Polypyrrole Shell@3D‐Ni Metal Core Structured Electrodes for High‐Performance Supercapacitors

Three‐dimensional (3D) nanometal films serving as current collectors have attracted much interest recently owing to their promising application in high‐performance supercapacitors. In the process of the electrochemical reaction, the 3D structure can provide a short diffusion path for fast ion transport, and the highly conductive nanometal may serve as a backbone for facile electron transfer. In this work, a novel polypyrrole (PPy) shell@3D‐Ni‐core composite is developed to enhance the electrochemical performance of conventional PPy. With the introduction of a Ni metal core, the as‐prepared material exhibits a high specific capacitance (726 F g^?1 at a charge/discharge rate of 1 A g^?1), good rate capability (a decay of 33 % in C_sp with charge/discharge rates increasing from 1 to 20 A g^?1), and high cycle stability (only a small decrease of 4.2 % in C_sp after 1000 cycles at a scan rate of 100 mV s^?1). Furthermore, an aqueous symmetric supercapacitor device is fabricated by using the as‐prepared composite as electrodes; the device demonstrates a high energy density (≈21.2 Wh kg^?1) and superior long‐term cycle ability (only 4.4 % and 18.6 % loss in C_sp after 2000 and 5000 cycles, respectively).     

Formation of low-temperature deformation-induced segregations of nickel in Fe–Ni-based austenitic alloys

ABSTRACT

The authors present the results of an investigation in Fe–Ni-Cr austenitic alloys of the low-temperature deformation-induced segregations of nickel that form in the micro regions being (i) located close to grain- and subgrain boundaries and (ii) characteristic of the concentration and magnetic inhomogeneities indicated by the appearance of a dark diffraction contrast at the electron diffraction patterns taken from these regions typical (at the same time) of an enhanced value of Curie temperature. The observed effects were connected with the micro distortions caused by the local change of lattice parameter because of an increase in nickel concentration, as well as in the result of a magnetostriction dilatation. Using methods of the X-ray energy dispersive spectroscopy (XEDS) and atomic-probe body-section radiography (tomography – APT) has made it possible to determine the borders of those regions of austenite that were characteristic of an enhanced concentration of nickel in the fields of the localisation of a deformation-induced segregation of nickel in the vicinity of grain (subgrain) boundaries of austenitic alloys of the types Fe–13Cr–30Ni and Fe–37Ni–3Ti.     

Studying the process of ionization of hydrogen in conditions of its forced delivery to a porous nickel oxide electrode

The hydrogen ionization process is studied experimentally on an industrial sintered nickel oxide electrode in models of sealed nickel-metal hydride batteries. It is shown that the hydrogen ionization rates that are reached during overcharge by high current densities in conditions of forced gas delivery into the electrode pores (up to 40 mA cm^?2) exceed the self-discharge rate of a nickel-hydrogen battery by two orders of magnitude. Up to 70% of hydrogen delivered into the compact assembly block undergoes ionization during forced charge of models of sealed nickel-metal hydride batteries with a closed hydrogen cycle. Two independent methods (potentiostatic and manometric) are used to determine the relationship between rates of hydrogen ionization with the degree of the electrode filling with gas and perform estimation of the process intensity at a unit reaction surface. It is established that, in conditions of forced gas delivery, practically all the hydrogen oxidation current is generated at the surface of the nickel oxide electrode beneath thin films of an electrolyte solution at the rate of 4–5 mA cm^?2. It is shown that the hydrogen oxidation rate on a nickel oxide electrode filled in part by gas is independent of the electrode potential, probably because of a tangible contribution made by diffusion limitations to the overall hampering of the process.     

Solid-state Electrochemistry of Gadolinium Hexacyanoferrate Modified Electrode and Electrocatalytic Properties of Gadolinium Hexacyanoferrate

