Terpolymers from Borane‐Initiated Copolymerization of Triphenyl Arsonium and Sulfoxonium Ylides: An Unexpected Light Emission

The first synthesis of well‐defined poly[(phenylmethylene‐co‐methylpropenylene)‐b‐methylene, [(C1‐co‐C3)‐b‐C1], terpolymers was achieved by one‐pot borane‐initiated random copolymerization of ω‐methylallyl (C3 units, chain is growing by three carbon atoms at a time) and benzyltriphenylarsonium (C1 units, chain is growing by one carbon atom at a time) ylides, followed by polymerization of sulfoxonium methylide (C1 units). Other substituted arsonium ylides, such as prenyltriphenyl, propyltriphenyl and (4‐fluorobenzyl)triphenyl can also be used instead of benzyltriphenylarsonium. The obtained terpolymers are well‐defined, possess a predictable molecular weight and low polydispersity (M_n,NMR=1.83–9.68×10³ g mol^?1, ?=1.09–1.22). An unexpected light emission phenomenon was discovered in these non‐conjugated terpolymers, as confirmed by fluorescence and NMR spectroscopy. This phenomenon can be explained by the isomerization of the double bonds of allylic monomeric units along the chain of the terpolymers (isomerization‐induced light emission).     

Tuning the Reactivity of Cyclopropenes from Living Ring‐Opening Metathesis Polymerization (ROMP) to Single‐Addition and Alternating ROMP

Ring‐opening metathesis polymerization (ROMP) has become one of the most important living polymerizations. Cyclopropenes (CPEs) remain underexplored for ROMP. Described here is that the simple swap of 1‐methyl to 1‐phenyl on 1‐(benzoyloxymethyl)CPEs elicited strikingly different modes of reactivity, switching from living polymerization to either selective single‐addition or living alternating ROMP. The distinct reactivity stems from differences in steric repulsions at the Ru alkylidene after CPE ring opening. Possible olefin or oxygen chelation from ring‐opened CPE substituents was also observed to significantly affect the rate of propagation. These results demonstrate the versatility of CPEs as a new class of monomers for ROMP, provide mechanistic insights for designing new monomers with rare single‐addition reactivity, and generate a new functionalizable alternating copolymer scaffold with controlled molecular weight and low dispersity.     

Palladium complexes with meso-bioxazoline ligands for alternating styrene/CO copolymerisation: Counterion effect

Two sets of mono- and dicationic palladium complexes (8) and (10), having and as counterions, were synthesised. The interionic structure of the methyl-acetonitrile complexes [Pd((R,S)-Bn-Box)(CH₃)(NCCH₃)](X) (8) in solution, was investigated by pulsed-gradient spin-echo (PGSE) diffusion measurements and (¹H, ¹⁹F)-HOESY NMR spectroscopy. A high degree of ion-pairing was found in each complex. The HOESY spectra showed that the and anions take up selective positions, on the side of the complex remote from the benzyl groups, but close to the acetonitrile ligand, while the triflate is, partially, occupying a pseudo fifth coordination position on the side of the cation remote from the two benzyl-groups. The complexes 8 and 10 were used as catalyst precursors for the copolymerisation of styrene with carbon monoxide, producing syndiotactic copolymers, with the exception of complex 10a, that led to isotactic copolymers.     

Stereoselective Copolymerization of Unprotected Polar and Nonpolar Styrenes by an Yttrium Precursor: Control of Polar‐Group Distribution and Mechanism

Styrene underwent unprecedented coordination–insertion copolymerization with naked polar monomers (ortho ‐/meta ‐/para ‐methoxystyrene) in the presence of a pyridyl methylene fluorenyl yttrium catalyst. High activity (1.26×10⁶ g mol_Y⁻¹ h⁻¹) and excellent syndioselectivity were observed, and high‐molecular‐weight copolymers (24.6×10⁴ g mol⁻¹) were obtained. The insertion rate of the polar monomers could be adjusted in the full range of 0–100 % simply by changing the loading of the polar styrene monomer. Strikingly, the copolymers had tapered, gradient, and even random sequence distributions, depending on the position of the polar methoxy group on the phenyl ring and thus on its mode of coordination to the active metal center, as shown by tracking the polymerization process and DFT calculations.     

