Electroanalytical and chromatographic determination of pentachlorophenol and related molecules in a contaminated soil: a real case example

Electroanalytical and chromatographic methodologies have been applied for the determination of pentachlorophenol (PCP) and some of its derivatives in real soil samples contaminated by industrial discharge. The analytes were extracted with hexane from soil samples collected at different points of the site and mixed to produce a representative sample. Square wave voltammetry (SWV) experiments were carried out on either a boron-doped diamond (BDD) electrode or a gold ultramicroelectrode (Au-UME) in an analyte composed by the Britton-Robinson (B-R) buffer at pH 5.5 with the direct addition of proper amounts of the extract. The voltammetric responses revealed an irreversible anodic peak at approximately 0.80 V vs. Ag/AgCl with a peak current showing a linear dependence on PCP concentration. This linear relationship yielded a detection limit (DL) of 2×10⁻⁸ mol l⁻¹ (or 5.5 μg l⁻¹) for the BDD electrode and 6.9×10⁻⁸ mol l⁻¹ (18.4 μg l⁻¹) for the Au-UME, while the independently measured HPLC detection limit was 1.1×10⁻⁸ mol l⁻¹ (3.0 μg l⁻¹). The application of electroanalytical and chromatographic methodologies in the analysis of soil extracts revealed, besides the PCP responses, signals for some related molecules such as o-tetrachlorobenzoquinone (o-chloranil), hexachlorobenzene and tetrachlorophenol. Recovering experiments for PCP showed a concentration of 27.5 mg kg⁻¹ for the electroanalytical determinations and 26.8 mg kg⁻¹ for the HPLC analysis, values exceedingly high if considering that the maximum residue limit established for natural waters by the Brazilian Environmental Agency is 10 μg l⁻¹.     

化学计量学在有机物电分析化学中的应用

化学计量学在有机物电分析化学中的应用日益广泛，并发挥重要的作用。本文就化学计量学方法在色素、抗氧化剂、维生素、氨基酸、环境污染物、农药及药物等电分析化学方面的应用作一综述。引用参考文献58篇。     

Electrocatalytic Properties of a Novel Poly‐1‐Naphthylamine‐Modified Electrode Using Ascorbic Acid as Molecule Probe

A glassy carbon electrode was modified with an electropolymerized film of 1‐naphthylamine in aqueous solution. The electrocatalytic properties of this modified electrode (ME) were investigated using ascorbic acid (AA) as probe molecule. The electrochemical behavior of AA in buffer solution was examined by voltammetry and amperometry. The results showed that the ME exhibited good electrocatalytic activity towards the oxidation of AA, as a consequence, it can be used as amperometric sensor of this analyte in a flow injection system with good sensitivity. Calibration curves were linear over the concentration range 0.05–1.50 mM with a phosphate buffer solution pH 3 as the carrier, the detection limit was 1 ppm (S/N=3). The methods were applied to the determination of AA in beverages and pharmaceutical products. A good correlation with a reference method was attained.     

Study on electrochemical behavior of tryptophan at a glassy carbon electrode modified with multi-walled carbon nanotubes embedded cerium hexacyanoferrate

Electrochemical behavior of cerium hexacyanoferrate (CeHCF) incorporated on multi-walled carbon nanotubes (MWNTs) modified GC electrode is investigated by scanning electron microscopy (SEM) and electrochemical techniques. The CeHCF/MWNT/GC electrode showed potent electrocatalytic activity toward the electrochemical oxidation of tryptophan in phosphate buffer solution (pH 7.0) with a diminution of the overpotential of 240 mV. The anodic peak currents increased linearly with the concentration of tryptophan in the range of 2.0 × 10⁻⁷ to 1.0 × 10⁻⁴ M with a detection limit of 2.0 × 10⁻⁸ M (at a S/N = 3). And the determination of tryptophan in pharmaceutical samples was satisfactory.     

