Ag/ZrO2催化剂上的1,2-丙二醇选择性气相氧化反应

采用浸渍法制备了一系列Ag/ZrO₂催化剂, 考察了Ag/ZrO₂催化剂对1,2-丙二醇选择性氧化合成丙酮醛反应的催化性能. 实验结果表明: 在原料气配比为V(N₂)∶V(O₂)＝300∶19, n(O₂)/n(alcohol)＝1.2, 反应物液时空速为3.2 g/(g•h), 反应温度为673 K时, 1,2-丙二醇选择性氧化合成丙酮醛反应的转化率为95.7%, 选择性为55.3%, 高于传统电解银催化剂. UV-Vis DRS和XPS的研究结果表明: 在Ag/ZrO₂催化剂上存在大量的Ag^＋和Ag_n^δ＋有利于促进催化活性的提高.     

Noble metal doped graphene nanocomposites and its study of photocatalytic hydrogen evolution

This work reports the deposition of platinum (Pt) nanoparticles on the surface of graphene nanosheet by a simple approach, using a microwave-assisted method. The photocatalytic activity has been investigated for hydrogen evolution. The hydrogen evolutions were attributed to graphene, due to its high photoelectron transport properties, and the Pt nanoparticles attached on the surface of graphene sheet, which act as reaction centers for H₂ evolution. The “as-prepared” composites were characterized by Brunauer Emmett Teller (BET) surface area measurement, X-ray diffraction (XRD), scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) analysis, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and UV–vis diffuse reflectance spectra (DRS). This work highlights the potential application of graphene-based materials in the field of energy conversion.     

Thermal behaviour of two anti-inflammatory drugs (celecoxib and rofecoxib) and slow relaxation dynamics in their amorphous solid state. Comparison between the dynamic fragility obtained by dielectric spectroscopy and by thermostimulated currents

This study of the thermal behaviour of two glass formers showed that rofecoxib has a good ability to vitrify while celecoxib displays a moderate glass forming ability. On the other hand, celecoxib forms an instable glass while rofecoxib displays moderate glass stability. The α-relaxation of the two amorphous drugs was studied by differential scanning calorimetry (DSC) and thermally stimulated depolarization currents (TSDC). The values of the dynamic fragility obtained by the two techniques are in good mutual agreement and suggest that both drugs are moderately fragile glass formers. These values are however considerably lower than those obtained by dielectric relaxation spectroscopy (DRS) and published in the literature. In the present work we will compare the values of the dynamic fragility obtained by TSDC and DRS for a set of ~30 glass-forming liquids, in order to evaluate their relative suitability for the determination of the m-index. The observed differences are discussed and interpreted. Finally, secondary mobility modes were detected by TSDC in both celecoxib and rofecoxib. The kinetic parameters are identical in both cases and similar to those found by DRS for the slow-b relaxation of celecoxib. These secondary relaxations, that are precursors of the main relaxation on its lower temperature side, are believed to be Johari-Goldstein relaxations.     

Evolution of Gold Species in an Au/CeO2 Catalyst and Its Impact on Activity for CO Oxidation

An Au/ceria(0.44%, mass fraction) catalyst containing gold ions was prepared by a modified deposition precipitation method, and the evolution of gold ions in the catalyst and its influence on the catalysis of CO oxidation were investigated. It was found that the as-prepared catalyst containing gold ions with high valence could fully oxidize CO at –10 °C initially but was deactivated gradually at low temperatures during the reaction with CO or treatment by unpurified air. The deactivation of the catalyst during CO oxidation or treatment of it by unpurified air was independent and progressive at low temperatures while the activity of the catalyst at relatively high temperatures was maintained well. During the reaction with CO or treatment by unpurified air, the XPS results indicate that gold species evolved from high valence to low valence and the diffuse reflectance UV-Vis spectra show that high valence gold was reduced to charged gold clusters, gold clusters grew to small gold crystals and small gold crystals grew to large gold particles. Accordingly, the high valence gold corresponded to the activity at low temperatures and the metallic gold was active and relatively stable at high temperatures. The turnover frequencies(TOF) of the catalysts treated by different methods at 273 K decreased with the evolution of gold species from high valence to low valence, no maximum of TOF was observed although gold particles in the catalyst attained to about 2―3 nm during the treatment. An Au/ceria catalyst with a gold load of 0.87% (mass fraction) maintained a good activity for CO oxidation within 18 h at room temperature. The catalysts were characterized via transmitted electronic microscopy(TEM), inductively coupled plasma optical emission spectrometry(ICP-OES), X-ray diffraction(XRD) and BET specific surface area and UV-Vis DRS as well.     

