The Effects of Beating,Web Forming and Sizing on the Surface Energy of <Emphasis Type="Italic">Eucalyptus globulus</Emphasis> Kraft Fibres Evaluated by Inverse Gas Chromatography

In this work attention has been focused on the effects of papermaking beating, web forming and sizing operations on the physical/chemical surface properties of bleached Eucalyptus globulus kraft fibres. Inverse gas chromatography (IGC) was used to determine the dispersive component of surface tension (γ_s^d) as well as the acidic/basic character (according to the Lewis concept) of the solid surfaces (pulp fibres and pulp handsheets). The results have shown that the main effect of beating is to increase the fibre's Lewis acidic character. Web forming caused a strong decrease in γ_s^d and significant increments in the adhesion works of both acidic and basic probes, lowering the ratio between the two. Nevertheless, the surface of handsheets still exhibited a dominant acidic character. The sizing operation did not change the dispersive component of the surface tension significantly but decreased the difference between the adhesion works of the acidic and basic probes, rendering the handsheet surface less Lewis acidic and more Lewis basic. Thus, although internal sizing is expected to strongly influence liquid spreading at the paper surface and liquid penetration of the fibre's network, it is concluded that beating and web forming lead to important changes in the surface energetic properties of the Eucalyptus globulus kraft fibres.     

Enzymatic bleaching of organosolv sugarcane bagasse pulps with recombinant xylanase of the fungus Humicola grisea and with commercial cartazyme HS xylanase

Organosolv (ethanol/water and acetosolv) pulps were treated with Humicola grisea var. thermoidea and compared with Cartazyme HS xylanase-treated pulp. The ethanol/water pulps treated with H. grisea had the same viscosity as unbleached pulps (8 cP). Ethanol/water pulps treated with Cartazyme had higher viscosity than H. grisea-treated pulps (12 cP). Acetosolv pulps treated with H. grisea and Cartazyme presented a reduction in viscosity; however, the pulps treated with H. grisea had a lower reduction in viscosity than Cartazyme-treated pulps. Ethanol/water pulps treated with H. grisea had a 23% reduction in kappa number in 4 and 8 h of treatment, compared with the unbleached pulps. Cartazyme-treated pulps had a kappa number similar to that of the control pulps for 4 h of treatment. Extending the treatment time to 12 h resulted in a reduction of 33%. The acetosolv pulp treated with H. grisea had a kappa number reduced to 23% in 4 h. Cartazyme treatment resulted in a reduction of 55 and 44% in kappa number for 4 and 8 h of treatment, respectively, when compared with control pulp. Extending the treatment time to 12 h decreased the kappa number 72%. Fourier transform infrared spectra and principal component analysis showed differences among unbleached, H. grisea-treated, and Cartazyme-treated pulps.     

Molecular properties of hemicelluloses located in the surface and inner layers of hardwood and softwood pulps

The molecular properties of hemicelluloses located in the surface and inner layers of fibers present in hardwood and softwood pulps, together with the effects of different bleaching processes on these properties, have been investigated in this study. In order to separate the hemicelluloses located in these two layers, fibers were subjected to mechanical peeling and then separated by filtration into surface (filtrate) and inner layer materials. The materials thus obtained were characterized with respect to their polysaccharide compositions and uronic acid contents. The molar mass parameters of the hemicelluloses (extracted by alkali) were determined by employing size-exclusion chromatography in combination with off-line MALDI mass spectrometry. For all of the pulps examined, the relative content of xylan was found to be greater in the surface layer of the fiber than in the corresponding inner layer. The xylan polymers of the surface layer exhibited higher molar masses and lower frequencies of uronic acid side groups than did the xylans in the inner fiber layer. In connection with ozone treatment, hexenuronic acid residues in the surface layer xylan were removed to a greater extent than in the case of the inner layers, indicating a gradient for the reaction with ozone across the fiber wall. The xylan polymer remaining on the surface of the softwood pulps after completion of the chlorine dioxide bleaching process was predominantly uncharged.     

Distribution of free amino acids,polyphenols and sugars of Ziziphus jujuba pulps harvested from plants grown in Tunisia

Ziziphus jujuba pulps are very much appreciated by the inhabitants and have been recently exported. This article reports on the chemical composition (amino acids, polyphenols and sugars) of the pulps of four Z. jujuba ecotypes (Choutrana, Mahdia, Mahres and Sfax). The major amino acids identified were proline, aspartic acid and glutamic acid. Among these, proline was the most abundant amino acid (17.4 mol). Considerable differences in total phenolic contents (15.85 mg/L) were found. Predominant phenols identified by using HPLC were rutin (1.09 mg/L) and chlorogenic acid (2.57 mg/100 g). Sugars isolated from Ziziphus pulps were found at a rate of 43.52%. Using HPLC method, three sugars from the pulp extract were identified: glucose, galactose and sucrose. The Mahdia ecotype was the richest in these sugars with 0.45, 136.51 and 113.28 mg/L, respectively.     

