Viscoelastic behavior of polypropylene/nitrile rubber thermoplastic elastomer blends: Application of Kerner's models for reactively compatibilized and dynamically vulcanized systems

The viscoelastic properties of binary blends of nitrile rubber (NBR) and isotactic polypropylene (PP) of different compositions have been calculated with mean‐field theories developed by Kerner. The phase morphology and geometry have been assumed, and experimental data for the component polymers over a wide temperature range have been used. Hashin's elastic–viscoelastic analogy principle is used in applying Kerner's theory of elastic systems for viscoelastic materials, namely, polymer blends. The two theoretical models used are the discrete particle model (which assumes one component as dispersed inclusions in the matrix of the other) and the polyaggregate model (in which no matrix phase but a cocontinuous structure of the two is postulated). A solution method for the coupled equations of the polyaggregate model, considering Poisson's ratio as a complex parameter, is deduced. The viscoelastic properties are determined in terms of the small‐strain dynamic storage modulus and loss tangent with a Rheovibron DDV viscoelastometer for the blends and the component polymers. Theoretical calculations are compared with the experimental small‐strain dynamic mechanical properties of the blends and their morphological characterizations. Predictions are also compared with the experimental mechanical properties of compatibilized and dynamically cured 70/30 PP/NBR blends. The results computed with the discrete particle model with PP as the matrix compare well with the experimental results for 30/70, 70/30, and 50/50 PP/NBR blends. For 70/30 and 50/50 blends, these predictions are supported by scanning electron microscopy (SEM) investigations. However, for 30/70 blends, the predictions are not in agreement with SEM results, which reveal a cocontinuous blend of the two. Predictions of the discrete particle model are poor with NBR as the matrix for all three volume fractions. A closer agreement of the predicted results for a 70/30 PP/NBR blend and the properties of a 1% maleic anhydride modified PP or 3% phenolic‐modified PP compatibilized 70/30 PP/NBR blend in the lower temperature zone has been observed. This may be explained by improved interfacial adhesion and stable phase morphology. A mixed‐cure dynamically vulcanized system gave a better agreement with the predictions with PP as the matrix than the peroxide, sulfur, and unvulcanized systems. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1417–1432, 2004     

Arenesulfonylimines of methyl trifluoropyruvate in the cyclocondensation reactions with 1,3-C,N-and-N,N-binucleophiles

Reaction of arenesulfonylimines of methyl trifluoropyruvate with 1,3-C,N-and-N,N-binucleophiles led to a variety of N-sulfonylated fluorine-containing heterocycles, including the fused ones. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2171–2175, November, 2007.     

Polymerization of vinyl acetate in fatty acids and properties of poly (vinyl alcohols) derived from the poly (vinyl acetates)

Polymerization of vinyl acetate (VAc) in various fatty acids (carbon numbers 4–18) was carried out. Chain transfer constants to the acids were determined to be 20–35×10^–4, from which the constant to a methylene group was obtained to be 0.73×10^–4. Viscometry in aqueous solution of derived poly (vinyl alcohol) (PVA) showed the usual behavior in terms of Huggins constant obtained by the Schulz–Blaschkes equation for PVAs derived from fatty acid systems lower than hexadecanoic acid. PVA derived from octadecanoic acid system showed abnormality, indicating association of alkyl groups. Contact angles on surfaces of PVAs cast from aqueous solutions were measured. While those of PVA derived from lower acid systems were 62°, those of PVAs derived from higher aids were higher and increased to 92° with increase in carbon number to octadecanoic acid. Alkyl groups in the PVAs were estimated to appear on the surfaces. Surface tension of aqueous solution of the PVA derived from octadecanoic acid showed high surface activity, and depended on pH of the solution, indicating the presence and cleavage of lactone ring at the combined portion between PVA and the acid.     

