Determination of residual monomers in acrylate dispersions by gas chromatography

The content of residual monomers is one of the most important characteristics of polymer dispersions. As a result of the similar physicochemical parameters of ethyl acrylate and methyl methacrylate, it is very difficult to determine the residual monomers in acrylate dispersions obtained by emulsion polymerization of both monomers. Gas chromatography with capillary columns, however, permits separation of these monomers and their quantitative determination in acrylate dispersions.     

乳液聚合阶段Ⅱ动力学研究的进展

本文简述了乳浓聚合动力学研究的进展,着重于澳大利亚Sydney大学Gilbert等在乳液聚合阶段Ⅱ动力学方面的研究概况。介绍了不同水溶性单体的小尺寸种子乳液体系的SmithEwart递推方程的求解方法及其解析解形式和乳液聚合动力学数据的处理。同时讨论了该研究的局限性。     

乳液聚合法制备水分散有机硅聚合物

乳液聚合法是制备水性有机硅聚合物的最有效、最常用的方法。本文从乳液聚合所采用的有机硅单体或预聚物、乳液聚合工艺、乳液体系的稳定性等方面，论述了采用乳液聚合法合成水性有机硅聚合物领域所面临的问题及所取得的研究进展。     

Evaporation behavior of water from aqueous dispersions of multihollow particles prepared by the stepwise alkali/acid method

In order to clarify the formation mechanism of multihollow structures inside styrene–methacrylic acid copolymer particles prepared by the stepwise alkali/acid method, which we proposed in 1990, the evaporation behavior of water from aqueous dispersions of the original carboxylated particles and those after the alkali treatment and the stepwise alkali/acid treatments was examined. It is concluded that the particle after the alkali treatment had a number of small water pools inside. Received: 22 February 2001 Accepted: 20 June 2001     

乳液聚合共聚物玻璃化转变温度及其理论计算

从共聚单体的竞聚率、油相水相分布系数出发,通过动力学模拟计算了丙烯酸丁酯与醋酸乙烯酯乳液共聚物的链结构,并用Johnson公式对其玻璃化转变温度(T_g)进行了理论计算,给出了共聚物T_g及其对应聚合物的重量分布图。发现半连续共聚物有1个T_g,其值随共聚物组成而变化;但一步法共聚物有两个T_g:低温区T_g代表富丙烯酸丁酯共聚物,高温区T_g则代表PVA均聚物。计算结果与实验十分吻合。     

Influence of nonionic emulsifier included inside carboxylated polymer particles on the formation of multihollow structure by the alkali/cooling method

The influence of nonionic emulsifier, included inside styrene-methacrylic acid copolymer [P(S-MAA)] particles during emulsion copolymerization, on the formation of multihollow structure inside the particles via the alkali/cooling method (proposed by the authors) was examined in comparison to emulsifier-free particles. It was clarified that the nonionic emulsifier included inside the P(S-MAA) particles eased the formation of multihollow structure.Part CCL of the series studies on suspension and emulsion     

团聚纳米SiO_2在苯乙烯乳液聚合过程中的再分散过程及机理

用二氧化硅 (SiO2 )存在下的乳液聚合法制备了聚苯乙烯 (PSt) 纳米SiO2 复合材料 ,研究了苯乙烯(St)乳液聚合过程中团聚纳米SiO2 的解离与再分散过程及分散的机理 .发现商品纳米SiO2 粒子以团聚体形式存在 ,团聚体大小远超出纳米级范围 .随聚合时间的延长 ,St的转化率逐渐增加 ,而PSt SiO2 复合微胶囊的粒径逐渐减小 ,反应 12 0min后 ,转化率和复合微胶囊粒子的粒径趋于稳定 .透射电镜 (TEM)也显示PSt SiO2 复合微胶囊粒子具有海岛结构 ,而SiO2 粒子的粒径在纳米范围内 ,表明在乳液聚合过程中SiO2 团聚体被逐渐解离 ,并重新分散到纳米尺度 .红外光谱研究发现 ,在乳液聚合过程中 ,除生成PSt均聚物外 ,还在纳米SiO2 表面生成了PSt接枝共聚物 ,改善了无机纳米粒子与聚合物之间的界面相容性 .聚合过程中的反应热和剪切搅拌是团聚体被解离和重新分散的主要原因 ,而生成的聚合物起到隔离作用     