Upgrading of paper grade pulps to dissolving pulps by nitren extraction: yields,molecular and supramolecular structures of nitren extracted pulps

Different paper grade pulps were extracted with nitren in order to produce dissolving pulps and polymeric xylan. The yield and molecular structure of the extracted pulps were investigated by carbohydrate analysis and HPSEC combined with fluorescence labelling in order to additionally monitor the carbonyl and carboxyl group profiles of the pulps. The supramolecular structure of selected pulps were further studied by solid state ¹³C-CP/MAS-NMR and wide-angle X-ray scattering (WAXS). These supramolecular data of nitren extracted pulps were compared to samples extracted with NaOH and a conventional dissolving pulp in order to classify the properties of nitren extracted pulps. Nitren extraction results in selective xylan removal without noticeable degradation or oxidation of the cellulose fraction. The resulting dissolving pulps have high molar masses, a narrow molar mass distribution and the typical contents of carbonyl and carboxyl groups. The supramolecular structure of cellulose is less affected by nitren compared to strong NaOH, and the resultant dissolving pulps still have the cellulose I structure. All laboratories are members of the European polysaccharide network of excellence EPNOE.     

Evaluation of new organosolv dissolving pulps. Part II: Structure and NMMO processability of the pulps

The supermolecular structure of dissolving pulps produced from hardwood by the organosolv processes Acetosolv, Formacell, and Milox was characterized by physical methods (TEM, WAXS, SAXS, NMR) and compared with conventional Sulfite and standard commercial dissolving pulps. The suitability of the pulps for the NMMO technology was tested by spinning fibres and blowing films, whose structural and mechanical properties have also been determined. With TEM it was shown that the TCF-bleached organosolv pulps have only the primary (Formacell), the primary and S1 (Milox), or mainly the S1 (Acetosolv) layers exposed to the surface, whereas Sulfite pulping exposes the S2 cell wall layer. Especially for Milox and Acetosolv Eucalyptus wood pulps, a reduced degree of crystallinity was found, both with WAXS and NMR. The SAXS results indicate a lower pore intersection length for the new pulps as compared to conventional pulps. Unbleached organosolv pulps show a lower crystallinity, very low pore intersection lengths, and an average crystallite shape different from their bleached counterparts. The dissolution behaviour in NMMO and the processability of the bleached organosolv pulps was satisfactory so far. Fibres and films could be produced with structural and mechanical properties comparable with conventional Sulfite and standard commercial dissolving pulp products. However, unbleached organosolv pulps did not meet the requirements of the NMMO process.     

STUDY ON THE MECHANISM OF NYLON 6, 6 DISSOLVING PROCESS USING CaCl_2/MeOH AS THE SOLVENT

A discussion of the mechanism of nylon 6, 6 dissolving process using CaCl_2/MeOH as the sol-vent is presented. The calcium chloride forms a complex compound with nylon 6, 6 by breakingthe hydrogen bonds. The melting point of the CaCl_2 --nylon 6, 6 complex was found to be reducedby 91K relative to the pure nylon 6, 6 polymer. The role of methanol is somewhat similar to acatalyst. The results demonstrate that the complexation of a Lewis acid (CaCl_2) and a Lewis base(nylon 6, 6) can be used to probe intermolecular interactions such as hydrogen bonding in polymers, to modify the polymer properties and mediate its solubility and processing.     

Cellulose Depolymerisation and Paper Properties in E. Globulus Kraft Pulps

The aim of this work was to study the impact of cellulose depolymerisation on the beating potential and handsheet properties of the portuguese E. globulus kraft pulp. A homogeneous sample of eucalypt wood chips was cooked using different kraft pulping conditions (cooking temperatures and times, and sodium hydroxide and sodium sulphide concentrations) in order to obtain a wide variation for intrinsic viscosity of the pulps. In the range of industrial cooking conditions, this property was found to be linearly dependent on the effective alkali charge, for a given cooking time and temperature. Unbeaten and beaten (at 2000 rev. PFI) pulp properties were evaluated and the results confirm that the higher the pulp intrinsic viscosity the better the pulp beatability and the paper properties. However, the differences in the latter cannot be exclusively explained by the differences in viscosity, since pulps with the same viscosity may exhibit distinct papermaking potentials. It was then necessary to scan other pulp chemical characteristics that could also influence the development of paper properties such as lignin, pentosan content and polysaccharides relative composition.     

醋酸介质中溶解氧对不锈钢和磷脱氧铜腐蚀行为影响

应用极化曲线法和溶解氧测量技术研究不锈钢_2 0 6和磷脱氧铜在醋酸介质中的腐蚀行为以及过程的控制特征 .分析在含氧及采用抗坏血酸去除部分溶解氧的醋酸介质中 ,醋酸浓度、氯度、温度对上述两种金属腐蚀行为的影响因素 ,为石油化工中的醋酸设备的正确选材及有效防腐提供理论和实验依据     

Effect of wet spinning parameters on the properties of novel cellulosic fibres

Novel cellulose fibres (Biocelsol) were spun by traditional wet spinning technique from the alkaline solution prepared by dissolving enzyme treated pulp directly into aqueous sodium zincate (ZnO/NaOH). The spinning dope contained 6 wt.% of cellulose, 7.8 wt.% of sodium hydroxide (NaOH) and 0.84 wt.% of zinc oxide (ZnO). The fibres were spun into 5% and 15% sulphuric acid (H₂SO₄) baths containing 10% sodium sulphate (Na₂SO₄). The highest fibre tenacity obtained was 1.8 cNdtex⁻¹ with elongation of 15% and titre of 1.4 dtex. Average molecular weights and shape of molecular weight distribution curves of the celluloses from the novel wet spun cellulosic fibre and from the commercial viscose fibre were close to each other.