Study on ablative properties and mechanisms of hydrogenated nitrile butadiene rubber (HNBR) composites containing different fillers

The ablative properties of hydrogenated nitrile butadiene rubber (HNBR) composites filled with fumed silica, organically modified montmorillonite (OMMT), or expanded graphite (EG) were examined. The HNBR/OMMT composite has the lowest linear ablation rate and the highest mass ablation rate and does not tend to be carbonized. On the other hand, the HNBR/EG composite has the highest linear ablation rate and the lowest mass ablation rate, and is prone to carbonization. The ablative properties of the HNBR/silica composite are between those of HNBR/OMMT and HNBR/EG. From the viewpoint of thermal shielding capability, the HNBR/OMMT has the best ablation resistance. Thermogravimetric analysis (TGA) on different HNBR composites indicated that the filler type has no significant effect on the thermal stability of the composites. To understand the ablation mechanisms, the char layers of different HNBR composites after ablation experiments were characterized by scanning electron microscopy (SEM), energy disperse X-ray spectroscopy (EDS), and wide-angle X-ray diffraction (WAXD). The results showed that the porosity in the char layers of the HNBR/OMMT composite was the highest and the corresponding structure was the loosest of the three composites. The montmorillonite (MMT) dispersed in HNBR experienced phase transition, melting and vaporization when exposed to the flame with the temperature over 2000 °C. Fumed silica only melted at such situation. On the other hand, the EG kept their original crystalline structures after the ablation test. Based on these results, the effect of the filler type on the ablation mechanisms of the HNBR composites was discussed.     

聚合物/石墨纳米复合材料研究进展

综述聚合物 /石墨纳米复合材料近年来的研究情况 ,介绍通过各种不同的途径制备聚合物 /石墨纳米复合材料的过程与原理 ,总结其导电性能 ,机械性能以及影响性能的因素 ,并对其发展做了展望。     

乙二醇对烷基三甲基溴化铵胶团化行为的影响

利用电导法研究了烷基三甲基溴化铵表面活性剂(CnTAB,n=12,14,16),即十二烷基三甲基溴化铵(DTAB),十四烷基三甲基溴化铵(TTAB)和十六烷基三甲基溴化铵(CTAB),在混合极性溶剂乙二醇/水(体积分数0～40%)中的胶团化行为。考察了温度对胶团形成的影响,应用相分离模型估算了三个表面活性剂的胶团热力学参数。结果表明临界胶团浓度(cmc)和反离子解离度(α)都随乙二醇组分的增加而增大。在乙二醇/水混合溶剂中胶团形成的标准吉布斯自由能相差很小,混合焓都是负值,而混合熵都为正值,说明焓-熵补偿效应在胶团形成中起主导作用。     

Influence of char residues on flammability of EVA/EG, EVA/NG and EVA/GO composites

Graphite (expanded graphite(EG), natural graphite (NG) and graphite oxide (GO)) flame retardant poly(ethylene-co-vinyl acetate) copolymer (EVA) composites (EVA/EG, EVA/NG and EVA/GO) have been prepared by melt compounding. The flammability, the combustion process, the quantity of the residual char, the morphology of the residual chars and the thermal stability of the chars were investigated by cone calorimeter, SEM and TGA. The results indicate that heat release rate (HRR), total heat released (THR) and total smoke release (TSR) of EVA/EG (EG 30 phr) composite decrease to about 21%, 42% and 28% of that of pure EVA, respectively. The orders of the three kinds of graphite on the reduction effect of THR and TSR are EG > NG > GO. The higher the quantity, the higher is the thermal stability of the char residue and the more compact and porous char structure may be the main reasons for the phenomenon above. It has been found that the flame retardance of EVA vulcanisates is improved and the fire jeopardizing is dramatically reduced due to the addition of the graphite, especially for EG, which can give some advice to design formulations for practical applications as the jackets of cables.     

Analysis of questioned documents: A review

During the last years (2000–2014), many publications concerning the forensic analysis of questioned documents have been published, and new techniques and methodologies are nowadays employed to overcome forensic caseworks. This article reviews a comprehensive collection of the works focused on this issue, including dating studies, the analysis of inks from pens and printers, the analysis of paper, the analysis of other samples related to questioned documents and studies on intersecting lines. These sections highlight the most relevant analytical studies by a wide range of analytical techniques. Separation and spectrometric techniques are critically discussed and compared, emphasizing the advantages and disadvantages of each one. Finally, concluding remarks on the research published are included.     

