Control of self‐organized low‐dimensional morphology in poly(styrene‐b‐4vinylpyridine)/polystyrene blend thin films

The surface morphologies of poly(styrene‐b‐4vinylpyridine) (PS‐b‐P4VP) diblock copolymer and homopolystyrene (hPS) binary blend thin films were investigated by atomic force microscopy as a function of total volume fraction of PS (?_PS) in the mixture. It was found that when hPS was added into symmetric PS‐b‐P4VP diblock copolymers, the surface morphology of this diblock copolymer was changed to a certain degree. With ?_PS increasing at first, hPS was solubilized into the corresponding domains of block copolymer and formed cylinders. Moreover, the more solubilized the hPS, the more cylinders exist. However, when the limit was reached, excessive hPS tended to separate from the domains independently instead of solubilizing into the corresponding domains any longer, that is, a macrophase separation occurred. A model describing transitions of these morphologies with an increase in ?_PS is proposed. The effect of composition on the phase morphology of blend films when graphite is used as a substrate is also investigated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3496–3504, 2004     

Formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber blends: Effects of preparation method,composition, and thermal condition

The effects of preparation method, composition, and thermal condition on formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber (iPP/EPR) blends were studied using modulated differential scanning calorimeter (MDSC), wide angle X‐ray diffraction (WAXD), and phase contrast microscopy (PCM). It was found that the α‐iPP and β‐iPP can simultaneity form in the melt‐blended samples, whereas only α‐iPP exists in the solution‐blended samples. The results show that the formation of β‐iPP in the melt‐blended samples is related to the crystallization temperature and the β‐iPP generally diminishes and finally vanishes when the crystallization temperature moves far from 125 °C. The phenomena that the lower critical temperature of β‐iPP in iPP/EPR obviously increases to 114 °C and the upper critical temperature decreases to 134 °C indicate the narrowing of temperature interval, facilitating the formation of β‐iPP in iPP/EPR. Furthermore, it was found that the amount of β‐iPP in melt‐blended iPP/EPR samples is dependent on the composition and the maximum amount of β‐iPP formed when the composition of iPP/EPR blends is 85:15 in weight. The results through examining the effect of annealing for iPP/EPR samples at melt state indicate that this annealing may eliminate the susceptibility to β‐crystallization of iPP. However, only α‐iPP can be observed in solution‐blended samples subjected to annealing for different time. The PCM images demonstrate that an obvious phase‐separation happens in both melt‐blended and solution‐blended iPP/EPR samples, implying that compared with the disperse degree of EPR in iPP, the preparation method plays a dominant role in formation of β‐iPP. It is suggested that the origin of formation of β‐iPP results from the thermomechanical history of the EPR component in iPP/EPR. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1704–1712, 2007     

弹性体共混改性聚丙烯的增韧机理

阐述了以聚丙烯（ＰＰ）／高密度聚乙烯（ＨＤＰＥ）为复合基体，苯乙烯－丁二烯－苯乙烯（ＳＢＳ）为增韧剂经三元共混所得的性能优异的一类新材料．从三个层次（形貌结构转变、宏观力学响应和裂尖过程区演化）系统地探讨了其增韧机理．结果表明由形貌结构控制和对早期体膨胀变形抑制可造成裂尖平面应变区的超钝化从而达到增韧．     

Stereoblock poly(lactic acid): synthesis via solid-state polycondensation of a stereocomplexed mixture of poly(L-lactic acid) and poly(D-lactic acid)

Stereoblock poly(lactic acid) consisting of D- and L-lactate stereosequences can be successfully synthesized by solid-state polycondensation of a 1:1 mixture of poly(L-lactic acid) and poly(D-lactic acid). In the first step, melt-polycondensation of L- and D-lactic acids is conducted to synthesize poly(L-lactic acid) and poly(D-lactic acid) with a medium-molecular-weight, respectively. In the next step, these poly(L-lactic acid) and poly(D-lactic acid) are melt-blended in 1:1 ratio to allow formation of their stereocomplex. In the last step, this melt-blend is subjected to solid-state polycondensation at temperature where the dehydrative condensation is allowed to promote chain extension in the amorphous phase with the stereocomplex crystals preserved. Finally, stereoblock poly(lactic acid) having high-molecular-weight is obtained. The stereoblock poly(lactic acid) synthesized by this way shows a higher melting temperature in consequence of the controlled block lengths and the resulting higher-molecular-weight. The product characterization as well as the optimization of the polymerization conditions is described. Changes in M(w) of stereoblock poly(lactic acid) (sb-PLA) as a function of the reaction time.     

