Simple, expedient methods for the determination of water and electrolyte contents of cellulose solvent systems

The concentrations of water, W, and electrolytes present in solutions of LiCl in N,N-dimethylacetamide, LiCl/DMAc, and of tetrabutylammonium fluoride. x-hydrate in DMSO, TBAF.xW/DMSO can be accurately and expediently determined by three independent methods, UV–vis, FTIR and EMF measurement. The first relies on the use of solvatochromic probes whose spectra are sensitive to solution composition. It is applicable to W/LiCl/DMAc solutions but not to TBAF.xW/DMSO, because the charge-transfer complex bands of the probes are suppressed by strong interactions with the latter electrolyte. Integration of ν_OH band of water may be employed in order to determine [W], hence [electrolyte] by weight difference. EMF measurement uses ion-selective electrodes in order to determine [electrolyte], hence [W] by weight difference. Results of the latter method were in excellent agreement with those of FTIR. The reason for the failure of Karl Fischer titration is addressed, and the relevance of the results obtained to functionalization of cellulose under homogenous solution conditions is briefly commented on.     

Crystal dissolution kinetics and Gibbs free energy

The dependence of dissolution rates on the difference of Gibbs free energy is of critical importance for our understanding of crystal dissolution, reactive flow models and their applications to a variety of environmentally related problems. Here, we review experimental data generated with mineral powders and single crystals to develop a better understanding of apparent inconsistencies between otherwise internally consistent data sets. Additional information from direct surface observations and measurements with vertical scanning interferometry (VSI) and atomic force microscopy (AFM) of albite dissolution at 25, 150 and 185 °C may shed new light on this old but unsolved question. Our discussion is based on the importance of etch pit development, its ΔG dependence, and the pits’ role as a source for steps and step movement in the dissolution process. Results indicate that reaction history may be of critical importance in determining the overall reaction mechanism and its rate. Different rates are observed for systems having otherwise identical ΔG_r acquired from increasing versus decreasing disequilibrium positions.

In this context, we finally discuss the validity of the common application of transition state theory (TST) to elementary and overall reactions governing the dissolution process. In this discussion of crystal dissolution, we contrast TST applications with a stochastic, many-body treatment that has led to the development of a stepwave model. This discussion also focuses on the controversy caused by the rivalry between surface adsorption models and a probabilistic model that seeks to incorporate the full three-dimensional crystal structure.     

Excess enthalpies of some 2-alkanone + 1-chloroalkane binary mixtures at 25 and 35°C

Excess molar enthalpies h^E at 25 and 35° C and atmospheric pressure, are reported for the binary mixtures formed by a 2-butanone and 2-pentanone with 1-chlorobutane, 1-chloropentane, 1-chlorohexane, or 1-chlorooctane. The h^E values for all the mixtures are positive, increasing as the 1-chloroalkane length increases and as the ketone length decreases. Excess molar enthalpies depend slightly on the temperature. The experimental values together with those from the literature were used to calculate the interaction parameters for the Dang-Tassios version of the UNIFAC model.Communicated at the Festsymposium celebrating Dr. Henry V. Kehiaian's 60^th birthday, Clermont-Ferrand, France, 17–18 May 1990.     

Partial molal heat capacities of aqueous tetraalkylammonium bromides as functions of temperature

Enthalpies of solution have been measured from 5 to 85°C for aqueous tetraethyl- and tetrapropylammonium bromides, and the integral heat method is employed to evaluate for these electrolytes over a wide temperature range. Data taken from the literature have been used to evaluate for aqueous Bu₄NBr over a similar temperature range. These data, along with similar data for Me₄NBr, previously reported, have been used to evaluate absolute ionic heat capacities. While the absolute values agree only qualitatively with two other methods of division, the temperature dependences of the three methods essentially agree up to 65°C. Heat capacities due to structural effects on the solvent, obtained by subtracting the inherent heat capacities of the ions, are extraordinarily positive for all four tetraalkylammonium ions and have negative temperature coefficients, indicating that all four ions, including the tetramethylammonium ion, are structure-making ions.     

