UPML formulation for truncating conductive media in curvilinear coordinates

This work presents a formulation based on UPML for truncating conductive media by using a local and non-orthogonal coordinate system to solve Maxwell’s equations by the FDTD method. The detailed procedure for obtaining the UPML equations for this case is shown and the complete equation set is provided.     

LaxBa1—xCoO3系导电陶瓷导电性研究

对ＬａｘＢａ１－ｘＣｏＯ导电陶瓷的导电性及其导电机制进行了研究，在ｘ＝０．５ｍｏｌ处，导电陶瓷具有金属态导是性，在Ｌａ０．５Ｂａ０．５ＣｏＯ３陶瓷中，存在着氧缺位和导电电子，并且此种导电陶瓷具有较高的电子和氧离子混合导电特性。     

A conductive elastomer based on EPDM and polyaniline: II. Effect of the crosslinking method

Electrically conductive heterogeneous binary polymer blends based on ethylene-propylene-diene-monomer (EPDM) and polyaniline (PAni) were prepared in a Haake Rheocord 90 rheometer, coupled with an internal mixer (counter rotating cam rotors) using different amounts of PAni doped with dodecylbenzenosulfonic acid (DBSA). Blends were crosslinked using two methods: (i) phenolic resin (SP-1045) as crosslinking agent and (ii) electron beam irradiation. The last method avoids the interference of the acid dopant in the crosslinking process and produces blends with higher conductivity.     

碳纳米管/高分子复合导电材料的研究进展

从碳纳米管的电性质出发,对以它为填料的导电性复合材料的制备方法和研究进展进行了综述,同时简单介绍了导电性复合材料电性质转变现象的理论分析模型,最后对碳纳米管/高分子复合导电材料的研究前景作了一定探讨。     

聚苯胺复合材料研究进展

综述了聚苯胺/无机物复合材料和聚苯胺/有机高聚物复合材料的合成方法，性能特征，并展望了聚苯胺复合材料的研究，应用前景。     

Electrocatalytic Properties of a Novel Poly‐1‐Naphthylamine‐Modified Electrode Using Ascorbic Acid as Molecule Probe

A glassy carbon electrode was modified with an electropolymerized film of 1‐naphthylamine in aqueous solution. The electrocatalytic properties of this modified electrode (ME) were investigated using ascorbic acid (AA) as probe molecule. The electrochemical behavior of AA in buffer solution was examined by voltammetry and amperometry. The results showed that the ME exhibited good electrocatalytic activity towards the oxidation of AA, as a consequence, it can be used as amperometric sensor of this analyte in a flow injection system with good sensitivity. Calibration curves were linear over the concentration range 0.05–1.50 mM with a phosphate buffer solution pH 3 as the carrier, the detection limit was 1 ppm (S/N=3). The methods were applied to the determination of AA in beverages and pharmaceutical products. A good correlation with a reference method was attained.     

聚丙烯腈表面金属化新方法的研究

以硼氢化钠（ＮａＢＨ４）水溶液还原聚丙烯腈（ＰＡＮ）／金属盐络合膜后，就可得到一种新的高分子表面金属化材料．其导电性能较好，表面电阻约为１０－１～１０Ω／□通过ＵＶ、ＩＲ等分析手段证实了在高聚物和金属离子之间存在络合作用。研究了影响表面电阻的因素。通过电镜和测量还原率、电子探针微区分析，证实了还原过程中存在离子迁移     

Microfabricated ISEs: critical comparison of inherently conducting polymer and hydrogel based inner contacts

A rigorous side by side comparison of miniature planar potassium-selective electrodes with hydrogel and potassium hexacyanoferrate(II)/(III) doped polypyrrole (PPy/FeCN) based inner contacts is presented. The planar electrodes were manufactured by screen printing as four- and five-site arrays on ceramic substrates. These electrode arrays were incorporated into a flow-through cell, which could accommodate nine electrode sites. Two identical flow cells were connected in series and the effect of the inner contacts on the analytical performance of the respective electrodes has been critically evaluated. The time necessary to reach steady state conditions has been determined and the effect of experimental parameters (temperature, ambient light intensity, CO₂, and O₂ concentration of the sample) on the potential stability of the electrodes was analyzed. At controlled temperature, the drift of the planar potassium electrodes with hydrogel and PPy/FeCN solid contact were 0.11±0.02 mV h⁻¹ and 0.03±0.007 mV h⁻¹, respectively. The experimental data proved that there is no aqueous film formation between the PPy/FeCN film and the potassium-selective solvent polymeric membrane.     

聚并硒吩导电高聚物的电子结构及其掺杂导电机制的探究

聚并硒吩导电高聚物的电子结构及其掺杂导电机制的探究徐龙君，林宪杰（重庆大学化学系，重庆６３００４４）（菏泽师专化学系，菏泽２７４０１５）王荣顺（东北师大化学系，长春１３００２４）关键词：硒吩，导电高聚物，ＥＨＭＯ。聚并硒吩包括聚吡咯并［３．２－ｂ］硒...     

Continuous,single-component,crystalline networks in polymer matrix and their vapor doping

It is shown, for the first time, that single-component continuous networks of a low molecular weight electron acceptor additive can be grown in a polymer matrix. Such networks can be doped using, e.g., iodine vapor and converted into conductive CT complexes without losing continuity, thereby making the polymer film conductive. Polyethylene films with tetrathiotetracene networks are obtained, and their doping with iodine vapor in air is investigated by means of conductivity and spectrophotometry in the visible range. It is concluded that doping of the surface layer of the microcrystallites is sufficient to observe a significant increase in the film conductivity, which makes possible the use of such systems as sensors.