Simultaneous derivatization and air-assisted liquid–liquid microextraction of some aliphatic amines in different aqueous samples followed by gas chromatography-flame ionization detection

The paper presents a new method based on simultaneous derivatization and air-assisted liquid–liquid microextraction (AALLME) for the extraction and preconcentration of some aliphatic amines prior to gas chromatography-flame ionization detection (GC-FID). Primary aliphatic amines are derivatized and extracted simultaneously by a fast reaction with butylchloroformate (derivatization agent/extraction solvent) under mild conditions. The mixture of butylchloroformate and aqueous sample solution is rapidly sucked into a 10-mL glass syringe and then is injected into a test tube with conical bottom and the procedure is repeated seven times. After centrifuging the resulted cloudy solution, the derivatized analytes in the sedimented phase are determined by GC-FID. The influence of main factors on the efficiency of derivatization/extraction procedure is studied. Under the optimal conditions, the enrichment factors (EFs) for aliphatic amines are obtained in the range of 248–360 and limits of detection (LODs) are between 0.30 and 2.6 μg L⁻¹. The obtained extraction recoveries ranged from 50 to 72% and the relative standard deviation (RSD) was less than 4.8% for intra-day (n = 6) and inter-days (n = 4) precision. The method is successfully applied to determine some aliphatic amines in environmental water samples.     

Existence of EF‐equivalent non‐isomorphic models

We prove the existence of pairs of models of the same cardinality λ which are very equivalent according to EF games, but not isomorphic. We continue the paper [4], but we do not rely on it. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Four supramolecular isomers of dichloridobis(1,10‐phenanthroline)cobalt(II): synthesis,structure characterization and isomerization

Crystal engineering can be described as the understanding of intermolecular interactions in the context of crystal packing and the utilization of such understanding to design new solids with desired physical and chemical properties. Free‐energy differences between supramolecular isomers are generally small and minor changes in the crystallization conditions may result in the occurrence of new isomers. The study of supramolecular isomerism will help us to understand the mechanism of crystallization, a very central concept of crystal engineering. Two supramolecular isomers of dichloridobis(1,10‐phenanthroline‐κ²N,N′)cobalt(II), [CoCl₂(C₁₂H₈N₂)₂], i.e. (IA) (orthorhombic) and (IB) (monoclinic), and two supramolecular isomers of dichloridobis(1,10‐phenanthroline‐κ²N,N′)cobalt(II) N,N‐dimethylformamide monosolvate, [CoCl₂(C₁₂H₈N₂)₂]·C₃H₇NO, i.e. (IIA) (orthorhombic) and (IIB) (monoclinic), were synthesized in dimethylformamide (DMF) and structurally characterized. Of these, (IA) and (IIA) have been prepared and structurally characterized previously [Li et al. (2007). Acta Cryst. E 63 , m1880–m1880; Cai et al. (2008). Acta Cryst. E 64 , m1328–m1329]. We found that the heating rate is a key factor for the crystallization of (IA) or (IB), while the temperature difference is responsible for the crystallization of (IIA) or (IIB). Based on the crystallization conditions, isomerization behaviour, the KPI (Kitajgorodskij packing index) values and the density data, (IB) and (IIA) are assigned as the thermodynamic and stable kinetic isomers, respectively, while (IA) and (IIB) are assigned as the metastable kinetic products. The 1,10‐phenanthroline (phen) ligands interact with each other through offset face‐to‐face (OFF) π–π stacking in (IB) and (IIB), but by edge‐to‐face (EF) C—H...π interactions in (IA) and (IIA). Meanwhile, the DMF molecules in (IIB) connect to neighbouring [CoCl₂(phen)₂] units through two C—H...Cl hydrogen bonds, whereas there are no obvious interactions between DMF molecules and [CoCl₂(phen)₂] units in (IIA). Since OFF π–π stacking is generally stronger than EF C—H...π interactions for transition‐metal complexes with nitrogen‐containing aromatic ligands, (IIA) is among the uncommon examples that are stable and densely packed but that do not following Etter's intermolecular interaction hierarchy.     

Effects of Curcumin Analogues DMC and EF24 in Combination with the Cytokine TRAIL against Kidney Cancer

The natural compound curcumin has been shown to have therapeutic potential against a wide range of diseases such as cancer. Curcumin reduces cell viability of renal cell carcinoma (RCC) cells when combined with TNF-related apoptosis-inducing ligand (TRAIL), a cytokine that specifically targets cancer cells, by helping overcome TRAIL resistance. However, the therapeutic effects of curcumin are limited by its low bioavailability. Similar compounds to curcumin with higher bioavailability, such as demethoxycurcumin (DMC) and 3,5-bis(2-fluorobenzylidene)-4-piperidone (EF24), can potentially have similar anticancer effects and show a similar synergy with TRAIL, thus reducing RCC viability. This study aims to show the effects of DMC and EF24 in combination with TRAIL at reducing ACHN cell viability and ACHN cell migration. It also shows the changes in death receptor 4 (DR4) expression after treatment with these compounds individually and in combination with TRAIL, which can play a role in their mechanism of action.     

Optimization of a heart-cutting multidimensional gas chromatography-based method for the assessment of enantiomeric fractions of o,p′-DDT in environmental samples

The enantiomeric fractions present in soil samples may provide information useful in distinguishing recent inputs of DDT from past DDT pollution. In this study, a chromatographic procedure for the determination of the enantiomeric fractions of o,p′-DDT based on heart-cutting multidimensional gas chromatography was developed. The optimization carried out achieved low ratios of DDT degradation (<15%) in the chromatographic system. High selectivity and sensitivity in the detection of the target compounds, with a limit of detection as low as 2.1 pg μL⁻¹, was reached. In addition, high degrees of repeatability (RSD < 2.0%) and reproducibility (RSD < 3.2%) were obtained for the enantiomeric fractions measured in analytical standards and soil samples.     

