Alternative paths in the ring opening of oxadiaziridine: The diimide N-oxide versus the oxodiimide rearrangement

The ring opening of the oxadiaziridine by cleavage of the N-N bond has been theoretically investigated by SCF calculations improved with limited CI. The possible competition of this reaction with the better known ones (N-O bond cleavage, inversion of the N atom) is discussed. The chemical implications of the formation of a new type of 1,3-dipole are examined.     

Improving thermal and ozone stability of skim natural rubber by diimide reduction

The physical, chemical and thermal properties of diene-based polymers are improved by a chemical modification method such as hydrogenation. Skim natural rubber (SNR) which is mainly comprised of cis-1,4-polyisoprene was hydrogenated by diimide reduction in latex form, using hydrazine and hydrogen peroxide with copper sulfate as catalyst. The effect of various parameters on the level of hydrogenation calculated from proton nuclear magnetic resonance spectroscopy (¹H NMR) was investigated. The kinetic results indicated that the diimide hydrogenation of skim natural rubber latex (SNRL) exhibited a first order behavior with respect to the CC concentration. The apparent activation energy of the catalytic and non-catalytic hydrogenation of SNRL was calculated as 9.5 and 21.1 kJ/mol, respectively. From the TEM micrograph of hydrogenated SNRL particles, non-hydrogenated rubber core and hydrogenated rubber layer were observed according to a layer model. The results from thermal analysis confirmed that thermal stability of hydrogenated SNR was improved compared with the starting SNR. In addition, the thermal aging and ozone resistance of vulcanized hydrogenated SNR blends were also investigated.     

Alignment of Heptagonal Diimide and Triazine Enables Narrowband Pure-Blue Organic Light-Emitting Diodes with Low Efficiency Roll-Off

The endeavor to develop high-performance narrowband blue organic light-emitting diodes (OLEDs) with low efficiency roll-off represents an attractive challenge. Herein, we introduce a hetero-acceptor design strategy centered around the heptagonal diimide (BPI) building block to create an efficient thermally activated delayed fluorescence (TADF) sensitizer. The alignment of a twisted BPI unit and a planar diphenyltriazine (TRZ) fragment imparts remarkable exciton dynamic properties to 26tCz-TRZBPI, including a fast radiative decay rate (k_R) of 1.0×10⁷ s⁻¹ and a swift reverse intersystem crossing rate (k_RISC) of 1.8×10⁶ s⁻¹, complemented by a slow non-radiative decay rate (k_NR) of 6.0×10³ s⁻¹. Consequently, 26tCz-TRZBPI facilitates the fabrication of high-performance narrowband pure-blue TADF-sensitized fluorescence OLEDs (TSF-OLEDs) with a maximum external quantum efficiency (EQE_max) of 24.3 % and low efficiency roll-off even at a high brightness level of 10000 cd m⁻² (EQE₁₀₀₀₀: 16.8 %). This showcases a record-breaking external quantum efficiency at a high luminance level of 10000 cd m⁻² for narrowband blue TSF-OLEDs.     

聚甲基丙烯酸甲酯/聚(异戊二烯-co-苯乙烯)核壳纳米乳液的合成与直接氢化方法的研究

利用可控微乳液法合成粒径19~200 nm,且呈球状分布均匀的聚甲基丙烯酸甲酯/聚(异戊二烯-co-苯乙烯)(PMMA/PIS)核壳纳米粒子,通过水合肼产生原位氢的技术,对合成的PMMA/PIS乳液体系进行直接常压氢化,对影响氢化度的因素、聚合物氢化前后结构、热性能进行了研究.结果显示,聚合物粒径、水合肼及双氧水用量等都是影响聚合物的氢化度的因素.研究发现,氢化以PMMA为核,PIS为壳的核壳结构乳液可以显著提高PIS氢化程度,减少氢化过程中凝胶产生.利用FTIR、~1H-NMR、Na_2S_2O_3滴定法测定了乳液的氢化度.结果表明,当聚合物粒径小于200 nm时,乳液氢化度可达到95%以上,且无凝胶现象产生.GPC结果证明了反应是氢化而非凝胶过程.利用TEM、DLS测试了氢化后乳液的核壳结构和粒径.实验结果显示,PMMA/HPIS为核壳纳米结构.TGA结果显示,当氢化度为98%时,聚合物耐热性提高41°C.     