马齿苋及其籽中脂肪酸的比较研究

本实验利用ＧＣ－ＭＳ分析技术对马齿苋全草及其籽中的脂肪酸（以甲酯的形式）进行了分析，共鉴定出８种脂肪酸。全草中以亚麻酸（４７．１６％）、亚油酸（２２．００％）及棕榈酸（１７．４％）为主，籽中以亚油酸（４５．８６％）及亚麻酸（３０．６１％）为主。     

GC/MS法分析奶油中的脂肪酸

利用气相色谱/质谱/计算机联用技术分析人造奶油、天然奶油和新西兰奶油中的脂肪酸,从中鉴定出7种酸:棕榈酸、棕榈油酸、硬脂酸、油酸、亚油酸、亚麻油酸及花生酸。人造奶油含亚油酸比天然奶油含的高。     

橡胶增韧环氧树脂机理的研究

本文研究了固化剂种类、环氧基体平均网链长度和分散相与基体间键合情况对体系韧性等的影响.结果说明,基体平均网链长度是一个更为重要的影响因素.分散相与基体间的化学键合也是重要的.文中对橡胶增韧环氧树脂的机理提出了见解.在交联密度较低的材料中,在橡胶颗粒附近叠加的应力场诱发下发生纵深度较大的断裂过程.分散相与基体间的化学键合增大该应力场强度有利于加大断裂过程区.     

Biocatalytic Synthesis of Highly Enantiopure 1,4-Benzodioxane-2-carboxylic Acid and Amide

Catalyzed by Rhodococcus erythropolis AJ270, a nitrile hydratase and amidase containing microbial whole-cell catalyst, at 10 ℃ and with the use of methanol as a co-solvent, nitrile and amide biotransformations produce 2S-1,4-benzodioxane-2-carboxamide and 2R-1,4-benzodioxane-2-carboxylic acid in high yields with excellent enantioselectivity.     

Chemical composition of “AKD vapour” and its implication to AKD vapour sizing

Alkyl ketene dimer (AKD) sizing of paper involves the redistribution of the wax over the fibre surface upon heating. The two major mechanisms widely studied so far are the spreading of an autophobic precursor of molten AKD and AKD vapour transport and re-deposition on the fibre surface. All previous work assumed that the transport of AKD vapour could be expressed by the change of water contact angle with substrates that were exposed to the vapour. Information regarding the chemical composition of the vapour phase above the AKD wax has not been found in the literature. In this work, a simple method for analysing the chemical composition of the vapour is established. Our preliminary results indicated that the chemical composition of AKD vapour in the temperature range of 75–80 °C is dominantly fatty acids. This suggests that the sizing effect by actual AKD molecules via the vapour deposition mechanism is likely to be insignificant in this temperature range. This also implies that fatty acids play a positive role in AKD sizing. The chemical stability of AKD in this temperature range is also studied.     

Catalytic Sandmeyer cyanation as a synthetic pathway to aryl nitriles

Aryl nitriles ArCN were obtained by the Cu(I)/Cu(II) catalysed reaction of aryl diazonium salts with KCN in good yields.     

Repeatability and pattern recognition of bacterial fatty acid profiles generated by direct mass spectrometric analysis of in situ thermal hydrolysis/methylation of whole cells

Direct CI mass spectrometry profiling of fatty acid methyl esters (FAMEs) from in situ thermal hydrolysis/methylation (THM) of whole bacterial cells with tetramethylammonium hydroxide (TMAH) has been demonstrated as a potential method for real time and fieldable detection/identification of microorganisms. Bacillus anthracis (Ames), Yersinia pestis (Nair. Kenya), Vibrio cholerae (E1 Tor), Brucella melitensis (Abortus wild) and Francisella tularensis (LVS vaccine) were profiled by this method during a 10-month period. Repeatability of the in situ FAME data was calculated using one-way analysis of variance (ANOVA) and a t-test. Artificial neural network (ANN) and multivariate statistics of the FAME profiles were also compared for bacterial identification/classification. Equivalent results were obtained with a multivariate rule building expert system (MuRES) and the ANN. However, the ANN analysis required much less computer time and was deemed the best choice for this application. In situ THM FAME profiles of the bacterial samples provided comparable results with those obtained from the Microbial Identification System (MIDI) (Newark, DE) wet chemistry-gas chromatographic based system.