Tuning the properties of a black TiO2-Ag visible light photocatalyst produced by a rapid one-pot chemical reduction

A highly efficient black TiO₂-Ag photocatalytic nanocomposite, active under both UV and visible light illumination, was synthesized by decorating the surface of 25 nm TiO₂ particles with Ag nanoparticles. The material was obtained via a rapid, one-pot, simple (surfactant and complexing agent free) chemical reduction method using silver nitrate and formaldehyde as a metal salt and reducing agent, respectively. The nanocomposite shows an increase of over 800% in the rate of photocatalytic methylene blue dye degradation, compared to commercial unmodified TiO_2, under UV-VIS illumination. Unlike pure TiO₂, the nanocomposite exhibits visible light activation, with a corresponding drop in optical reflectance from 100% to less than 10%. The photocatalytic properties were shown to be strongly enhanced by post-reduction annealing heat treatments in air, which were observed to decrease, rather than coarsen, silver particle size, and increase particle distribution. This, accompanied by a variation in the silver surface oxidation states, appear to dramatically affect the photocatalytic efficiency under both UV and visible light. This highly active photocatalyst could have wide ranging applications in water and air pollution remediation and solar fuel production.     

Ion–Water Cooperative Interactions in Aqueous Solutions of MgCl2 by Dielectric Spectroscopy

The dielectric constant of aqueous MgCl₂ solution has been determined in the frequency range 0.2 MHz to 20 GHz at 298 K using the dielectric relaxation spectroscopy method. The behavior is well described according to four Cole-Cole terms whose evolution with composition is analyzed. The static dielectric constant and relaxation times decreases with the increasing aqueous MgCl₂ solution concentrations. Only one H-bonded water cluster with the aqueous MgCl₂ solution relaxes is reported during the cutoff relaxation time. A distinct ion–water cooperative interaction is observed, and water molecules perturbed by ion contribution on dielectric constant beyond the first hydration shell are obtained.     

Ag-TiO_2/KIT-6复合纳米光催化剂的研究

以有序介孔SiO2(简称KIT-6)为载体,采用钛酸丁酯水解法将纳米TiO2与KIT-6复合,并通过沉积沉淀法将纳米Ag粒子负载于其上,首次制得Ag-TiO2/KIT-6复合光催化剂,并采用相同的方法制备了一系列相关的催化剂.以光催化降解甲基橙来评价其催化性能,光催化活性顺序为Ag-TiO2/KIT-6＞Ag/TiO2＞TiO2/KIT-6＞TiO2＞Ag/KIT-6.利用XRD、N2物理吸附、XPS、UV-Vis DRS和TEM对系列催化剂进行表征,结果表明Ag-TiO2之间形成的异质结和催化剂的大比表面积是Ag-TiO2/KIT-6具有最高光催化活性的重要原因.其中Ag-TiO2之间的异质结结构,有效抑制了光生电子和光生空穴在TiO2表面和体相内部的复合,提高了光催化活性;此外Ag-TiO2/KIT-6的大比表面积大大提高了催化剂的吸附能力,增加了催化剂与污染物的接触,达到快速光催化降解污染物的目的.     