Organic–Inorganic Copolymerization for a Homogenous Composite without an Interphase Boundary

Ionic oligomers and their crosslinking implies a possibility to produce novel organic–inorganic composites by copolymerization. Using organic acrylamide monomers and inorganic calcium phosphate oligomers as precursors, uniformly structured polyacrylamide (PAM)-calcium phosphate copolymer is prepared by an organic–inorganic copolymerization. In contrast to the previous PAM-based composites by mixing inorganic components into polymers, the copolymerized material has no interphase boundary owing to the homogenous incorporation of the organic and inorganic units at molecular level, resulting in a complete and continuous hybrid network. The participation of the ionic binding effect in the crosslinking process can substantially improve the mechanical strength; the copolymer can reach a modulus and hardness of 35.14±1.91 GPa and 1.34±0.09 GPa, respectively, which are far superior to any other PAM-based composites.     

Reversible Transformation between Amorphous and Crystalline States of Unsaturated Polyesters by Cis–Trans Isomerization

An aliphatic polyester has been prepared from ethylene oxide and maleic anhydride that undergoes reversible transformation between amorphous (T_g=18 °C) and crystalline (T_m=124 °C) states through cis–trans isomerization of the C=C bonds in the polymer backbone without any change in either the molecular weight or dispersity of the polymer. A similar transformation was also observed in chiral unsaturated polyesters formed from enantiopure terminal epoxides, such as epichlorohydrin, phenyl glycidyl ether, and (2,3‐epoxypropyl)benzene. These unsaturated polyesters with 100 % E‐configuration in the crystalline state were prepared by quantitative isomerization of their Z‐configuration analogues in the presence of a catalytic amount of diethylamine, while in the presence of benzophenone, irradiation with 365 nm UV light resulted in the transformation of about 30 % trans‐alkene to cis‐maleate form, thereby affording amorphous polyesters.     

Titanium ketimide complexes as α-olefin homo- and copolymerisation catalysts. X-ray diffraction structures of [TiCp(NCBu2)Cl2] (Cp=Ind, Cp*)

The synthesis of [TiInd(NC^tBu₂)Cl₂] and the applications of [TiCp^′(NC^tBu₂)Cl₂] (Cp^′=Ind, Cp*, Cp) as ethylene and propylene homopolymerisation catalysts, as well as its behaviour as catalysts of ethylene and 10-undecen-1-ol copolymerisation are described. The optimisation of the catalytic reactions showed that all compounds are very active homopolymerisation catalysts, particularly [TiInd(NC^tBu₂)Cl₂] that gives 123.37 × 10⁶ g/(molTi [E] h) and 50.77 × 10⁶ g/(molTi [P] h) of linear polyethylene and atatic polypropylene, respectively. The less active homopolymerisation catalyst, [TiCp(NC^tBu₂)Cl₂], is the most effective ethylene/10-undecen-1-ol copolymerisation catalyst, leading to the highest degree of polar monomer incorporation. The polymers obtained were characterised by NMR and DSC. The molecular structures of [TiCp^′(NC^tBu₂)Cl₂] (Cp^′=Ind, Cp*) were determined by X-ray diffraction studies.     

Radical solution copolymerisation of vinylidene fluoride with hexafluoropropene

The radical copolymerisation in solution of vinylidene fluoride (or 1,1-difluoroethylene (VDF)) with hexafluoropropylene (HFP) initiated by di-tert-butyl peroxide is presented. A series of eight copolymerisation reactions was investigated with initial [VDF]_o/[HFP]_o molar ratios ranging from 5.0/95.0 to 85.2/14.8. Both co-monomers copolymerised in this range of copolymerisation. Moreover, only VDF homopolymerised in these conditions. The copolymer compositions of these random-type copolymers were calculated by means of ¹⁹F NMR spectroscopy which allowed the respective amount of each monomeric unit in the copolymer to be quantified. The Tidwell and Mortimer method led to the assessment of the reactivity ratios, r_i, of both co-monomers showing a higher incorporation of VDF in the copolymer (r_HFP = 0.12 ± 0.05 and r_VDF = 2.9 ± 0.6 at 393 K). Alfrey-Price's Q and e values of HFP were calculated to be 0.002 (from Q_VDF = 0.008) or 0.009 (from Q_VDF = 0.015) and +1.44 (versus e_VDF = 0.40) or +1.54 (versus e_VDF = 0.50), respectively, indicating that HFP is an electron-accepting monomer. The thermal properties of these fluorinated copolymers were also determined. Except for those containing a high amount of VDF, they were amorphous. Each showed one glass transition temperature (T_g) only, and from known laws of T_g, that of the homopolymer of HFP was assessed. It was compared with that obtained from the literature after extrapolation and is discussed.