (nitrate, hydroxide and catbonate) were used in the synthesis of carbonated hydroxyapatite (cHA) using a precipitation method via a chemical reaction with di-ammonium hydrogen phosphate as the phosphate precursor. The precipitation method was chosen over many other methods due to its flexibility to changes in processing parameters to control the phases formed, the particle size, as well as, the morphology of the as-synthesized powders. The focus of the study was on cHA as it is deemed to mimic the composition of the human bone much closer as compared to the stoichiometric hydroxyapatite. When the chemical reaction was completed, the precipitate was dried, ground and characterized by x-ray diffraction (XRD), electron microscopy (both FESEM and TEM) and particle size analysis. Only the nitrate precursor produced a single-phase carbonated hydroxyapatite (cHA), whilst the other two precursors produced a secondary calcite phase or did not react fully. This is due to the low solubility of the calcium hydroxide and the incomplete reaction of the calcium carbonate. An increase in pH has been observed to lead to higher carbonate content in the synthesized cHA and a smaller crystallite size.