Analysis of cyanobacterial toxins by hydrophilic interaction liquid chromatography-mass spectrometry

The combination of hydrophilic interaction liquid chromatography with electrospray mass spectrometry (HILIC-MS) has been investigated as a tool for the analysis of assorted toxins produced by cyanobacteria. Toxins examined included saxitoxin and its various analogues (1-18), anatoxin-a (ATX-a, 19), cylindrospermopsin (CYN, 20), deoxycylindrospermopsin (doCYN, 21), and microcystins-LR (22) and -RR (23). The saxitoxins could be unequivocally detected in one isocratic analysis using a TSK gel Amide-80 column eluted with 65% B, where eluent A is water and B is a 95% acetonitrile/water solution, both containing 2.0 mM ammonium formate and 3.6 mM formic acid. The analysis of ATX-a, CYN and doCYN required 75% B isocratic. Simultaneous determination of 1-21 was also possible by using gradient elution. HILIC proved to be suitable for the analysis of microcystins, but peak shape was not symmetric and it was concluded that these compounds are best analysed using existing reversed-phase methods. The HILIC-MS method was applied to the analysis of field and cultured samples of Anabaena circinalis and Cylindrospermopsis raciborskii. In general, the method proved quite robust with similar results obtained in two different laboratories using different instrumentation.     

Analysis of cyanobacterial toxins (anatoxin-a, cylindrospermopsin, microcystin-LR) by capillary electrophoresis

Capillary zone electrophoresis (CZE) and micellar electrokinetic chromatography (MEKC) were applied to the simultaneous separation of cyanobacterial toxins (anatoxin-a, microcystin-LR, cylindrospermopsin). The analytical performance data of both methods, optimized for the three toxins, were similar with a precision of migration times smaller than 0.8 RSD% and a detection limit in the range of 1-4 microg/mL, using spectrophotometric detection at 230 nm. Both methods were applied to an analysis of cyanotoxins in water bloom samples and crude cyanobacterial extracts. The results obtained indicate that, for complex matrices, the sequential application of CZE and MEKC is necessary. It is recommended to use both CE techniques for the analysis of the same sample in order to confirm the results by an orthogonal approach.     

Cylindrospermopsin determination using 2-[4-(2-hydroxyethyl)-1-piperazinyl]ethanesulfonic acid (HEPES) as the internal standard

Cylindrospermopsin (CYN) was determined by liquid chromatography/electrospray ionization-mass spectrometry (LC/ESI-MS) using 2-[4-(2-hydroxyethyl)-1-piperazinyl]ethanesulfonic acid (HEPES) as the internal standard. In the selected ion monitoring of LC/ESI-MS, m/z 414 for CYN and 237 for HEPES were monitored using the negative mode; the retention times of CYN and HEPES were 12.41 and 14.21 min, respectively. CYN was determined from peak area ratios of m/z 414/237. By the treatment of an anion exchange cartridge using a buffer at pH 10.5, CYN was isolated and condensed. No interfering peak was observed. Linearity of this method was observed at the range of 0.10-31.12 ng. Total coefficients of variation were 5.1 and 2.9% at 104 and 1038 μg CYN L⁻¹. The quantitative limit at a signal-to-noise (S/N) ratio of 10 was 0.16 ng.CYN concentration in natural waters is low. CYN in waters should be condensed for determination. This method including the treatment for isolation and condensation of CYN is useful for determination of CYN in environmental and/or drinking waters.     

4‐Aminothiophenol Self‐Assembled Monolayer for the Development of a DNA Biosensor Aiming the Detection of Cylindrospermopsin Producing Cyanobacteria

The development of a DNA biosensor for the detection of cylindrospermopsin, based on self‐assembled monolayers (SAMs) of 4‐aminothiophenol, is investigated. SAMs were characterized by electrochemical reductive desorption. Detection of probe immobilization and hybridization has been achieved by cyclic and square‐wave voltammetry (SWV), using methylene blue (MB) as electroactive indicator. The SWV data obtained in phosphate buffer, with and without NaCl, after MB accumulation, revealed an increase of the redox indicator current peaks after the hybridization step. This behavior is consistent with MB intercalation into DNA, for high ionic strength media and attributed to electrostatic interactions in the absence of salt. Evidence for surface modification is also provided by atomic force microscopy and ellipsometry.     

Target-selective ion-exchange media for highly hydrophilic compounds: a possible solution by use of the “interval immobilization technique”

We prepared a crosslinked polymer as a separation and/or adsorption medium for CYN, as shown in Fig. 1. The polymers were evaluated by high-performance liquid chromatography (HPLC) and adsorption was examined under batch conditions. Results from detailed HPLC evaluation and measurement of the difference between the binding affinity for CYN and for other compounds showed the prepared polymer had specific recognition ability for CYN.