Synthesis of novel tri-podal mesogenic alkenes and side-chain polysiloxanes

Low molecular weight tri-podal biphenyl- and benzoate-type mesogens [C₆H₅C₆H₄O(CH₂)₅SiMe₂CH₂CH₂SiMe₂]₃CH (4), [C₁₁H₂₃O(C₆H₄)₂O(CH₂)₅SiMe₂]₃CH (5) and [MeOC₆H₄OC(O)C₆H₄O(CH₂)₅SiMe₂]₃CH (6) (C₆H₄ = 1,4-phenylene) were obtained, from branched silyl substituted methane precursors [CH₂CH(Me)₂Si]₃CH (1) and (HMe₂Si)₃CH (2). The biphenyl-containing ones (4) and (5) were converted into terminal alkenes, which were subsequently hydrosilylated with poly(methylsiloxanes). The polymer derived from (5) exhibited mesomorphic properties. Such systems have the potential to significantly increase the density of liquid crystal rod-like structures in side chains of linear polymers (or dendritic liquid crystal polymers).     

S180 cell growth on low ion energy plasma treated TiO2 thin films

X-ray photoelectron spectroscopy (XPS) was used to characterise the effects of low energy (<2 eV) argon ion plasma surface modification of TiO₂ thin films deposited by radio frequency (RF) magnetron sputter system. The low energy argon ion plasma surface modification of TiO₂ in a two-stage hybrid system had increased the proportion of surface states of TiO₂ as Ti³⁺. The proportion of carbon atoms as alcohol/ether (COX) was decreased with increase the RF power and carbon atoms as carbonyl (CO) functionality had increased for low RF power treatment. The proportion of C(O)OX functionality at the surface was decreased at low power and further increase in power has showed an increase in its relive proportion at the surface. The growth of S180 cells was observed and it seems that cells are uniformly spreads on tissue culture polystyrene surface and untreated TiO₂ surfaces whereas small-localised cell free area can be seen on plasma treated TiO₂ surfaces which may be due to decrease in C(O)OX, increase in CO and active sites at the surface. A relatively large variation in the surface functionalities with no change in the surface roughness was achieved by different RF plasma treatments of TiO₂ surface whereas no significant change in S180 cell growth with different plasma treatments. This may be because cell growth on TiO₂ was mainly influenced by nano-surface characteristics of oxide films rather than surface chemistry.     

Retention of heavy metal ions on SBA-15 mesoporous silica functionalised with carboxylic groups

Three samples of SBA-15 functionalised with -(CH(2))(3)COOH groups have been prepared by co-condensation, starting from solutions of TEOS and 4-(triethoxysilyl)butyronitrile, acting as -(CH(2))(3)COOH precursor, of different molar compositions. Materials were characterised by X-ray diffraction, nitrogen adsorption, and FT-IR spectroscopy. The pK(a) and the acidic capacity were measured for all samples by potentiometric titration. The acidic capacity increases with increasing amount of -COOH precursor in the synthesis mixture only up to 10% molar of total alkoxysilane. The value for the pK(a)(4.75) is independent of the acidic capacity of the material. The sample prepared starting from an amount of -COOH precursor equal to 10% molar of total alkoxysilane was chosen to test selective interactions with heavy metals of environmental importance (Ag(+), Cd(2+), Fe(3+), Cu(2+), Zn(2+)) at different pH values and ionic strengths. The significant and selective adsorption exhibited by the material has been exploited in a preliminary cation-exchange chromatographic application showing the possibility of eluting the metal ions at different retention times.     

Wide- and narrow-rim functionalised calix[4]arenes: synthesis and characterisation

Functionalisation of calix[4]arene at both the wide and narrow rims leads to the formation of compounds containing bipyridyl, via an amide linkage, at the wide rim and having either a butyl chain, a benzyl group or an alkyl ester functionality at the narrow rim. All compounds were characterised using ¹H and ¹³C NMR spectroscopies. Initial binding studies with Ru(bipy)₂Cl₂ are reported.     

