Die Kristallstruktur des Calciumazid-Dihydrates

Single crystals of Ca(N₃)₂·2 H₂O have been prepared from aqueous solutions at room temperature. The crystals are monoclinic,a=1 159.0 (3),b=614.2 (2),c=785.5 (2) pm, =106.52 (2)°,Z=4, space group P2₁/n. The crystal structure was determined by single crystal X-ray diffraction (1 109 Mo-K-reflexions,R=0.052). Calcium atoms are surrounded by four azide groups and four water molecules. The coordination polyhedra are antiprism which are sharing azide groups and water molecules to form layers. The lattice constants and powder pattern agree well with values reported earlier for Ca(N₃)₂ · 1.5 H₂O [1]. It was also shown, that Sr(N₃)₂ · 2 H₂O is isotypic with Ca(N₃)₂ · 2 H₂O.

     

Optical oxygen sensing materials based on a novel dirhenium(I) complex assembled in mesoporous silica

A new dirhenium(I) complex fac-[{Re(CO)₃(4,7-dinonadecyl-1,10-phenanthro -line)}₂ (4,4′-bipyridyl)] (trifluoromethanesulfonate)₂ (denoted as D-Re(I) ) is assembled in MCM-41 and SBA-15 type mesoporous silica support. The emission peaks of D-Re(I) in D-Re(I)/MCM-41 and D-Re(I)/SBA-15 are observed at 522 and 517 nm, respectively. Their long excited lifetimes, which are of the order of microseconds, indicate the presence of phosphorescence emission arising from the metal to ligand charge-transfer (MLCT) transition. The luminescence intensities of D-Re(I)/MCM-41 and D-Re(I)/SBA-15 decrease remarkably with increase in the oxygen concentration, meaning that they can be used as optical oxygen sensing materials based on luminescence quenching. The ratios I₀/I₁₀₀ of D-Re(I)/MCM-41 and D-Re(I)/SBA-15 are estimated to be 5.6 and 20.1, respectively. The obtained Stern-Volmer oxygen quenching plots of the mesoporous sensing materials could be fitted well to the two-site Demas model and Lehrer model.     

Investigation on Vibrational Spectra and Structures of 4-Mercaptopyridine Monomer and Its Dihydrate

Introduction4-Mercaptopyridine(4MPY)has been always em-ployed as a model molecule and a probe molecule forRaman spectra in many studies because of its specialstructure with two active groups and its excellent signalin a Raman spectrum.Therefore,4MPY has b…     

The Synthesis and Characterization of Re2(Xap)4Cl2 Compounds

Five dirhenium(III) compounds, Re₂(3,5-(CH₃)₂ap)₄Cl₂ (1), Re₂(ap)₄Cl₂ (2), Re₂(3-MeOap)₄Cl₂ (3), Re₂(3-Clap)₄Cl₂ (4), and Re₂(3,5-Cl₂ap)₄Cl₂ (5), were synthesized and characterized, where 3,5-(CH₃)₂ap, ap, 3-MeOap, 3-Clap and 3,5-Cl₂ap are 2-(3,5-dimethylanilino)pyridinate, 2-anilinopyridinate, 2-(3-methoxyanilino)pyridinate, 2-(3-chloroanilino)pyridinate and 2-(3,5-dichloroanilino)pyridinate, respectively. Structural studies revealed the Re–Re bond lengths ranging from 2.2214(4) to 2.2262(11) Å, signifying that the dirhenium core maintains its quadruple bond. The asymmetric nature of 2-anilinopyridinate ligands resulted in several possible regioisomers: compounds 1 and 4 adopt a cis-(2,2) arrangement, while compounds 2 and 5 assume trans-(2,2) and (3,1) arrangements, respectively. All five compounds display three (quasi)reversible one electron couples, two oxidations and one reduction, and their electrode potentials correlate linearly with the Hammett constant of the aniline substituent.     