聚癸二酸丙三醇酯对聚乳酸的改性

以丙三醇和癸二酸为单体通过熔融缩聚制得了聚癸二酸丙三醇酯(PGS),并用其预聚物(p-PGS)对聚L-丙交酯(PLLA)进行共混改性.利用傅立叶变换红外光谱(FT-IR)、核磁共振氢谱(1H-NMR)及凝胶渗透色谱(GPC)法对P-PGS的结构进行表征,并研究了改性后材料的力学性能、两相相容性、亲水性能和细胞相容性.结果表明:P-PGS具有支化分子结构,分散系数约为2.7;共混改性后的材料弹性模量和拉伸强度均有所下降,而断裂伸长率从7 %显著提高到150%左右;PLLA/PGS属于海岛式共混结构,PGS以小于10μm的尺寸均匀分布在PLLA基体中;共混后材料的亲水性也有一定的提高,且几乎保持了PLLA原有的细胞相容性.     

Modification of poly(propylene carbonate) with chain extender ADR-4368 to improve its thermal,barrier, and mechanical properties

Melt blending with the application of epoxy compound ADR-4368 as a chain extender was used to chemically modify polypropylene carbonate (PPC). ¹H nuclear magnetic resonance spectroscopy (¹H NMR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and tests using a universal material testing machine, a gas permeability tester, a water vapor permeability tester and other instruments were used to assess changes in the chemical structure, thermal and mechanical properties, and barrier efficacy of PPC before and after modification.The epoxy group in ADR-4368 reacted with the terminal hydroxyl group in PPC, considerably enhancing its mechanical properties, thermal stability and barrier efficacy to O₂ and CO₂. With the addition of 1% ADR-4368, the glass transition temperature of PPC was increased from 17 °C to 26.9 °C, while the thermal decomposition temperature (T_−5%) of PPC was increased from 177.3 °C to 240.6 °C. Moreover, the tensile strength of the modified PPC was improved from 3.3 MPa to 20.7 MPa.     

Antimicrobial Surgical Sutures: Recent Developments and Strategies

Surgical sutures are probably the most widely used medical devices in healthcare applications for wound closure. During their application, sutures may be exposed to microorganisms present in the environment leading to bacterial biofilm formation, and thereon to surgical site infections. The physicochemical characteristics of the polymeric substrate play a major role in directing the behavior of the suture in a biological milieu. In such a context, it is necessary to develop sutures which actively repel and inhibit bacterial adherence and colonization on their surfaces. Drug eluting sutures have been proposed as a solution to this dilemma. Currently, bioactive agents (natural or synthetic) are being incorporated in polymeric materials via various methods including blending and compounding, surface functionalization and conjugation, and coating to render antimicrobial surgical sutures. However, each of these methods has its own pros and cons. Depending upon the nature of the substrate, an appropriate processing technique has to be chosen. In this article, we review the recent state-of-the-art developments and strategies in antimicrobial surgical suture fabrication. The efficacy and mechanism of these sutures in controlling infection is critically analyzed. However, such bioactive agent incorporated sutures have to be tested in clinically randomized trials to accurately gauze their applicability in a surgical setting. Presently, very few antimicrobial surgical sutures are available commercially. Therefore, there is a great scope for market development in this area.     

CHARACTERIZATION OF MELT-MIXED POLY(ETHYLENE-2,6-NAPHTHALATE) (PEN)/POLYCARBONATE (PC) BLENDS

ABSTRACT

Melt blending of poly(ethylene naphthalate) (PEN) and bisphenol A polycarbonate (PC) was performed without the addition of catalyst in a batch mixer at 290°C at various compositions. All the blends prepared exhibited a biphasic character and had very good mechanical properties, in some cases, even better than those of the respective pure constituents. This behavior was attributed to a copolymer formation in the mesophase, which effectively compatibilizes the system. The formation of a PEN/PC block copolymer was considered to be due to transesterification reactions between PEN and PC and was verified by extraction experiments and examination of the soluble and insoluble fractions by various spectroscopic techniques.     

不同的灰熔点调控方式对煤灰熔融特性的影响

对两种原始煤灰进行混合,并分别搭配不同的添加剂,得到3种元素组成相同的煤灰,灰熔点测试结果显示,三者的灰熔点存在较大差异。结合X射线衍射技术和SEM-EDX(扫描电子显微镜与能谱联用)分析了3种煤灰(>800 ℃)在高温时的矿物质转化过程。结果表明,不同的灰熔点调控手段对不同煤的影响是不同的。原因是高温时矿物质组成不仅与煤灰化学元素组成相关,更与元素在矿物质中的赋存状态有关。两者共同决定了煤灰的熔融特性。