Carbon-13 NMR evidence for cocrystallization of cellulose as a mechanism for hornification of bleached kraft pulp

Solid-state ¹³C NMR spectroscopy was used to characterize a bleached softwood kraft pulp in the never-dried state and after cycles of drying and remoistening. Changes in NMR signal strengths indicated that growth of crystalline domains involved cocrystallization rather than accretion of cellulose from noncrystalline domains. A cluster of C-4 signals at 89.4 ppm, assigned to the interiors of crystalline domains, grew at the expense of C-4 signals at 84.0 and 84.9 ppm, assigned to the well-ordered surfaces of crystalline domains. Irreversible changes were not detected until the moisture content dropped below 18%. They were enhanced by a second drying/remoistening cycle, but showed little further change on subsequent cycles. The necessary conditions resembled those reported for hornification, suggesting that cocrystallization might provide a mechanism for hornification.     

Synthesis and structures of nitroxyalkyl methylphosphonates

The reactions of ethylene glycol mononitrate and glycerol 1,3-dinitrate with methylphosphonic dichloride afforded new nitroxyalkyl methylphosphonates.     

Photoluminescence activity of Yang and Secco etched multicrystalline silicon material

Ultraviolet and blue-green photoluminescence (PL) was investigated on multicrystalline silicon (mc-Si) samples chemically etched by Secco and Yang solutions. The samples were characterized by dislocation density (10⁵-10⁶ cm⁻²). The form of etched pits is triangular with Yang etch and like a honeycomb with Secco etch as observed with a scanning electron microscope (SEM). These textures of mc-Si wafers give a PL activity similar to that obtained with nanostructures of porous silicon (PS) as reported in the literature. The ultraviolet PL spectra observed with Yang etch shift to the blue-green spectrum range when applying Secco etch. In our experiments we have observed 3-5 μm diameter macro pores separated by a high density of nanowalls. These observations suggest that the origin of the PL activity are quantum dots resulting from the silicon nanocrystallites obtained after few minutes of chemical etching.     

Liquid phase oxidation of p-chlorotoluene to p-chlorobenzaldehyde over cobalt-doped mesoporous titania with a crystalline framework

Cobalt-doped mesoporous titania with a crystalline framework synthesized by surfactant templating method presented highly selective (99%) and reasonable conversion rate (49%) of catalytic oxidation of para-chlorotoluene to para-chlorobenzaldehyde in acetic acid using aqueous hydrogen peroxide as oxidant for the first time. Recycling of the catalyst indicates that the catalyst can be used a number of times without losing its activity to a greater extent. By contrast, cobalt-doped mesoporous titania without a crystalline structure and cobalt doped the commercial titania, Degussa P25 prepared by impregnation method with the similar concentration of cobalt were found inactive. The effects of catalyst concentration, reaction time, reaction temperature, and solvents on the performance of the catalyst were also investigated.     

正丁基苝四羧酸二酰亚胺的晶型和性能研究

文章合成了N,N'-二正丁基苝四羧酸二酰亚胺,并纯化、调晶,进行了IR、元素分析、X射线等测定.分析该化合物在DMF中的紫外光谱(最大吸收波长524.80 nm)、荧光光谱(最大发射波长539.0 nm)、Stokes位移(数值15 nm)等光谱性质.在400～700 nm范围内,α晶型薄膜紫外-可见吸收出现很强的吸收峰,且由β型变为α型,最大吸收波长有明显的红移(545 nm变为580 nm).X射线粉末衍射也反映出α晶型的2θ在26.0°处衍射峰CPS为2 508,β型在25.2°为1 891.α,β晶型作为电荷产生材料制得的功能分离型有机光导体,在光源滤波波长λ=532 nm曝光下,测得含α,β感光体达到饱和电位的时间分别为46,93.98 s,光衰电位(5.3千伏电压负充电电晕,1～2 s后的表面电位)分别为727和525 V,半衰曝光量分别为4.32,4.34μJ·cm-2,残余电位分别为30和45 V等光导性能数值.     

结晶聚合物的中间层

介绍了结晶聚合物中间层概念及各种实验技术所提供的中间层存在的证据。附25篇参考文献。     

~(19)F-NMR法测定聚醚多元醇中伯羟基的相对含量

<正> 聚醚多元醇是聚氨酯材料的主要原料之一.多元醇中伯羟基含量的多少对反应活性有着直接的影响,因此,准确地测定伯羟基含量已成为许多研究者关心的课题,并已报道了不少测定方法,其中主要包括化学动力学方法、~1H-核磁共振(NMR)法和~(19)F-NMR法,~1H-NMR法系利用不同的酰化剂,将聚醚多元醇酰化后测其酰化物的~1H-NMR谱,从伯、仲羟基相应的酯基氢的积分比例来计算伯羟基的相对含量,但由于体系中存在其它含氢基因,且是大量的,使测量困难或应用受到限制.~(19)F-NMR法测伯羟     

晶性3，4－聚异戊二烯的结构研究

采用ＷＡＸＤ、ＳＡＸＳ和Ｘ－射线平板照相法研究了不同聚合条件和拉伸倍数下的晶性３，４－聚异戊二烯的结构．结果发现，降低催化体系反应速度有利于产物结晶；不同的含氮类给电子试剂对聚合物的结晶结构影响较大．取向样品随着拉伸倍数的增加结晶度和长周期增大，微晶尺寸变小．ＳＡＸＳ的散射强度计算表明，该聚合物属多分散非均一粒子体系，微孔半径在３．５－１６．４ｎｍ间．     

共聚酯型热熔粘结纤维结晶结构及其熔融行为

采用DSC与WAXD相结合的方法研究了两个系列的无规嵌段共聚酯型热熔粘结纤维的结晶结构并探讨了系列样品的熔融行为.实验表明,以最低熔融温度为界,可将样品分为两组,每组只含一种可结晶单元的结晶.其结构与物理机械性质随该可结晶单元的加入量而有规律的变化.纤维的粘结性能则取决于非晶区结构,非晶区分子链柔性增加,会明显改善粘结效果.     

Excess enthalpies of aqueous ternary solutions of urea and polyols at 25°C

The heats of dilution of nine ternary solutions of urea and polyols have been determined at 25°C. Excess enthalpies and their virial coefficients h _xy have been evaluated and compared with the data reported in the literature for mono- and polyfunctional alcohols and other oxygenated nonelectrolytes. The group additivity approach of Savage and Wood was applied and the contributions to the enthalpy coefficients, due to the water mediated interactions between urea and the functional groups –CH₂–, –OH, and –O– were determined. On the other hand, by using empirical combination rules among the cross- and self-enthalpic interaction coefficients it is possible to emphasize the large differences in the behavior (even in the presence of urea) of the polyols (and in particular of cyclitols) and of saccharides.