EAST�ŵ����ֵģ�⼰����������

用TSC程序模拟了EAST装置等离子体放电的全过程。模拟中考虑了自举电流，并加入了离子回旋共振加热ICRH和快波电流驱动FWCD，得到了中心电子温度4.5keV、中心离子温度3.8keV、中心电子密度1.2×1020m–3的D形截面的等离子体。根据模拟结果对EAST装置进行了伏秒数分析，并研究了不同等离子体电流上升时间、有效电荷数Zeff对放电的影响。     

Ternary rare-earth alumo-silicides—single-crystal growth from Al flux, structural and physical properties

A number of rare-earth alumo-silicides (R-Al-Si) have been synthesized from the corresponding elements by high-temperature reactions, carried out in excess of aluminum to serve as a flux. Under these experimental conditions, large single crystals of all R-Al-Si ternary phases were readily produced. The crystal structures these ternaries adopt were studied by means of powder and single-crystal X-ray diffraction and were classified as follows: (1) the early rare-earths (R=La, Ce, Pr, Nd, Sm, Gd) yield RAl_xSi_2−x, x∼1, non-stoichiometric ternary derivatives of the body-centered α-ThSi₂-type; (2) the late rare-earths (R=Tb, Dy, Ho, Er, Tm) form stoichiometric R₂Al₃Si₂ compounds that crystallize in the C-centered monoclinic Y₂Al₃Si₂-type; (3) the divalent Eu and Yb produce EuAl₂Si₂ and YbAl₂Si₂ with the trigonal CaAl₂Si₂-type, whereas the last lanthanide element, Lu, forms LuAlSi with C-centered orthorhombic YAlGe-type. These structural trends are reviewed, and the evolution of the basic physical properties such as magnetism, heat capacity and electrical resistivity when moving across the series is described in detail.     

REAuAl4Ge2 and REAuAl4(AuxGe1−x)2 (RE=rare earth element): Quaternary intermetallics grown in liquid aluminum

The two families of intermetallic phases REAuAl₄Ge₂ (1) (RE=Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Er, Tm and Yb) and REAuAl₄(Au_xGe_1−x)₂ (2) (x=0.4) (RE=Ce and Eu) were obtained by the reactive combination of RE, Au and Ge in liquid aluminum. The structure of (1) adopts the space group R-3m (CeAuAl₄Ge₂, , ; NdAuAl₄Ge₂, , ; GdAuAl₄Ge₂, , ; ErAuAl₄Ge₂, , ). The structure of (2) adopts the tetragonal space group P4/mmm with lattice parameters: , for EuAuAl₄(Au_xGe_1−x)₂ (x=0.4). Both structure types present slabs of “AuAl₄Ge₂” or “AuAl₄(Au_xGe_1−x)₂” stacking along the c-axis with layers of RE atoms in between. Magnetic susceptibility measurements indicate that the RE atoms (except for Ce and Eu) possess magnetic moments consistent with +3 species. The Ce atoms in CeAuAl₄Ge₂ and CeAuAl₄(Au_xGe_1−x)₂ (x=0.4) appear to be in a mixed +3/+4 valence state; DyAuAl₄Ge₂ undergoes an antiferromagnetic transition at 11 K and below this temperature exhibits metamagnetic behavior. The Eu atoms in EuAuAl₄(Au_xGe_1−x)₂ (x=0.4) appear to be in a 2+ oxidation state.     

Mixed-metal flux synthesis of quaternary RMn2TrxZn20−x compounds with Tr=Al, In

Eighteen new intermetallic compounds RMn₂Tr_xZn_20−x (2<x<7; R=rare-earth metal; Tr=Al, In) were synthesized using low-melting mixtures of (Tr/Zn) as a solvent. Structural refinement using single-crystal X-ray diffraction data shows that the compounds are substituted variants of the cubic CeCr₂Al₂₀-type structure (Fd-3m, Z=8; unit cell parameters vary from a=14.1152(3)Å for YbMn₂Al_5.3Zn_14.7 to a=14.8125(4)Å for SmMn₂In_5.9Zn_14.1). The Zn and Tr elements show site preferences in the indium compounds, but not in the aluminum analogs. The substitution of trielide element for zinc modifies the valence electron count of the compounds to allow for the incorporation of Mn into the structure. Magnetic susceptibility data show no evidence of magnetic ordering down to 3 K.     