The Electrochemical Detection of Arsenic(III) at a Silver Electrode

A study of three electrode substrates namely gold, platinum and silver, for arsenic detection via anodic stripping voltammetry is reported. Hitherto it has been accepted that gold is the most suitable metallic surface for use in this context, as suggested by Forsberg and co‐workers (Forsberg, G.; O'Laughlin, J. W.; Megargle, R. G. Anal. Chem. 1975, 47, 1586.). We revisit these experiments and find that by switching from hydrochloric acid to nitric acid the oxidation of silver that had previously masked the arsenic stripping signal at this surface is shifted considerably enough to allow a clear, analytically reliable As(III) stripping signal to be detected. In contrast to silver and gold platinum is found to have poor performance as an electrode substrate for arsenic detection. Using ASV a LOD of 6.3×10^?7 M is found for As(III) detection at a silver electrode, similar to that which we have previously reported at a gold electrode (A. O. Simm, C. E. Banks and R. G. Compton. Electroanalysis, 2005, 17, 335.) The use of ultrasound was then investigated to further reduce the LOD, which was found to be 1.4×10^?8 M. Apart from reduced cost of silver it also has an added advantage over gold in that it has a higher hydrogen reduction overvoltage enabling a 100 mV more negative deposition potential to be used before the onset of hydrogen evolution when compared to a gold electrode.     

Cobalt Phthalocyanine‐Based Molecular Materials for the Electrocatalysis and Electroanalysis of 2‐Mercaptoethanol, 2‐Mercaptoethanesulfonic Acid,Reduced Glutathione and L‐Cysteine

We have investigated the electrocatalytic activity of cobalt tetra‐aminophthalocyanine (CoTAPc) for the one‐electron oxidation of thiols of various sizes, namely 2‐mercaptoethanol, 2‐mercaptoethanesulfonic acid, reduced glutathione and L ‐cysteine, using adsorbed monomeric CoTAPc and electropolymerized poly‐CoTAPc films of different thickness on a vitreous carbon electrode. Our results show that the electrocatalytic activity of poly‐CoTAPc films towards the oxidation of the thiols increases slightly with the thickness of the film, but remains similar to that of the adsorbed monomeric CoTAPc. The higher stability of the electropolymerized poly‐CoTAPc films makes them attractive for applications in the activation and/or the detection of thiols. We have assessed this approach by designing ultra‐micro‐carbon‐fiber electrodes, coated with poly‐CoTAPc, and combining their use with different electrochemical techniques (cyclic voltammetry, differential pulse voltammetry and differential normal pulse amperometry) for the electroanalysis of the examined thiols.     

A Non‐Enzymatic Carbohydrate Sensor Based on Multiwalled Carbon Nanotubes Modified with Adsorbed Active Gold Particles

The voltammetric behavior of a glassy carbon electrode modified with multiwalled carbon nanotubes (MWCNTs) and Au particles was studied in alkaline medium towards the electrooxidation of some carbohydrates used as model compounds. The influence of carbohydrate concentration and scan rate on peak potentials, peak currents, etc., observed at the modified electrode was evaluated and critically discussed. The Au particles dispersed into multiwalled carbon nanotubes structures showed favorable electrocatalytic and analytical properties towards the electrooxidation of xylose and glucose molecules. Atomic force microscopy performed on the resulting modified electrode showed a well‐efficient 3D distribution of Au active particles having sharp‐edged and elongated grains along bundles of the MWCNTs. The three‐dimensional MWCNT‐Au composite structure of the catalyst act as a promoter to enhance the diffusive character of recorded currents and probably also increases the rate of the heterogeneous electron transfer of the electrooxidation process considered.     

pH electrodes based on iridium oxide films for marine monitoring

The pH is an important parameter that affects the growth and development of marine organisms, environmental changes, and industrial and agricultural production processes. Nowadays, important trends in pH detection and analysis are higher stability, adaptation to extreme environmental conditions, miniaturization, portability, and digital intelligence. Several studies have focused on the application of the iridium oxide film (IROF) pH electrodes in water quality monitoring and physiological analysis. The central aim of this work was to review the preparation techniques of the IROF pH electrodes and to expand their application in the field of marine monitoring. The studied methods include electrochemical deposition, electrochemical growth, sputtering deposition, heat treatment, and novel preparation methods. The IROF pH electrodes prepared via these methods are more sensitive, have a wider pH measurement ranges, and can be miniaturized further than traditional glass and pH photometer. Hence, in environmental analysis, combining IROF pH electrodes with wireless technology for the physiological and biochemical analysis of marine organisms, seawater, and sediment pore water is an important development tendency.     

库仑—新极谱电分析法

恒电流库仑滴定时无论用电位法或是用电流法指示终点,恒电流都会影响指示信号的观测;用新极谱分析法指示恒电流库仑滴定终点,同样受恒电流干扰,为了判断滴定终点,需多次断电停止滴定,观测峰高。本文提出根据两次间隔滴定观测到的峰高获得分析结果的方法。