Sodium hydroxide-assisted dechlorination of a poly(vinylidene chloride)-containing wrapping film in ethylene glycol solution

Poly(vinylidene chloride) (PVDC) wrapping film was dechlorinated using solutions of NaOH in ethylene glycol (EG) at temperatures between 150 and 190 °C. The reaction was comparable to that for PVDC powder; however, it occurred at a lower NaOH concentration, which can be explained by the dissolution of additives present in the wrapping film. Therefore, the best results for the dechlorination of the wrapping film were obtained at a temperature of 190 °C and NaOH concentrations of 0.1 M and 0.5 M, resulting in dechlorination yields of almost 90% after 135 min. For the dechlorination reaction, the activation energy of the PVDC wrapping film (185 kJ mol⁻¹) was determined to be higher than that of PVDC powder; this finding could be attributed to the presence of a stabilizer and the smaller surface area of the PVDC wrapping film.     

对苯二甲酸二甲酯(DMT)与乙二醇(EG)的酯交换反应模拟动力学

本文在ε-NTU法的基础上,用模拟函数理论方法,拟合DMT与EG在醋酸盐催化下的酯交换反应的动力学模型,得出了相应的反应速度表达式。结果表明:在实验条件下的酯交换反应既不是一级或二级反应,也不是三级反应,是一个二次线型反应,这也恰好证明了Yamanis对以往动力学处理怀疑的正确性。此外对模型中引入参数的物理意义进行了探讨。     

The kinetics of diethylene glycol formation in the preparation of polyethylene terephthalate

For revealing diethylene glycol (DEG) formation in poly(ethylene terephthalate) (PET) synthesis, this research focused on finding the stage most critical for DEG formation. It is found that the esterification stage was the most critical stage for DEG formation during production of PET through the direct esterification process. In addition, the kinetics of the formation of DEG (ether bond), which is mainly produced from hydroxyl end groups of ethylene glycol (EG) and bis-hydroxyethyl terephthalate (BHET) oligomer, was investigated. The results show that the reactivity of BHET-OH functional group is greater than that of EG-OH functional group in the reaction to produce ether bonds. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 3073–3080, 1998     

Development of a new stir bar sorptive extraction method for the determination of medium‐level volatile thiols in wine

A fast, simple, and reliable analytical method for the determination of medium‐level volatile thiols in wines is presented. Stir bar sorptive extraction using ethylene glycol‐silicone coated stir bars has been used in combination with thermal desorption gas chromatography with mass spectrometry for the analysis of 4‐mercapto‐4‐methylpentan‐2‐one, 2‐furanmethanethiol, 3‐mercaptohexyl acetate, and 3‐mercaptohexanol in wine. Optimization of the extraction technique was performed using a two‐level fractional factorial design. For the extraction step, the optimum conditions were: Ethylene glycol and silicone coated stir bars, pH at 3.5, sample volume of 25 mL, extraction time of 90 min, NaCl content 4.0 g, and stirring speed at 500 rpm. The optimized method achieved good linearity for all studied compounds (r² > 0.995) and it provided detection limits of 21.52, 0.36, 0.73, and 2.55 μg/L for 4‐mercapto‐4‐methylpentan‐2‐one, 2‐furanmethanethiol, 3‐mercaptohexyl acetate, and 3‐mercaptohexanol, respectively. It was repeatable, with precisions lower than 18% relative standard deviation for both intraday and interday repeatability. The developed procedure is suitable for the determination of these kinds of compounds when they are present at medium concentration levels. It was finally applied to real wine samples with negative aroma derived from the high concentration levels of these compounds.     

Dechlorination behaviour of flexible poly(vinyl chloride) in NaOH/EG solution

Flexible poly(vinyl chloride) (PVC) was found to be dechlorinated in NaOH/ethylene glycol (EG) solution at moderate temperature and at atmospheric pressure. The degree of dechlorination increased over time with all particle sizes and with decreasing particle size. Decreased particle size resulted in an increased effective surface area, increasing the contact between the material and OH⁻ in the NaOH/EG solution, which contributed to the high degree of dechlorination. The dechlorination of flexible PVC in NaOH/EG solution was expressed as a first-order reaction and proceeded under chemical reaction control. Diisononyl-phthalate (DINP) in the flexible PVC powder decomposed readily into phthalic acid and isononyl alcohol in a short time. For the dechlorination of the flexible PVC, the substitution (S_N2) of chloride by the hydroxyl group was considered to be preferential to the elimination (E2) of hydrogen chloride.