幅相一致行波管高频电路CAD研究

 在行波管的设计和装配过程中，各部件的尺寸必须严格控制，高频电路参数的离散对行波管色散特性有极大的影响。使用螺旋导电面模型，模拟计算了高频结构各主要参数离散对色散特性和轴向互作用耦合阻抗的影响。分析计算了夹持杆宽度、翼片高度、螺旋线平均半径、螺距、夹持杆介电常数等离散时对色散特性和轴向互作用耦合阻抗的影响，为新型幅相一致行波管的设计和生产提供了很有价值的参考建议。     

横向射流式单重态氧发生器的性能实验研究

 对氧碘化学激光器的单重态氧发生器（SOG）进行了改进，采用横向射流方式，并对该横向射流式单重态氧发生器的性能进行了检测。实验中过氧化氢碱溶液温度控制在－16℃左右,氯气流量为530mmol/s，He与氯气的流量比为3;采用PS法测量单重态氧分子的产率,吸收法测量氯气的利用率和相对水含量。得出如下结论:在不使用冷阱和分离器的情况下，最高单重态氧分子产率达到58%, 氯气利用率在80%以上,相对水含量小于等于0.5;气体达到最大流量时,发生器仍然能稳定地工作。     

与q形变玻色算符逆算符相关的相干态及其量子统计性质

讨论了ｑ形变玻色算符的广义逆算符作用于ｑ－相干态所得到的两类量子态的数学及量子统计性质。结果表明，ｑ－相干态的光子激发态不存在压缩但呈现反聚束效应，而ｑ－相干态的光子湮灭态却存在压缩但不呈现反聚束效应。     

微波消解ICP-AES法同时测定花岗石中铜、镉、铬和砷

本文采用微波消解和ICP－AES法，同时测定花岗石样品的铅、镉、铬、砷4有害元素，检出限分别为0．0008、0．0007、0．0018、0．0012μg.mL^-1,回收率为93．4％－102．5％，RSD为1．3％－3．6％，该法准确、快速、简便，结果令人满意。     

Magnetic anisotropy of textured CrO2 thin films investigated by X-ray magnetic circular dichroism

Highly a-axis-textured CrO₂ films have been deposited on Al₂O₃ (0001) substrates by chemical vapor deposition. CrO₂ has been found to have highly a-axis (010)-oriented columnar growth on a Cr₂O₃ (0001) initial layer. The six-fold surface symmetry of the Cr₂O₃ initial layer leads to three equivalent in-plane orientations of the a-axis-oriented CrO₂ unit cell. We report Cr L_2,3 X-ray magnetic circular dichroism data along the surface normal and at 60° off-normal sample orientation. For a 60° sample alignment, a strong increase of the projected orbital moment could be observed for unoccupied majority t_2g states using moment analysis. Therefore, the c axis is identified as the intrinsic magnetic easy axis of CrO₂. In addition, a small spin moment and a very strong magnetic dipole term T_z have been found. Received: 8 January 2002 / Accepted: 8 January 2002     

Magnetic Properties of Metallic Multilayered Systems

Hyperfine Interactions - The giant magnetoresistance (GMR) effect was an epoch-making discovery in the field of magnetic materials research. In this article, studies on magnetic multilayered...     

轻型汽车后桥半轴断裂件的组织及断口特征

采用光学显微镜和扫描电子显微镜等手段，对某轻型汽车40Cr后桥半轴断裂件的组织及断口特征进行了分析结果表明：半轴在调质处理时的淬火温度不够高，使其表层和心部组织中存在较多的铁素体相，造成了工件最终的硬度和疲劳强度不足，导致半轴在使用中发生扭转疲劳断裂．     

Cr^4＋：YAG可饱和吸收特性测量

测量了Cr4+:YAG材料的可饱和吸收特性,用多种数据分析方法处理了实验结果,Cr4+:YAG的基态吸收截面σgs=11×10-19cm2,激发态吸收截面σes=1.2×10-19cm2。     

Size of the interpolated cation and hole carrier density: two key parameters for the optimisation of colossal magnetoresistive properties of Pr-based manganites

The exploration of the magnetic and transport properties of four series of manganese perovskites, Pr_0.7Ca_0.34−xA_xMnO_3−δ (A=Sr, Ba), Pr_0.7−xLa_xCa_0.3 MnO_3−δ and Pr_0.66Ca_0.34−x Sr_xMnO_3−δ has allowed four phases with colossal magnetoresistive (CMR) properties to be isolated: Pr_0.7Ca_0.25Sr_0.025MnO_3−δ and Pr_0.66Ca_0.26Sr_0.08MnO_3−δ that exhibit a variation of resistance of 2.5. 10⁷% and 10⁹% at μ₀ H=5 T for T=88 K and 50 K respectively, Pr_0.58La_0.12Ca_0.3 MnO_3−δ that exhibits a variation of 6.10⁶% for μ₀ H=5 T at T=80 K and Pr_0.7Ba_0.025Ca_0.275MnO_3−δ for which a resistance variation of 5.10⁹%, at T=50 K, for μ₀ H=5 T is evidenced. for each compound of this series except the barium phase, one observes that the temperature T_max, which corresponds to the resistance maximum on the R(T) curves in zero magnetic field, increases dramatically as the mean size of the interpolated cations increases, and that the CMR effect correlatively decreases dramatically. The comparison of the two series Pr_0.7Ca_0.3−xSr_xMnO_3−δ and Pr_0.66Ca_0.34−xSr_xMnO_3−δ shows also the crucial role of the hole carrier density: for a same mean ionic radius of the interpolated cation T_max is decreased of about 50 K by introducing 0.034 hole per Mn mole.     

Cr^4＋：YAG,Cr^4＋：Mg2SiO4近红外荧光辐射温度特性研究

测量了Ｃｒ＾４＋，ＹＡＧ、Ｃｒ＾４＋，Ｍｇ２ＳｉＯ４晶体在室温和液氮温度下的荧光光谱，吸收光谱和激发态寿命，讨论了温度变化时，两种晶体中Ｃｒ＾４＋近红外辐射积分强度变化与激光发态寿命变化的关系，得出结论：在７７Ｋ￣３００Ｋ范围内，Ｃｒ＾４＋的＾３Ｔ２能级荧光辐射截面本身受温度影响不大，Ｃｒ＾４＋辐射荧光的变化，主要是由无辐射弛豫速率随温度变化而引起的。