用等厚干涉测定液体折射率

介绍一种采用等厚干涉原理测定液体折射率的简单可靠的方法。     

Condensation film on an inclined rotating disk

The three dimensional problem of steady fluid deposition on an inclined rotating disk is solved by similarity transform. For a given spraying rate there may be one, two or no steady state solution. The inclination causes a downward draining flow and a lateral flow. Perturbation solutions compare well with exact similarity solutions when the fluid film is thin.     

摄像型等厚干涉实验仪器的研究

介绍了“摄像型等厚干涉实验仪”的构造及等厚干涉实验新的测量方法。     

用^60Co放射源检测油垢厚度的初步实验研究

本文用石蜡模拟油垢，用^60Co放射源的1．25MeV平均能量的γ射线垂直入射，以一定的散射角和不同的探测立体角接收散射γ光子敫．发现散射γ计数与被测石蜡厚度之间存在不同的线性关系．结果发现，放射源与探测器之间屏蔽的好坏和合理的探测距离对提高线性度有很大关系．本实验测得最佳线性相关系数平方值为0．9981，平均测量精度为1．26mm．这对研究散射法检测油垢厚度和选择合适的探测距离提供了实验基础．     

ICP-AES测定彩涂前处理表面调整转化层中Ti、Ni含量及钝化膜中Cr含量

采用电感耦合等离子体-原子发射光谱法同时测定彩涂前处理表面调整转化层中Ti、Ni含量及钝化膜中Cr含量.以表征表面调整转化层厚度及钝化膜厚度,采用本方法准确度高、快速简便,经试验结果令人满意.     

The effect of microscopic features upon the transmissivity of enclosed laser ablated laminated metallised polymer films

A vacuum-deposited aluminium layer (20 nm) is sandwiched between two layers of laminated oriented polypropylene (OPP) film whose thickness varies from 20 to 40 μm. Selected areas of this sealed system were transparentised by the redistribution of the aluminium layer without breaking the seal or causing damage to the OPP film using a 75 W Q-switched Nd:YAG laser. The resultant transparentised films contain aluminium particles, distorted polymer areas and intact areas of the vacuum-coated aluminium layer. This paper investigates the effect of microscopic features upon the overall transmissivity of the laser-treated films and hence the quality of the transparentisation process.     

甲基红染料掺杂的聚乙烯醇薄膜光存储特性的实验研究

用2倍频小型YAG激光(532nm)作为写入光和擦除光,用He-Ne激光器623.8nm线作为读出光,用CCD作为探测器,研究了不同写入光功率下,甲基红/聚乙烯醇(MR/PVA)薄膜光栅生长的动力学过程和不同擦除光功率下,光栅擦除的动力学过程.结合光栅生长曲线的波动现象,对光存储机制进行了新的探讨.实验发现,两写入光和读出光的功率配比为1:1:1时,可获得最大衍射效率,提出读出光对写入过程具有双重作用的物理模型,对此实验结果给出了合理的解释.     

不锈钢丝网上薄膜TiO2光催化剂的Raman光谱研究

用Raman光谱方法来研究用Sol Gel法负载于金属丝网的薄膜TiO2 光催化剂的物相结构、厚度以及粒径大小。研究结果显示 ,薄膜达到一定厚度能够阻止基底Fe元素向薄膜表层的扩散 ;在 4 0 0℃下灼烧制得的薄膜TiO2 光催化剂具有锐钛矿晶型 ,而高于 4 0 0℃时 ,将出现金红石相TiO2 ;锐钛矿晶型TiO2 的Raman特征峰产生偏移 ,表明薄膜粒径的变化 ,通过计算表明 ,薄膜TiO2 的粒径为 10nm左右 ,TEM的分析结果也与之一致。     

Atomistic phenomena in dense fluid shock waves

The shock structure problem is one of the classical problems of fluid mechanics and at least for non-reacting dilute gases it has been considered essentially solved. Here we present a few recent findings, to show that this is not the case. There are still new physical effects to be discovered provided that the numerical technique is general enough to not rule them out a priori. While the results have been obtained for dense fluids, some of the effects might also be observable for shocks in dilute gases.     

Phase Measurement Algorithm in Wavelength Scanned Fizeau Interferometer

Wavelength scanned interferometry allows the simultaneous measurement of top surface shape and optical thickness variation of a transparent object consisting of several parallel surfaces. Interference signals from these surfaces can be separated in frequency space, and their phases are detected by discrete Fourier analysis. However, these signal frequencies are shifted from the detection frequency by the refractive index dispersion of the object and a nonlinearity of the wavelength scanning. The Fourier analysis is sensitive to the detuning of the signal frequency and suffers from the multiple-beam interference noise. Conventional error-compensating algorithms cannot be applied to an object consisting of more than three reflecting surfaces. We derive a new 2N-1 sample error-compensating algorithm, which allows the phase detection of any order of harmonic frequency among the interference signals. The new algorithm suppresses the effect of signal frequency detuning as well as the multiple-beam interference noise and can be applied to the measurement of complex objects consisting of more than three reflecting surfaces.