Voltammetric study of the behaviour of N-acetyl-p-aminophenol in aqueous solutions at a platinum electrode

The electrochemical oxidation of N-acetyl-p-aminophenol (PAR) was investigated at a Pt electrode with the application of cyclic (CV) and differential pulse (DPV) voltammetry methods. An effect of scan rate, substrate concentration and pH on electrode reactions was determined. The parameters of substrate electro-oxidation, i.e. heterogeneous rate constant, charge transfer coefficient, and diffusion coefficient, were calculated. Our investigation's results prove the exchange of two electrons and one proton in the first step, followed by a chemical reaction. PAR electro-oxidation occurs according to an EC mechanism.     

Investigation of the electrocatalytic oxidation of formate and ethanol at platinum black under microbial fuel cell conditions

In this communication, we discuss the electro-oxidation of the fermentation products formate and ethanol at platinum black modified electrodes under microbial fuel cell conditions, i.e., at neutral pH, room temperature, and in microbial culture solutions. The electrocatalytic oxidation was studied using cyclic voltammetry, chronoamperometry, and potentiostatic coulometry. Current densities up to 6 mA cm⁻² at 0.2 V oxidation potential and 97% coulombic efficiency were observed for the electro-oxidation of 100 mM solutions of formate in pH 7 buffer solution. Electrode deactivation could be successfully prevented using an oxidative potential reactivation procedure. Polymer coating, however, fully stopped the formate oxidation. As expected, the electro-oxidation of ethanol was less efficient—with a limiting current density being 600 μA cm⁻².Dedicated to Professor Dr. Alan M. Bond on the occasion of this 60th birthday.     

Electrochemical technologies for treating petroleum industry wastewater

This review focuses on recent developments in electrochemical technology (with special emphasis on electrocoagulation, electro-oxidation, and electro-Fenton) to treat petroleum industry effluents (offshore and hydraulic fracturing extraction, as well as refinery effluents). In addition, an overview is given of what these processes face to position themselves as consolidated technologies.     

高铁酸盐在SnO2-Sb2O3/Ti电极上的选择性电化学合成

合成了SnO2-Sb2O3/Ti电极材料.实验结果证实,在14mol/LNaOH水溶液中和完全避免析氧反应的条件下,Fe(Ⅱ)物种在该电极上进行电化学氧化并生成FeO42-.结果表明,Fe(OH)3在浓NaOH溶液中发生酸式电离,形成可溶于水的FeO2-,该离子的浓度随着碱溶液浓度变化而发生明显变化,而且它还是发生化学氧化和电化学氧化的反应物.在SnO2-Sb2O3/Ti电极上,FeO42-的电化学还原起始电位为0.38V(vs.Hg/HgO,14mol/LNaOH),FeO2-电化学氧化起始电位为0.54V.结果还表明,用电化学方法氧化Fe(Ⅱ)物种生成FeO42-是个多步骤过程.     

用电化学方法氧化硫制备硫酸

粒状硫在阳极室内被电化学氧化得到硫酸。实验发现由疏转化为硫酸的量随电流密度的增加而增加，随硫床层厚度的降低而增加。用一定粒径的硫颗粒，生成的疏酸量最大。在电流密度为８４ｍＡ／ｃｍ￣２、粒径为７１０μｍ、硫床层厚度为１．１５ｍｍ时可得到硫酸的最大浓度为３５％，由硫转化为硫酸的能量消耗范围为０．５５～２．１ｋＷｈ／ｋｇ，具体数值与电流密度有关。     

The function of ruthenium oxides in Pt-Ru catalysts for methanol electro-oxidation at low temperatures

The electrocatalytic activities of different binary Pt-Ru(ox) catalysts have been investigated in half-cell experiments by cyclic voltammetry and stationary current–potential measurements. The materials have been prepared using a modification of the Adams method. X-ray analytical methods (X-ray diffraction, XRD, and energy dispersive X-ray spectroscopy, EDX) as well as thermogravimetric analysis (TGA) have been used to characterize the composition and the catalysts' content of the crystalline phases, and their surface areas have been determined by the BET method. It is found that the composition of the catalyst is strongly influenced by the synthesis temperature, which is varied between 400 and 600 °C. In contrast, the particle size of the metallic phases of the catalysts is not significantly affected for synthesis temperatures below 600 °C, as investigated by transmission electron microscopy. Synthesis temperatures of 500 °C favor the formation of crystalline RuO₂ phases, whereas at synthesis temperatures below 500 °C the presence of metallic alloy and of hydrous oxides was derived by the combined XRD and EDX measurements. The stationary current–potential curves show a correlation with the different synthesis temperatures. It can be concluded that both the presence of an alloyed metallic Pt-Ru phase as well as the presence of amorphous hydrated Ru oxides are favorable for the electrocatalytic oxidation of methanol.Dedicated to Prof. Wolf Vielstich on the occasion of his 80th birthday in recognition of his numerous contributions to interfacial electrochemistry     