Highly Sensitive Dopamine Detection Using a Bespoke Functionalised Carbon Nanotube Microelectrode Array

Understanding how the brain works requires developing advanced tools that allow measurement of bioelectrical and biochemical signals, including how they propagate between neurons. The introduction of nanomaterials as electrode materials has improved the impedance and sensitivity of microelectrode arrays (MEAs), allowing high quality recordings of single cells in situ using electrode diameters of ≤20 μm. MEAs also have the potential to measure electroactive biological molecules in situ, such as dopamine, a neurotransmitter in the nervous system. Thus, this work focused on fabricating a functionalised carbon nanotube (CNT)‐based MEA to demonstrate its potential for future measurement of small signals generated from excitable cells. To this end, the functionalised CNT MEA has recorded one of the lowest electrochemical interfacial impedances available in the literature, 2.8±0.2 kΩ, for an electrode of its geometric surface area. Electrochemical detection of dopamine revealed again one of the best sensitivity values per area available in the literature, 9.48 μA μM⁻¹ mm⁻². Additionally, a limit of detection of 7 nM was recorded for dopamine using the functionalised CNT MEA, with selectivity against common electrochemical interferents such as ascorbic acid. These results indicate improvement beyond currently available MEAs, along with the feasibility of using these devices for multi‐site detection of physiologically relevant electroactive biomolecules.     

Functionalised tetraarylstannanes Sn[C6H4-R]4 (R=-CH(CH2O)2, -CHO, -COOH, -CHN-NH-C6H3-2,4-(NO2)2, -CH2OH, -CO-NH-CH2-COO-CH3, -CH[N(C2H4)2O]2)

Reaction of tin tetrachloride with the appropriate Grignard reagent gave Sn[C₆H₄-CH(OCH₂)₂]₄ (2), which was transformed to Sn[C₆H₄-CHO]₄ (3) and its hydrazido and amino derivatives Sn[C₆H₄-CHN-NH-C₆H₃-2,4-(NO₂)₂]₄ (5) and Sn{C₆H₄-CH[N(C₂H₄)₂O]₂}₄ (8). Oxidation of (3) produced Sn[C₆H₄-COOH]₄ (4) while reduction of (3) gave Sn[C₆H₄-CH₂-OH]₄ (6). From the acid 4, an amino acid Sn[C₆H₄-CO-NH-CH₂-CO-OCH₃]₄ (7) could be obtained by reaction with the methyl ester of glycine. All compounds were isolated in pure form with yields of 40-64% and were characterised by spectroscopic means (heteronuclear NMR) or by X-ray structure determination (3).     

Poly(urethaneimides) (PUIs) containing tertiary amine groups as precursors for original PUI cationomers

This paper details the synthesis and characterisation of poly(urethaneimides) (PUIs) containing tertiary amine groups and obtained from a polytetramethylene oxide diol (PTMO1000), N-methyldiethanolamine (MDEA), 4,4′-methylene-bis-phenylisocyanate (MDI) and 4,4′-hexafluoroisopropylidene-bis-phthalic anhydride (6FDA). The polymers PTMO1000 (1 − x equiv.) + MDEA (x equiv.)/MDI (2 equiv.)/6FDA (1 equiv.) were obtained in high yields (>90%) through original synthesis, involving the reaction of macrodiisocyanates with an aromatic dianhydride in two steps only. A wide range of complementary techniques including two-dimensional NMR showed that the new method enabled a very good control of the polymer structure. In particular, the tertiary amine content of the PUI copolymers was easily varied over the whole composition range (x: 0 → 1), with interesting prospects for the design of a wide range of ion-containing poly(urethaneimides) by quaternising the tertiary amine groups. The PUI properties (e.g. solubility, viscosity, film-forming ability, etc.) clearly depended upon their tertiary amine content. Up to a tertiary amine content of x = 0.7 equiv., the very good film-forming character of the PUIs enabled to cast strong films suitable for permeability investigations.     

Reaktionen von elektronenreichen Heterocyclen mit Orthocarbonsäure-Derivaten, 4. Mitt. RegioselektiveLewis-Säure-induzierte elektrophile Substitution an Methylindolen mit Orthoameisensäuretriethylester und Trithio-orthoameisensäuretriethylester

The methylindoles3 a–3 c react with ethyl orthoformate1 a or ethyl trithioorthoformate1 b byLewis-acid catalysis regioselectively to bisindolylmethyl-cations4 and to trisindolylmethanes5. In this type of reactions the orthoester electrophiles represent potent acylation equivalents with nearly equal reactivity.

     

Late-Stage Functionalisation of Pyridine-Containing Bioactive Molecules: Recent Strategies and Perspectives

Late-Stage Functionalisation (LSF) is an innovative technique that has been successfully applied to the C−H diversification of pharmaceuticals. However, LSF of the pyridine ring in drug-like molecules is often unselective. As a result, a mixture of structurally related products is obtained, thus making the purification tedious and time-consuming. This review shines a light on recent strategies addressing the selectivity issue in the LSF of complex natural products or drugs containing the pyridine moiety. Specifically, we have reviewed the efforts reported both in academia and industries with the hope of providing a guide for the LSF of elaborated pyridines.