The Effects of Morphological Properties of Henequen Fiber Irradiated by EB on the Mechanical and Thermal Properties of Henequen Fiber/PP Composites

The aim of this study was to investigate the effects of electron beam (EB) irradiation on the morphological properties, crystallinity and surface area of henequen fiber and on the mechanical and thermal properties of henequen fiber reinforced polypropylene (PP) composites. The structure of henequen fiber was characterized by X-ray diffraction, mercury porosimetry and BET surface area analysis. The EB irradiation of 10 kGy led to the increasing of crystalline and surface pore area of henequen fiber, which contributed to the number of interlocking places with PP. From the results of tensile and impact strength tests, the highest value was observed for the composite reinforced with the henequen fiber treated with EB dose of 10 kGy, decreasing overall as EB dose increased. This tendency was also shown by coefficient of thermal expansion (CTE) measurements, but the value of CTE decreased until 50 kGy, meaning that a large total surface area can provide many interlocking places and so improve adhesion between fiber and matrix. Therefore, it can be concluded that the optimum pore surface area by 10 kGy irradiation contributes to successful mechanical interlocking between fiber and matrix and consequently enhances the mechanical and thermal properties of the composites.     

One-electron redox reactions of troxerutin in aqueous solutions

The oxidation of flavonoids is of great interest because of their action as antioxidants with the ability to scavenge radicals by means of electron-transfer processes. The redox reactions of the flavonoid derivative troxerutin, (2-[3,4-bis-(2-hydroxyethoxy) phenyl]-3[[6-deoxy-α-L-manno-pyranosyl)-β-(D-glucopyranosyl]-oxy]-5-hydroxy-7-(2-hydroxyethoxy)-4H-1-benzo-pyran-4-one), were investigated over a wide range of conditions, using pulse radiolysis and cyclic voltammetry. The oxidation mechanism proceeds in sequential steps. One-electron redox potentials for troxerutin were found to be +1.196, +0.846 and −0.634 V vs. NHE.     

Electron transfer (oxidation) of complexes between bifunctional phenols and DMSO in non-polar surroundings

Pulse-radiolysis reactions were performed to study the effect of hydrogen bonding to dimethyl sulfoxide (DMSO) on the oxidation of dihydroxy benzene and biphenyl diols to phenoxyl radicals. It was observed that with DMSO as the hydrogen-bond acceptor, the oxidation process proceeds via proton-coupled electron transfer in the case of hydroquinone. For resorcinol, DMSO acts in a similar way as in the case of hydroquinone. For other biphenols, viz., 2,2′- and 4,4′-biphenyl diols, it was found that DMSO had no effect on the electron transfer. The results are explained based on the ionization potential and structure of the phenol derivatives which probably depends on the rotation of the OH bond causing different electron distribution in the transient conformation.     

Henequen/poly(butylene succinate) biocomposites: electron beam irradiation effects on henequen fiber and the interfacial properties of biocomposites

Henequen natural fiber-reinforced poly(butylene succinate) biocomposites were prepared through a resin microdroplet formation on a single fiber and also fabricated by a compression molding technique using chopped henequen fibers, surface-treated with electron beam irradiation (EBI) at various dosages. The effect of EBI treatment on the surface characteristics and dynamic mechanical properties of henequen fibers was investigated using SEM, XPS and DMA methods, respectively. Also, the interfacial behavior of biocomposites was explored through a single fiber microbonding test and fracture surface observations. The result indicates that the interfacial shear strength (IFSS) of biocomposites greatly depends on the EBI treatment level on the henequen fiber surface. This study also suggests that appropriate modification of natural fiber surfaces at an optimum EBI dosage significantly contributes to improving the interfacial properties of biocomposites.     

Thermal behavior of chemically treated and untreated sisal fiber reinforced composites fabricated by resin transfer molding

Using thermogravimetric analysis (TGA), the thermal behavior of sisal fibers and sisal/polyester composites, fabricated by resin transfer molding (RTM), has been followed. Chemical treatments have been found to increase the thermal stability, which has been attributed to the resultant physical and chemical changes. Scanning electron microscopy (SEM) and infrared (FT-IR) studies were also performed to study the structural changes and morphology in the sisal fiber during the treatment. The kinetic studies of thermal degradation of untreated and treated sisal fibers have been performed using Broido method. In the composites, as the fiber content increases, the thermal stability of the matrix decreases. The treated fiber reinforced composites have been found to be thermally more stable than the untreated derivatives. The increased thermal stability and reduced moisture behavior of treated composites have been correlated with fiber/matrix adhesion.     