Growth of Al2O3 thin films on NiAl(1 0 0) by gas-phase oxidation and electro-oxidation

The growth and structures of aluminum oxides on NiAl(1 0 0) have been investigated by RHEED (reflection high energy electron diffraction), complemented by LEED (low energy electron diffraction), AES (Auger electron spectroscopy) and STM (scanning tunneling microscopy). Crystalline θ-Al₂O₃ phase grows through gas-phase oxidation on the NiAl(1 0 0) substrate with its a and b-axes parallel to [0 −1 0] and [0 0 1] direction of the substrate, respectively, forming a (2 × 1) unit cell. Whilst, three-dimensional nano-sized NiAl(1 0 0) protrusions and Al₂O₃, NiAl(0 1 1) clusters were found to co-exit at the surface, evidenced by extraordinary transmission spots superposed to the substrate reflection rods in the RHEED patterns. Particularly, the NiAl(0 1 1) clusters develop with their (0 1 1) plane parallel to the NiAl(1 0 0) surface, and [1 0 0] axis parallel to the [0 −1 1] direction of the substrate surface. STM observation combined with information from AES and TPD (temperature programmed desorption) suggest the formation of these 3D structures is closely associated with partial decomposition of the crystalline oxides during annealing. On the other hand, smoother (2 × 1) oxide islands with thickness close to a complete monolayer of θ-Al₂O₃ can be formed on NiAl(1 0 0) by electro-oxidation, in contrast with the large crystalline films formed by gas-oxidation.     

Ti基纳米TiO_2-CNT-Pt复合电极制备、表征及电化学性能

以电合成前驱体Ti(OEt)4直接水解法和电化学扫描电沉积法制备Ti基纳米TiO2-CNT-Pt(Ti/nanoTiO2-CNT-Pt)复合电极.透射电镜(TEM)和X射线衍射(XRD)测试表明,锐钛矿型纳米TiO2粒子(粒径5～10nm)和碳纳米管(CNT)结合形成网状结构,Pt纳米粒子(平均粒径9nm)均匀地分散在纳米TiO2-CNT复合膜表面.循环伏安及计时电流测试表明,Ti/nanoTiO2-CNT-Pt复合电极具有高活性表面,对甲醇的电化学氧化具有高催化活性和稳定性,Pt载量为0.32mg/cm2时,常温常压下甲醇氧化峰电流达到480mA/cm2.     

Electro-oxidation of ethylene glycol on PtSn/C and PtSnNi/C electrocatalysts

A PtSn/C electrocatalyst with a Pt–Sn molar ratio of 50:50 and A PtSnNi/C electrocatalyst with a Pt–Sn–Ni molar ratio of 50:40:10 were prepared by alcohol-reduction process using ethylene glycol as solvent and reducing agent. The electrocatalysts were characterized by energy dispersive X-ray, X-ray diffraction, and cyclic voltammetry. The electro-oxidation of ethylene glycol was studied by cyclic voltammetry and chronoamperometry using the thin porous coating technique. PtSnNi/C electrocatalyst showed a superior performance compared to PtSn/C electrocatalysts in the potential range of interest for a direct ethylene glycol fuel cell.     

Electrochemical nitration of naphthalene in the presence of nitrite ion in aqueous non-ionic surfactant solutions

The nitration of naphthalene (NapH) at a Pt electrode in aqueous NaNO₂ solutions both in the absence and presence of a non-ionic surfactant, Brij®35 (polyoxyethylene (23) dodecanol), has been studied. The electrochemical behaviour of the reactants NapH and NaNO₂ and a mixture of the two was investigated by cyclic voltammetry (CV) to determine the optimal electrolysis conditions. The peak current of NapH decreases with increasing NaNO₂ concentration, indicating that the oxidation product of the NO₂⁻ ion interacts with the NapH radical cation (NapH⁺). Controlled potential electrolysis (CPE) was carried out and the products were analysed by HPLC. The main products detected in the micellar medium were 1-nitronaphthalene, 2-nitronaphthalene, 1,2-naphthoquinone, and 1,4-naphthoquinone. In the absence of Brij 35, the naphthoquinones were produced but no nitration products were obtained. In both cases, unknown products are inferred by mass balance, which are believed to be derived from the oxidation of 1,1′-binaphthyl (BinapH) formed by NapH⁺ coupling in both micellar and aqueous media. A mechanism of nitration by the attack of NO₂ to NapH⁺ is proposed. The higher selectivity for formation of 2-nitronaphthalene in comparison to non-aqueous homogeneous media is attributed to the effect of the micellar microenvironment.