Chiral recognition in aqueous solutions. Preferential configurations of α-aminoacids bearing substituted alkyl chains at 25°C

Calorimetric measurements were carried out at 25°C on binary and ternary aqueous solutions containing L and D forms fo the following -aminoacids: tryptophan, cysteine, methionine, phenylalanine, histidine, threonine, and citrulline, which contain both hydrophilic and hydrophobic domains. Differences were found between the values of the homochiral and heterochiral pairwise enthalpic interaction coefficients for tryptophan, cysteine, and methionine. To the contrary, chiral recognition was not detected for phenylalanine, histidine, citrulline, and threonine. The data were interpreted in terms of a preferential configuration model. Chiral recognition is detected only when the interactions of the side chains in the homo- and heterochiral configurations are different. Chiral recognition disappears when a competition exists between zwitterion-zwitterion interactions and side chain-side chain interactions. In some cases, such as for citrulline, compensation effects can occur due to thermal contributions from different domains which mask chiral recognition.     

Excess partial molar enthalpies,entropies, Gibbs energies,and volumes in aqueous dimethylsulfoxide

The excess partial molar enthalpies, the vapor pressures, and the densities of dimethylsulfoxide (DMSO)–H₂O mixtures were measured and the excess partial molar Gibbs energies and the partial molar volumes were calculated for DMSO and for H₂O. The values of the excess partial molar Gibbs energies for both DMSO and H₂O are negative over the entire composition range. The results for the water-rich region indicated that the presence of DMSO enhances the hydrogen bond network of H₂O. Unlike monohydric alcohols, however, the solute-solute interaction is repulsive in terms of the Gibbs energy. This was a result of the fact that the repulsion among solutes in terms of enthalpy surpassed the attraction in terms of entropy. The data in the DMSO-rich region suggest that DMSO molecules form clusters which protect H₂O molecules from exposure to the nonpolar alkyl groups of DMSO.     

Electrochemical dissolution of magnetite in acid solutions

The present paper deals with the electrochemical behavior of magnetite microcrystals in an acid medium. A voltammetric method employing a carbon-paste electroactive electrode (CPEE) with an organic binder was used. It was found that the cathodic voltammograms, which were recorded at different scan rates, formed a set bounded in the space of i–E parameters by a generalizing voltammetric curve corresponding to the effective potential scan rate _eff. In other words, all curves are situated under one enveloping curve, just as the smaller dolls sit in the largest doll of a Russian doll. Reverse currents (a cathodic current in the anodic direction of the potential scan) were observed on the cyclic voltammogram. Forward and reverse currents obey the same laws and have one and the same generalizing curve, which could be taken as the magnetite characteristic.     

Enthalpies of solution and of crystallization of lithium nitrate and of lithium nitrate trihydrate in water at 25°C

The enthalpies of crystallization of LiNO₃ and LiNO₃–3H₂O from aqueous solutions at 25°C, measured by a calorimetric method and determined from the previously published data on the concentration dependence of the enthalpy of solution, are reported. The results are compared with the values obtained from the concentration dependences of the activity coefficients and from the temperature dependences of the solubilities. The enthalpy of solution at infinite dilution and the enthalpy of hydration are given.     

Preparation of cellulose samples for size-exclusion chromatography analyses in studies of paper degradation

Hydrolytic degradation of cellulose was shown to take place during the activation procedure in distilled water during the dissolution procedure of cellulose samples from papers for size-exclusion chromatography analyses in the lithium chloride-N,N-dimethylacetamide (DMAc) solution system. The use of dilute aqueous sodium hydroxide solution in the activation procedure prevents hydrolytic degradation of cellulose during the dissolution procedure, especially in the case of samples of aged papers with low pH. The use of the freeze-drying technique provides samples of cellulose ready-made for dissolution in lithium chloride-N,N-dimethylacetamide solution.     

Thermodynamic properties of aqueous organic mixtures near the critical demixing: Cases of 2,6-dimethylpyridine and of 2-isobutoxyethanol

Phase diagrams, volumes and heat capacities of aqueous mixtures of 2,6-dimethylpyridine (2,6-L) and 2-isobutoxyethanol (iBE) and activities of 2,6-L in aqueous mixtures were measured in the monophasic region near the lower critical solution temperature (LCST). With 2,6-L some measurement were also made just above the LCST. From the temperature dependence of these data, partial molar relative enthalpies (2,6-L), expansibilities and the temperature derivative of heat capacities were calculated and show that iBE undergoes a microphase transition at low concentration which is not related to the phase separation. On the other hand, the properties of 2,6-L in the water-rich region at temperatures well below the LCST indicates that this solute has only a slight tendency to associate. The heat capacities of 2,6-L show an important increase near the LCST. Such changes are not observed for iBE and other alkoxyethanols and amines since these systems already exist in the form of microphases; the partial molar properties of iBE near the LCST are nearly equal to the molar values of the pure liquid, and the changes in thermodynamic properties corresponding to the macroscopic phase transition, are therefore too small to be measured by the present techniques.