Characteristics of excited-state intermediates of TiO2–Y-Zeolite and MCM41 encapsulating photosensitive molecules: design of new photocatalysts

Some photosensitive molecules, such as p-N,N′-dimethylaminobenzoic acid (DMABA), Nile Red, heteropolytungstic acid (H₃PW₁₂O₄₀, HPA) and metalloporphyrins, have been entrapped onto nano-scale pores or channels of TiO₂-modified Y-Zeolite (TiO₂-Y-Zeolite) and MCM41 (TiO₂-MCM41) and their excited-state intermediates have been characterized in terms of the excited-state dynamics by using laser spectroscopic techniques. Through these studies, it has been found that the photo-induced electrons are generated from the intramolecular charge transfer (ICT) state of DMABA, Nile Red or metalloporphyrin (MnTPP(Cl)), followed by transferring to the TiO₂-Y-Zeolite or TiO₂-MCM41 more efficiently as compared to the bulk TiO₂, NaY-Zeolite or MCM41. The efficient photoinduced interfacial electron transfer causes the rapid formation of radicals of those photosensitive molecules (a few tens ps). It has been also found that these photophysical properties can be applied to develop the new photocatalyst as observed by the efficient photocatalytic activities of the DMABA or Nile Red-entrapped TiO₂-Y-Zeolites for the photoreduction of an azo-dye such as Methyl Orange in water. On the other hand, in case of HPA-entrapped TiO₂-Y-zeolite, the electron generated from the excited-state TiO₂ is transferred to HPA, followed by formation of the reduction product, heteropoly blue (HPB) which is also generated by UV irradiation of HPA. This electron transfer is analogous to the Z-scheme mechanism of plant photosynthetic systems showing two photon reactions. Because of this photoelectron transfer mechanism, the HPA-entrapped TiO₂-Y-zeolite has demonstrated the synergistic enhancement of the photocatalytic decomposition of Methyl Orange and hydrogen generation from photolysis of water.     

Investigation on the formation and decay of the N,N,N′,N′-tetramethylbenzidine radical cation using various oxidants and reductants by stopped-flow spectrophotometry

N,N,N′,N′-Tetramethylbenzidine (TMB) is an aromatic amine that undergoes oxidation by various oxidizing agents such as Ce⁴⁺, MnO⁻₄, Cr₂O²⁻₇; HSO⁻₅, S₂O⁻₈, H₂O₂, Cl₂, Br₂ and I₂, thereby serving as a reducing substrate. One-electron oxidation of TMB results in a radical cation (TMB^˙+), and on further oxidation leads to the product dication (TMB⁺⁺) were monitored by stopped-flow spectrophotometer at the absorption wavelength of TMB^˙+(λ_max; 460 nm). ESR data was also provided to confirm the formation of radical cation. The rates of both the formation and decay of TMB^˙+ have been followed by a total second-order kinetics, a first-order dependence each on [TMB] (or) [TMB^˙+] and [oxidant]. The kinetic and transition state parameters have been evaluated for the effects of pH and temperature on the formation and decay of TMB^˙+ and discussed with suitable reaction mechanisms. Also, the rate constants for the reactions of the radical cation with various reducing agents such as sulfite (SO²⁻₃), thiosulfate (S₂O²⁻₃), dithionite (S₂O²⁻₄) and disulfite (S₂O²⁻₅) and ascorbic acid (vitamin C, AH₂ were determined. Besides these, this article also explains how TMB acts as a better electron relay than unsubstituted benzidine, even though both of them undergo one-electron oxidation and are used in the chemical routes to solar energy conversions. The observed rate constants for electron transfer were correlated theoretically using Marcus theory. The observed and calculated rate constants have good correlation.     

Photoinduced electron transfer between adamantanamine-(OCH2CH2)n-phenothiazine and mono-6-p-nitrobenzoyl-β-cyclodextrin

A series of adamantanamine-(OCH₂CH₂)_n-phenothiazine (n = 0, 1, 2, 3) electron donors was synthesized. Photoinduced electron transfer was observed in the supramolecular complex of the phenothiazine derivatives with p-nitrobenzoyl-β-cyclodextrin (NBCD) through binding of the adamantyl group by the NBCD cavity, which is stabilized clearly via hydrophobic interactions in aqueous solution. Detailed Stern–Volmer constants were measured and they were partitioned into dynamic Stern–Volmer quenching constants and static binding constants. The results revealed an efficient electron transfer process inside the supramolecular systems compared to that controlled by diffusion. This observation also indicates that the chain length will influence the electron transfer efficiency of a supramolecular donor–acceptor system.