Application of carbon-based nanomaterials in sample preparation: A review

In this paper, a broad overview on the applications of different carbon-based nanomaterials, including nanodiamonds, fullerenes, carbon nanotubes, graphene, carbon nanofibers, carbon nanocones-disks and nanohorns, as well as their functionalized forms, in sample preparation is provided. Particular attention has been paid to graphene because many papers regarding its application in this research field are becoming available. The distinctive properties, derivatization methods and application techniques of these materials were summarized and compared. According to their research status and perspective, these nanomaterials were classified in four groups (I: graphene and carbon nanotubes; II: carbon nanofibers; III: fullerenes; and IV: nanodiamonds, carbon nanocones/disks and carbon nanohorns) and characteristics and future trends of every group were discussed.     

Two multidimensional chromatographic methods for enantiomeric analysis of o,p′-DDT and o,p′-DDD in contaminated soil and air in a malaria area of South Africa

In rural parts of South Africa the organochlorine insecticide DDT (1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane) is still used for malaria vector control where traditional dwellings are sprayed on the inside with small quantities of technical DDT. Since o,p′-DDT may show enantioselective oestrogenicity and biodegradability, it is important to analyse enantiomers of o,p′-DDT and its chiral degradation product, o,p′-DDD, for both health and environmental-forensic considerations. Generally, chiral analysis is performed using heart-cut multidimensional gas chromatography (MDGC) and, more recently, comprehensive two-dimensional gas chromatography (GC × GC). We developed an off-line gas chromatographic fraction collection (heart-cut) procedure for the selective capturing of the appropriate isomers from a first apolar column, followed by reinjection and separation on a second chiral column. Only the o,p′-isomers of DDT and DDD fractions from the first dimension complex chromatogram (achiral apolar GC column separation) were selectively collected onto a polydimethylsiloxane (PDMS) multichannel open tubular silicone rubber trap by simply placing the latter device on the flame tip of an inactivated flame ionisation detector (FID). The multichannel trap containing the o,p′-heart-cuts was then thermally desorbed into a GC with time-of-flight mass spectrometry detection (GC–TOFMS) for second dimension enantioselective separation on a chiral column (β-cyclodextrin-based). By selectively capturing only the o,p′-isomers from the complex sample chromatogram, ¹D separation of ultra-trace level enantiomers could be achieved on the second chiral column without matrix interference. Here, we present solventless concentration techniques for extraction of DDT from contaminated soil and air, and report enantiomeric fraction (EF) values of o,p′-DDT and o,p′-DDD obtained by a new multidimensional approach for heart-cut gas chromatographic fraction collection for off-line second dimension enantiomeric separation by ¹D GC–TOFMS of selected isomers. This multidimensional method is compared to the complementary technique of comprehensive GC × GC–TOFMS using the same enantioselective column, this time as the first dimension of separation.     

Combining multivariate analysis and geochemical approaches for assessing heavy metal level in sediments from Sudanese harbors along the Red Sea coast

Multivariate statistical analysis and geochemical approaches were exploited for the assessment of the level of some heavy metals (Mn, Fe, Ni, Cu, Zn and Pb) in sediments from Sudanese harbors along the Red Sea coast. Principal component analysis, as a multivariate statistical analysis approach, was applied to identify contribution sources by heavy metals in sediments. While a single source (crustal) was recorded in the bulk sediments and coarse sediment grains (grain-size 1000-500 µm), two sources (crustal and anthropogenic) were recorded in fine sediment grains (grain-size < 500 µm). Furthermore, enrichment factor (EF), as a geochemical approach, appointed polluted sites by heavy metals in the study area. Based upon a previous study addressed the interpretation of EF values, minor to moderate anthropogenic enrichment were recorded in sediments from some sites in the study area. The main anthropogenic activities that believed to be the major sources of pollution by heavy metals in the study area are discharges from oil refinery, industry, shipping activity and domestic waste. Hierarchical cluster analysis (HCA), as another multivariate statistical analysis approach, was applied for the concentrations of heavy metals in bulk sediments to group sediments according to their mineralogical composition. The output of HCA is that sediments from the Port-Sudan harbor can be divided mainly into three areas — east, west and south. For the Sawakin harbor, no apparent trend for the spatial distribution of heavy metals in sediments was recorded.     

Electrical field-induced extraction and separation techniques: Promising trends in analytical chemistry – A review

Sample preparation is an important issue in analytical chemistry, and is often a bottleneck in chemical analysis. So, the major incentive for the recent research has been to attain faster, simpler, less expensive, and more environmentally friendly sample preparation methods. The use of auxiliary energies, such as heat, ultrasound, and microwave, is one of the strategies that have been employed in sample preparation to reach the above purposes. Application of electrical driving force is the current state-of-the-art, which presents new possibilities for simplifying and shortening the sample preparation process as well as enhancing its selectivity. The electrical driving force has scarcely been utilized in comparison with other auxiliary energies. In this review, the different roles of electrical driving force (as a powerful auxiliary energy) in various extraction techniques, including liquid-, solid-, and membrane-based methods, have been taken into consideration. Also, the references have been made available, relevant to the developments in separation techniques and Lab-on-a-Chip (LOC) systems. All aspects of electrical driving force in extraction and separation methods are too specific to be treated in this contribution. However, the main aim of this review is to provide a brief knowledge about the different fields of analytical chemistry, with an emphasis on the latest efforts put into the electrically assisted membrane-based sample preparation systems. The advantages and disadvantages of these approaches as well as the new achievements in these areas have been discussed, which might be helpful for further progress in the future.