Einkristalluntersuchungen an AgF2

Single Crystal Investigation on AgF₂ For the first time single crystals of AgF₂ (black, metalic bright) have been obtained by heating AgF₂ powder under a mixture of HF and F₂ in autoclaves at 400°C. It crystallizes orthorhombic in the space group Pbca – D (Nr. 61) – with a = 556.8(1), b = 583.1(1) and c = 510.1(1) pm; Z = 4. The Madelung Part of Lattice Energy, MAPLE, and the Effective Coordination Number, ECoN, via the Mean Fictive Ionic Radii, MEFIR, are calculated and discussed.     

Zur Reaktion des Rhenium(VII)-oxids mit 1,4-Dioxan – Kristallstruktur von Re2O7(OH2)2 · 2(1,4-Dioxan)

Reaction of Rhenium(VII) Oxide with 1,4-Dioxane – Crystal Structure of Re₂O₇(OH₂)₂ · 2(1,4-Dioxane) By solvolysis of polymeric Re₂O₇ with 1,4-dioxane in the presence of small amounts of H₂O two products of compositions Re₂O₆(OH)₂ · 3(1,4-dioxane) ( 1 ) and Re₂O₇ · 2H₂O · 2(1,4-dioxane) ( 2 ) are formed. From a complete X-ray single-crystal structure analysis 2 could now be characterized structurally (monoclinic, space group P2₁/c, a = 6.828(3) Å, b = 9.530(2) Å, c = 26.421(8) Å, β = 91.71(3)°, Z = 4). The compound is important as a convenient precursor for the preparation of pure rhenium trioxide. It is to be formulated as Re₂O₇(OH₂)₂ · 2(1,4-dioxane) and contains, contrary to 1 , no 1,4-dioxane coordinated to Re. The crystalline phase consists of a supramolecular arrangement of Re₂O₇(OH₂)₂ units as in “solid perrhenic acid” and of 1,4-dioxane molecules associated through O? H …? O hydrogen bridges. Analogous to dirhenium heptoxide and to solid perrhenic acid one of the rhenium atoms is in tetrahedral, the other is in distorted octahedral coordination.     

Reactions of rhenium and manganese carbonyl complexes with 1,8-bis(diphenylphosphino)naphthalene: Ligand chelation, C-H and C-P bond-cleavage reactions

Reaction of [Re₂(CO)₈(MeCN)₂] with 1,8-bis(diphenylphosphino)naphthalene (dppn) afforded three mono-rhenium complexes fac-[Re(CO)₃(κ¹:η¹-PPh₂C₁₀H₆)(PPh₂H)] (1), fac-[Re(CO)₃{κ¹:κ¹:η¹-(O)PPh₂C₁₀H₆(O)PPh(C₆H₄)}] (2) and fac-[ReCl(CO)₃(κ²-PPh₂C₁₀H₆PPh₂)] (3). Compounds 1-3 are formed by Re-Re bond cleavage and P-C and C-H bond activation of the dppn ligand. Each of these three complexes have three CO groups arranged in facial fashion. Compound 1 contains a chelating cyclometalated diphenylnaphthylphosphine ligand and a terminally coordinated PPh₂H ligand. Compound 2 consists of an orthometalated dppn-dioxide ligand coordinated in a κ¹:κ¹:η¹-fashion via both the oxygen atoms and ortho-carbon atom of one of the phenyl rings. Compound 3 consists of an unchanged chelating dppn ligand and a terminal Cl ligand. Treatment of [Mn₂(CO)₈(MeCN)₂] with a slight excess of dppn in refluxing toluene at 72 °C, gave the previously reported [Mn₂(CO)₈(μ-PPh₂)₂] (4), formed by cleavage of C-P bonds, and the new compound fac-[MnCl(CO)₃(κ²-PPh₂C₁₀H₆PPh₂)] (5), which has an unaltered chelating dppn and a terminal Cl ligand. In sharp contrast, reaction of [Mn₂(CO)₈(MeCN)₂] with slight excess of dppn at room temperature yielded the dimanganese [Mn₂(CO)₉{κ¹-PPh₂(C₁₀H₇)}] (6) in which the diphenylnaphthylphosphine ligand, formed by facile cleavage of one of the P-C bonds, is axially coordinated to one Mn atom. Compound 6 was also obtained from the reaction of [Mn₂(CO)₉(MeCN)] with dppn at room temperature. The XRD structures of complexes 1-3, 5, 6 are reported.     