An NMR study of the species produced by the reactions of dialkyl magnesium and HCl with calcined silica and the polymerisation performance of Ziegler-Natta catalysts produced from this support material

The effect of calcinations on the silica surface groups and thereby on the activity of Ziegler-Natta catalysts in ethylene homopolymerisation has been studied. Silica was calcined at different temperatures and treated with MgR₂ and HCl. Silica surface groups were identified by using ¹H MAS NMR and ¹³C and ²⁹Si CP MAS NMR techniques. Magnesium, titanium and chlorine were measured by elemental analysis. Ziegler-Natta catalysts were prepared from these supports and subsequently used in ethylene homopolymerisation. Maximum activity was obtained with the catalyst based on 590 °C calcined silica. The results indicate that MgR₂ reacts with siloxane-groups (Si-O-Si) in the 300 °C calcined silica, leaving the hydrogen-bonded hydroxyl-groups unreacted. Low activity Si-O-Ti(Cl)₂-O-Si species are formed after reacting with TiCl₄. The higher activity in the catalyst based on 590 °C calcined silica can be explained by the formation of -Si(R)-O-Si-O-TiCl₃ groups, originating from the siloxane bridges which cannot form in 300 °C calcined silica. Other explanations for the higher activity are a higher Mg/Ti ratio or small amounts of crystal water formed in the 590 °C calcined silica.     

Cationic amino-containing N-isopropyl- acrylamide–styrene copolymer latex particles: 1-Particle size and morphology vs. polymerization process

 Cationic hydrophilic copolymer latexes were synthesized at 70 °C either by batch or two-step emulsifier-free emulsion poly-merization of styrene (St), N-iso-propylacrylamide (NIPAM), and aminoethylmethacrylate hydro-chloride (AEM) using 2,2′-azobis (2-amidinopropane) dihydrochloride as initiator. At first, batch polymerization kinetics were followed by gas chromatography (GC), revealing that NIPAM rapidly homopolymerized, before the polymerization of styrene had started. Particle size analysis by quasi-elastic light scattering (QELS) and transmission electron microscopy (TEM) showed that monodispersed particles were obtained with the formation of a poly[NIPAM] rich shell. Adding a small amount of the cationic monomer caused a strong decrease of the particle size without affecting the size monodispersity. When a shot process was used, a narrow particle size distribution was maintained, provided that the monomer addition was performed at a relatively high conversion of the first batch step. The poly[NIPAM] rich shell layer was larger with the shot process, but increasing the amino-containing monomer in the recipe resulted in a dramatic decrease of the thickness. Combination of transmission, scanning and atomic force microscopy techniques showed that these hydrophilic particles exhibited odd-shaped structures, the unevenness being dependent upon the performed process. Kinetic data and particle morphology information were inferred for discussion of the polymerization mechanism of this system. Received: 21 August 1997 Accepted: 22 October 1997     

New divalent samarocenes for butadiene polymerisation: influence of the steric effect and the electron density on the catalytic activity

Two new divalent samarocenes, Cp^*′₂Sm(THF) (1) and (Cp^Ph3)₂Sm(THF) (2) (Cp^*′=C₅Me₄ⁿPr, Cp^Ph3=H₂C₅Ph₃-1,2,4), were synthesized and characterized by ¹H NMR and elemental analysis. The activity of 1 and 2 as butadiene polymerisation catalysts was studied, in the presence of MAO and MMAO, and compared to this of Cp^*₂Sm(THF)₂ (3) and (Cp⁴ⁱ)₂Sm (4) (Cp^*=C₅Me₅, Cp⁴ⁱ=C₅HⁱPr₄), in the same conditions. The 1/MAO system presents the highest activity. The less active 2/MAO system leads to a high cis-1,4 regular structure up to 97%. The MMAO cocatalyst is found very sensitive to the steric hindrance of the samarocenes: the activity decreases from 1/MAO to 1/MMAO, and no activity is observed in the case of complexes 2 and 4, associated to MMAO. Complexes 1 and 2 can be both oxidized with AlMe₃ to give the corresponding Sm/Al bimetallics and , respectively.