4,5,9,10‐Pyrene Diimides: A Family of Aromatic Diimides Exhibiting High Electron Mobility and Two‐Photon Excited Emission

The design and synthesis of high‐performance n‐type organic semiconductors are important for the development of future organic optoelectronics. Facile synthetic routes to reach the K‐region of pyrene and produce 4,5,9,10‐pyrene diimide (PyDI) derivatives are reported. The PyDI derivatives exhibited efficient electron transport properties, with the highest electron mobility of up to 3.08 cm² V⁻¹ s⁻¹. The tert‐butyl‐substituted compounds (t‐PyDI) also showed good one‐ and two‐photon excited fluorescence properties. The PyDI derivatives are a new family of aromatic diimides that may exhibit both high electron mobility and good light‐emitting properties, thus making them excellent candidates for future optoelectronics.     

Non-covalently dendronized flavins as organocatalysts for aerobic reduction of olefins

A variety of association complexes of synthetic flavin with diaminopyridine and melamine receptors are described in terms of synthesis, association properties, and catalytic activities for aerobic hydrogenation of olefins. The 1:1 association complex of lumiflavin 1 with 2,6-bis(acylamino)pyridine receptor bearing 3,4,5-trialkoxybenzyl ether dendron unit 2 acts as an efficient supramolecular organocatalyst for the aerobic reduction of styrene at ambient temperature under atmospheric air pressure.     

(6Z,9Z,12Z)-6,9,12-Octadecatriene and (3Z,6Z,9Z,12Z)-3,6,9,12-icosatetraene, the novel sex pheromones produced by emerald moths

(6Z,9Z,12Z)-6,9,12-Octadecatriene and (3Z,6Z,9Z,12Z)-3,6,9,12-icosatetraene, hydrocarbons unsaturated more highly than usual lepidopteran Type II pheromones, were identified from geometrid females of Hemithea tritonaria and Thalassodes immissaria intaminata, respectively. The triene was synthesized by a double Wittig reaction between hexanal and an ylide derived from (Z)-1,6-diiodo-3-hexene, and the tetraene was synthesized by a coupling between (Z)-3-undecenal and an ylide derived from (3Z,6Z)-1-iodo-3,6-nonadiene. Each synthetic compound attracted males of the corresponding emerald moths in a field.     

Unequal Perylene Diimide Twins in a Quadruple Assembly

Natural light-harvesting (LH) systems can divide identical dyes into unequal aggregate states, thereby achieving intelligent “allocation of labor”. From a synthetic point of view, the construction of such kinds of unequal and integrated systems without the help of proteinaceous scaffolding is challenging. Here, we show that four octatetrayne-bridged ortho-perylene diimide (PDI) dyads ( POP s) self-assemble into a quadruple assembly (POP)₄ both in solution and in the solid state. The two identical PDI units in each POP are compartmentalized into weakly coupled PDIs (P520) and closely stacked PDIs (P550) in (POP)₄ . The two extreme pools of PDI chromophores were unambiguously confirmed by single-crystal X-ray crystallography and NMR spectroscopy. To interpret the formation of the discrete quadruple assembly, we also developed a two-step cooperative model. Quantum-chemical calculations indicate the existence of multiple couplings within and across P520 and P550, which can satisfactorily describe the photophysical properties of the unequal quadruple assembly_. This finding is expected to help advance the rational design of dye stacks to emulate functions of natural LH systems.     

Fragment interaction analysis of structural problems in the framework ofAb initio SCF-MO computations

We describe here a procedure which allows to extend the application of the quantitative orbital interaction analysis at theab initio SCF-MO level to any kind of orbital interaction. In this new procedure a localization scheme is applied to the fragment MOs obtained with the procedure suggested by Wolfe et al. (JACS99, 1296 (1977)): in this way also the resulting σ-type fragment localized MOs have correct orbital occupancies and can be used for a PMO analysis. In addition the availability of quantitative expressions for the fragment localized MOs allows also to compute the total energy of the system in the absence of the orbital interactions under examination. For illustrative purposes the procedure is applied to the analysis of the factors which determine the preferential stability oftrans overcis diimide.     

Dissociation of diimide

Parts of the potential energy surface of N₂H₂ have been studied using CASSCF- and contracted CI-methods. Of particular interest was the concerted dissociation of cis- and trans-diimide into N₂ and H₂, since the trans-dissociation is symmetry allowed and the cis-dissociation forbidden. Three different saddle points were located, of which only one, of C ₂- symmetry, is a true transition state. Elaborate numerical gradient methods using exact Hessians and update procedures had to be used to find these saddle points on the unexpectedly complex N₂H₂-surface. The barrier height with respect to trans-diimide is 61 kcal/mol after vibration correction. Since this energy is higher than the barrier for interconversion, cis- and trans-diimide have the same transition state. It is further found that diimide preferably dissociates stepwise, by losing one hydrogen at a time, rather than in a concerted way. This conclusion is drawn basically because the geometry of the transition state for the concerted dissociation has a very long H-H distance of 5.6 a.u. The N-H bond energy in trans-diimide is 56 kcal/mol after vibration correction.