Mn5(PO3(OH))2(PO4)2(H2O)4的水热合成和光谱研究

在水热反应条件下合成出具有红磷锰矿结构的Mn5(PO3(OH) ) 2 (PO4 ) 2 (H2 O) 4单晶 ,在X ray单晶结构分析的基础上 ,对其固体紫外可见漫反射光谱、红外光谱、荧光光谱和热重光谱进行了研究。结果表明 ,构成该化合物的PO4 四面体及MnO6 八面体通过共顶点或共棱方式相连接 ,与P ,Mn配位的氧分为 3类 :即端基氧 (Od)、二桥氧 (Ob)和三桥氧 (Oc)。因而在 2 10和 2 5 0nm左右出现了Od→Mn和Ob ,c→Mn的荷移跃迁吸收谱带 ;在 10 0 0～ 110 0cm- 1 处 ,P—O的伸缩振动峰分裂为 3个 ;70 0～ 980cm- 1 处存在 3类Mn—O的伸缩振动。对标题化合物分别采用 2 18和 310nm的光激发 ,分别在 35 4和 4 13nm产生强而尖锐的荧光光谱发射峰 ,表现了很强的光学效应。热重分析表明该化合物在 2 70℃以下结构保持稳定 ,在 2 70～36 0℃范围内失去配位水。量化计算得单点能为 - 4 5 5 8 6 5 95 5 5 1a u ;前线轨道能量HOMO(Alpha) =- 0 2 80 80a u ,LOMO(Alpha) =0 0 15 2 7a u ,能隙为 0 2 96 0 7a u ;HOMO(Beta) =- 0 2 5 919a u ,LOMO(Beta)=0 0 0 10 8a u ,能隙为 0 2 6 0 72a u ;偶极矩为 4 2 0 82Debye。     

Effect of inorganic phase on polymeric relaxation dynamics in PMMA/silica hybrids studied by dielectric analysis

Dielectric relaxation spectroscopy was used to investigate the effect of the inorganic phase on the polymeric relaxation dynamics in PMMA/silica hybrids synthesized in situ via sol-gel processes. It was found that the large-scale molecular motions of PMMA were influenced by the addition of silica, inducing longer mean relaxation times, more heterogeneous relaxing environments and the higher activation energy. Explanations based on hydrogen-bond interactions between two phases and a fraction of entrapped chain segments in silica networks were proposed to understand the influence of the silica.     

Nanosized CeO2–SiO2, CeO2–TiO2, and CeO2–ZrO2 Mixed Oxides: Influence of Supporting Oxide on Thermal Stability and Oxygen Storage Properties of Ceria

The influence of SiO₂, TiO₂, and ZrO₂ on the structural and redox properties of CeO₂ were systematically investigated by various techniques namely, X-ray diffraction (XRD), Raman spectroscopy (RS), UV–Vis diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS), high-resolution transmission electron microscopy (HREM), BET surface area, and thermogravimetry methods. The effect of supporting oxides on the crystal modification of ceria was also mainly focused. The investigated oxides were obtained by soft chemical routes with ultrahigh dilute solutions and were subjected to thermal treatments from 773 to 1073 K. The XRD results suggest that the CeO₂–SiO₂ sample primarily consists of nanocrystalline CeO₂ on the amorphous SiO₂ surface. Both crystalline CeO₂ and TiO₂-anatase phases were noted in the case of CeO₂–TiO₂ sample. Formation of cubic Ce_0.75Zr_0.25O₂ and Ce_0.6Zr_0.4O₂ (at 1073 K) were observed in the case of CeO₂–ZrO₂ sample. The cell ‘a’ parameter estimations revealed an expansion of the ceria lattice in the case of CeO₂–TiO₂, while a contraction is noted in the case of CeO₂–ZrO₂. The DRS studies suggest that the supporting oxides significantly influence the band gap energy of CeO₂. Raman measurements disclose the presence of oxygen vacancies, lattice defects, and displacement of oxide ions from their normal lattice positions in the case of CeO₂–TiO₂ and CeO₂–ZrO₂ samples. The XPS studies revealed the presence of silica, titania, and zirconia in their highest oxidation states, Si(IV), Ti(IV), and Zr(IV) at the surface of the materials. Cerium is present in both Ce⁴⁺ and Ce³⁺ oxidation states. The HREM results reveal well-dispersed CeO₂ nanocrystals over the amorphous SiO₂ matrix in the case of CeO₂–SiO₂, isolated CeO₂ and TiO₂ (A) nanocrystals and some overlapping regions in the case of CeO₂–TiO₂, and nanosized CeO₂ and Ce–Zr oxides in the case of CeO₂–ZrO₂ sample. The exact structural features of these crystals as determined by digital diffraction analysis of HREM experimental images reveal that the CeO₂ is mainly in cubic fluorite geometry. The oxygen storage capacity (OSC) as determined by thermogravimetry reveals that the OSC of mixed oxides is more than that of pure CeO₂ and the CeO₂–ZrO₂ exhibits highest OSC.