Silica Sulfuric Acid/Sodium Dichromate Dihydrate as an Efficient Heterogeneous Method for the Oxidation of Alcohols Under Mild Conditions

A combination of silica sulfuric acid and sodium dichromate dihydrate in the presence of wet SiO 2 were used as an effective oxidizing agent for the oxidation of alcohols to their corresponding aldehyde or ketone derivatives in dichloromethane or toluene with excellent yields.     

Ab initio calculations on some transition metal heptoxides by using effective core potentials

The ab initio molecular structures and vibrational frequencies for several transition metal heptoxides X₂O₇ⁿ⁻ (n=0, 2, 4) were calculated using effective core potentials at the HF and DFT (B3LYP) levels. The relative merits of different valence basis set arrangements were tested by comparison with experimental results available, in particular with gas-phase Re₂O₇ molecular structure and vibrational frequencies. The calculations were then extended to other heptoxides of the VB, VIB and VIIB transition metal groups. The results indicate that a staggered geometry (either D_3d or C₂) is the energy minimum for most of the heptoxides studied. The only exceptions are Mn₂O₇, which clearly prefers an eclipsed C_2v(syn) configuration, and Tc₂O₇, for which C₂ and C_2v(syn) geometries have nearly the same energy.

Particular attention was given to the magnitude of the X–O–X bond angle, as this structural parameter has been a matter of some controversy. The calculated values range from 125° (Mn₂O₇) to 180° (Group VB heptoxides) and depend on the position of the transition metal in the Periodic Table. A tendency for linearity of the X–O–X moiety on going both downwards the group and backwards the period was observed and discussed.     

Einführung eines terminalen Halogenoliganden in diorgano-verbrücke Dirhenium- und Molybdän-Rhenium-Komplexanionen in Gegenwart eines Amidinkations

Insertion of a Terminal Halogeno Ligand into Diorgano-bridged Dirhenium and Rhenium-Molybdenum Complex Anions in the Presence of an Amidin Cation and the Isomerization Processes The equimolar reaction of in situ generated anion Anions Re₂(μ-PCy₂)(CO)₈^? (Re? Re) in the presence of a steric expansive amidine cation DBUH⁺ with bromine and iodine in tetrahydrofuran solution gave the two isomers Re₂(PCy₂)(CO)₈X (Re? Re) and Re₂(μ-PCy₂)(μ-X)(CO)₈ (X = Br, I), of which the isomer with a terminal X ligand as major product was formed under maintenance of the Re? Re bond. The monotropic isomerization process of Re₂(μ-PCy₂)(CO)₈I runs thermically relative slowly, but more rapid in photochemical and electrochemical processes. The analogeous reaction of the heterometallic anion ReMo(η⁵-C₅H₅)(μ-PPh₂)(CO)₆^? with iodine delivers opposite to the former reaction mainly the bridged isomer ReMo(η⁵-C₅H₅)(μ-PPh₂μ-I)(CO)₆ besides ReMo(η⁵-C₅H₅)(μ-PPh₂)(CO)₆I. The obtained complexes were characterized by means of v(CO) and ³¹P NMR spectroscopic measurements. Single-crystal analyses led to the subsequent metal—metal bond lengths: Re? Re of 308.0(1) pm in Re₂(μ-PCy₂)(CO)₈Br and Re? Mo of 313.6(1) pm in ReMo(η⁵-C₅H₅)(μ-PPh₂)(CO)₆I.