Numerical simulation of DNA sample preconcentration in microdevice electrophoresis

A numerical model is presented for the accurate and efficient prediction of preconcentration and transport of DNA during sample introduction and injection in microcapillary electrophoresis. The model incorporates conservation laws for the different buffer ions, salt ions, and DNA sample, coupled through a Gaussian electric field to account for the field modifications that cause electromigration. The accuracy and efficiency required to capture the physics associated with such a complex transient problem are realized by the use of the finite element-flux corrected transport (FE-FCT) algorithm in two dimensions. The model has been employed for the prediction of DNA sample preconcentration and transport during electrophoresis in a double-T injector microdevice. To test its validity, the numerical results have been compared with the corresponding experimental data under similar conditions, and excellent agreement has been found. Finally, detailed results from a simulation of DNA sample preconcentration in electrophoretic microdevices are presented using as parameters the electric field strength and the other species concentrations. The effect of the Tris concentration on sample stacking is also investigated. These results demonstrate the great potential offered by the model for future optimization of such microchip devices with respect to significantly enhanced speed and resolution of sample separation.     

Determination of methylmercury fluxes across the air–water and air–soil interfaces by gas chromatography with electron capture detection

A method for the determination of methylmercury (MeHg) fluxes across the air–water and air–soil interfaces was developed using an in situ chamber. The MeHg in the air coming out of the chamber was captured by a column containing sulfhydryl cotton fiber adsorbent. MeHg was then desorbed from the column by using 2 mol L^–1 HCl. The MeHg in the effluent was extracted with benzene, and determined by gas chromatography with electron capture detection. Finally, the MeHg flux was calculated using the chamber. The method was applied to simulated experiments, and the results showed that the MeHg fluxes in the air–water system were higher than those in the air–soil–water system. The method was also successfully applied to the field measurements of an environment polluted by a chemical factory, and the results showed that the MeHg fluxes across the air–soil and air–water interfaces were 0.21–3.09 and 0.14–0.79 ng m^–2 h^–1, respectively. The method will be a useful tool in the environmental study of MeHg.     

Measurements Of Biogenic Hydrocarbons And Their Atmospheric Degradation In Forests

Abstract

An analytical procedure for the sampling and quantitative determination of biogenic hydrocarbons in the atmosphere is presented. The method is based on the adsorptive preconcentration of the hydrocarbons using Tenax TA/Carbopack B filled sampling tubes followed by thermodesorption of the trapped compounds and gas chromatographic analysis. To avoid losses of the biogenic alkenes as a consequence of their reaction with ozone on the adsorbents during the sampling step, an ozone scrubber is used in front of the adsorption tubes. Diurnal variations of the monoterpene- and ozone-concentrations are determined at different heights in and above a forest stand (coniferous and deciduous trees) in the Vosges (Col du Donon, 760 m a.s.l.) in order to elucidate the importance of terpene-oxidation reactions on the formation of peroxidic products in forest air.     

Single crystal synthesis and magnetism of the BaLn2O4 family (Ln = lanthanide)

The series of compounds in the BaLn₂O₄ family (Ln = La–Lu, Y) has been synthesized for the first time in single crystalline form, using a molten metal flux. The series crystallizes in the CaV₂O₄ structure type with primitive orthorhombic symmetry (space group Pnma, #62), and a complete structural study of atomic positions, bonds, angles, and distortions across the lanthanide series is presented. With the exception of the Y, La, Eu, and Lu members, magnetic susceptibility measurements were performed between 2 K and 300 K. BaCe₂O₄ and BaYb₂O₄ display large crystal fields effects and suppression of magnetic ordering. All compounds show signs of magnetic frustration due to the trigonal arrangements of the trivalent lanthanide cations in the structure.     

Synthesis and performance characterization of PS-PPEES nanoporous membranes with nonwoven porous support

The present work describes about the synthesis and characterization of Polysulfone blend nanoporous membrane with nonwoven support. This Nonwoven support provides mechanical strength to membrane while filtration process and minimizes membrane fouling. Hence it helps in better membrane performance in terms of salt rejection, improved flux, thermal stability and fairly increases in proton conductivity. In this work we have used K.C.270 nonwoven material consisting of fine polyester fibers and has a thickness of below 110 μm.     

Input,flux, and persistence of six select pesticides in San Francisco Bay

Temporal patterns of pesticide inputs to San Francisco Bay were identified and correlated with timing of application and transport mechanism. Fluxes were calculated from measured concentrations and estimated flow. Persistence of the pesticides under typical riverine or estuarine conditions were estimated from laboratory experiments. Simazine was detected most frequently and had the highest flux into the Bay, which could be explained by its continuous use and long half-life. In comparison, diazinon was detected at lower concentrations and had a lower flux which corresponded to its lower use and shorter half-life. The order-of-magnitude lower fluxes of carbofuran and methidathion corresponded to their lower use and expected hydrolysis. Molinate was detected at the highest concentration but its flux was lower than expected, considering its very high use and persistence in the laboratory experiments. Additional loss of molinate is likely to occur from volatilization and photodegradation on the rice fields. Although thiobencarb had the second highest use, it had the lowest flux of the six pesticides, which can be attributed to its loss via hydrolysis, photodegradation, volatilization, and sorption to sediments. Fluxes into San Francisco Bay were equal to or greater than those reported for other estuaries, except for the Gulf of Mexico.