A new electroactive polynuclear inorganic compound of rare earth metal, gadolinium hexacyanoferrate (GdHCF), was prepared and characterized using the techniques of FTIR spectroscopy, thermogravimetric analysis (TG), UV-Vis spectrometry, X-ray photoelectron spectroscopy (XPS), ICP atomic emission spectroscopy, and EDX. The results of ICP atomic emission spectroscopy, EDX, and TGA indicated that the prepared GdHCF sample had a stoichiometry of NaGdFe(CN)₆·12H₂O (when GdHCF was prepared in NaCl solution). The FTIR spectrum of GdHCF showed that there were two types of water molecules in the structure of GdHCF: one was the interstitial water (5 H₂O), which resulted from the association of water due to H-bonding, and the other was water coordinated with Gd (7 H₂O). The results obtained using XPS showed that the oxidation state of Fe and Gd in the GdHCF sample was +2 and +3, respectively. GdHCF was immobilized on the surface of spectroscopically pure graphite (SG) electrode forming the GdHCF/SG electrode, and the solid-state electrochemistry of the resultant electrode was studied using cyclic voltammetry. The cyclic voltammetric results indicated that the GdHCF/SG electrode exhibited a pair of well-defined and stable redox peaks with the formal potential of E^0′=(197±3) mV. The effects of the concentration of the supporting electrolyte on the electrochemical characteristics of GdHCF were studied, and the results showed that the value of E^0′ increased linearly with the activity of the cationic ion of the supporting electrolyte (lga_Na⁺), with a slope of 54.1 mV, which may become a novel method for determining the activity of Na⁺ in solution. Further experimental results indicated that GdHCF had electrocatalytic activities toward the oxidation of dopamine (DA) and ascorbic acid (AA), and the electrocatalytic current increased linearly with the concentration of DA (or AA) in the range of 1.0–10.0 mmol·L^?1 (for DA) or 0.5–20.0 mmol·L^?1 (for AA).     

Crystallographic report: Bis{[diacetyl‐bis(2,6‐isopropylphenylimine)]nickel(I)(µ‐chloro)}

The first α‐diimine nickel(I) complex having a chloro bridge is reported. The centrosymmetric dinuclear structure of {[ArN?C(Me)C(Me)?NAr]NiCl}₂[Ar?2,6?C₆H₃(i‐Pr)₂] features two chelating α‐diimine ligands and two bridged chlorine atoms, so that a distorted tetrahedral N₂Cl₂ coordination geometry for nickel results. Copyright © 2004 John Wiley & Sons, Ltd.     

Nickel Chloride Promoted Glaser Coupling Reaction in Hot Water

A Glaser coupling reaction of terminal alkynes in the presence of nickel chloride withoutany organics and bases in hot water has been developed, which produces the correspondinghomo-coupling products in good yields.     

La5Al3Ni2 – an Intermetallic Phase Observed upon Crystallization of La50Al25Ni25 Metallic Glass

The yet unknown intermetallic phase La₅Al₃Ni₂ was obtained by partially crystallizing amorphous La₅₀Al₂₅Ni₂₅ at 550 K (further heating above 600 K leads to irreversible disappearance of this phase), and its crystal structure was determined from X‐ray powder diffraction data. The crystal structure of the La₅Al₃Ni₂ phase constitutes a new structure type (Cmcm, a = 14.231Å, b = 6.914Å, c = 10.460Å, oC40) and is built from [Al₃Ni₂] chains surrounded by La atoms. In the ternary system La‐Al‐Ni La₅Al₃Ni₂ is located on the section La₅₀Al_50−nNi_n (0 ≤ n ≤ 50) with the binary compounds LaAl and LaNi as end members. Strikingly, also the crystal structures of the end members can be conceived as chain structures with Al and Ni chains surrounded by La, respectively.     

Paper-like Microfibrous Nickel Catalyst for Hydrogen Production via NH3 Decomposition in Fuel Cell Applications

Recently, miniature H2 generator to power fuel cells for portable/micro electronic devices and passenger propulsion has been the focus of intense research activities1-3. One of the strategies is to find simple CO-free H2 production with novel microreactor…     

镍-酸性铬兰K络合物吸附波

用微分脉冲溶出伏安法研究了镍(11)与酸性铬兰K(ACBK)所生成的络合物在悬汞电极上的电化学特性及电化学反应机理，发现电极反应为镍与酸性铬兰K所生成的络合物吸附在电极表面后发生的不可逆还原。在HCl-硼砂介质中(pH8．67)，络合物在-316mV处有一吸附还原峰，其峰电流与镍浓度在0．001～0．010μ/mL范围内呈现良好的线性关系，其最低检出浓度为0．0005μg／mL。     

Alkyl 3-amino-5-aryl-2-benzoyl-5-oxo-2-pentenoates as new chelating ligands and reagents of heterocyclic synthesis

A method for the synthesis of alkyl 3-amino-5-aryl-2-benzoyl-5-oxo-2-pentenoates from Ni chelates of alkyl benzoylacetates and aroylacetonitriles was proposed. The compounds obtained were used for preparation of ethyl 4-amino-6-aryl-2-phenylnicotinates and Ni and B chelates.