RPS增容LDPE／PS研究

用ＨＡＡＫＥ、ＤＳＣ、ＩＲ等方法研究了侧基含有过氧键的反聚苯乙烯与ＬＤＰＥ之间的反应，并将其应用到ＬＤＰＥ／ＰＳ共混体系。考察了不同添加方式，交联助剂等对共混物力学性能、流变性能及微观结构的影响。     

最有效的相容剂是两嵌段还是多嵌段聚合物？

采用Monte Carlo模拟方法研究了多嵌段聚合物在A／B／嵌段聚合物三组份体系作为相容剂使用的有效性．占总体积19％的A组份在体系中为分散相．模拟结果显示了两嵌段和多嵌段聚合物在界面上的聚集行为,以及如何影响这个不相容体系的相形为．两嵌段聚合物趋于直立在相界面上,而多嵌段聚合物更容易横跨在相界面上并占据较大的界面积．从而导致多嵌段聚合物更有效的阻止体系相分离的发生．     

Study and characterization of virgin and recycled LDPE/PP blends

Recycling of mixed plastic wastes composed of low-density polyethylene (LDPE) matrix and polypropylene (PP) was carried out by compounding using single-screw or twin-screw extruders. Blends of virgin polymers have been prepared to compare mechanical properties of both virgin and regenerated materials. First, a model composition of virgin LDPE/PP blend was prepared to study the effect of process parameters and that of different types of compatibilizers. Second, the results were applied to plastic wastes coming from industrial post-consumer plastic wastes. By adding compatibilizing agents such as ethylene-propylene-diene monomer, ethylene-propylene monomer, or PE-g-(2-methyl-1,3-butadiene) graft copolymer, elongation at break and impact strength were improved for all blends. The effect of these various copolymers is quite different and is in relation with their chemical structure. The recycled blends exhibit suitable properties leading to applications that require good mechanical properties.     

Heat capacities of solid polymers

The heat capacity of a solid polymer is governed by the manner in which the internal energy is distributed over the various degrees of freedom. If the internal energy manifests itself in harmonic oscillatory motions, the heat capacity is the sum of contributions of the normal modes of motion. In practice, full frequency data are not generally available for polymers. This paper proposes an empirical method for determining the heat capacities of linear high polymers by the addition of contributions from different chain segments. A survey of heat capacity data for 30 linear high polymers and several copolymer systems has revealed that additivity is usually valid for a temperature range from about 60°K to the glass-transition temperature. A table of heat capacity contributions of a number of polymer constituents is derived which permits the calculation of unknown heat capacities to an accuracy of ±5% or better. In addition, δC_p data for the increase of the heat capacity at the glass-transition temperature were found to agree with the rule of constant heat capacity increase per mole of “bead” proposed 8 years ago.     

聚环氧乙烷与聚2-乙烯基吡啶混物的导电率及高氯酸锂的增容作用

研究了聚环氧乙烷(PEO)/聚2-乙烯基吡啶(P2VP)的共混物分别经LiCLO₄、四氰基代苯醌二甲烷(TCNQ)及两者共同掺杂后其共混物的离子、电子及混合导电率。当PEO与P2VP的重量比分别为6/4、5/5及4/6时,共混物的混合导电率大于相应的离子及电子导电率的总和,呈现协同效应。从共混物外观的研究发现LiCLO₄能作为PEO/P2VP共混体系的增容剂。     

苯乙烯-马来酸酐共聚物增容Nylon-6/ABS共混体系的形态和力学性能

通过熔融共混法制备了苯乙烯-马来酸酐共聚物(SMA)增容的尼龙6(Nylon-6)/ABS共混物.采用TEM、SEM、FTIR等研究了SMA增容的Nylon-6/ABS共混物的相形态与性能.发现在Nylon-6和ABS的简单共混体系中,分散相易聚集,相界面清晰,断裂面光滑,呈脆性断裂,相容性差.加入少量SMA后,共混物由共连续相结构转变为典型的"海-岛"结构,分散相分布均匀,界面粘接程度增加,表明SMA对Nylon-6/ABS体系有显著的增容效果.     

Effect of compatibilizig agent on the properties of polylactide and polylactide based composite during ozone exposure

Compatibilizers belong to the most important internal factors which influence the degradation process of polymer matrix. For this reason in the current study, polylactide (L), polylactide with 5% of poly(ε-caprolactone) (LK) as compatibilizing agent and samples with 5%wt. of montmorillonite (MMT) (LS5 and LS5K respectively) before and after various time of ozone exposure have been analyzed. The results from infrared spectroscopy, gel permeation chromatography, atomic force microscopy, differential scanning calorimetry and thermogravimetric analysis have been presented. It has been established that microstructural changes during ozone exposure of the samples with the presence of compatibilizer increase in relation to the samples comprising PLA and PLA filled with montmorillonite. Moreover it has been determined that the introduction of poly(ε-caprolactone) into pure polymer as well as into PLA-montmorillonite material accelerates ozone-induced degradation, although it does not change the mechanism of the degradation process.     

嵌段共聚物相容剂对聚合物共混体系力学性能影响的连续介观模拟

结合介观动力学方法和三维弹簧格子模型, 研究了嵌段共聚物相容剂对相容性较差的聚合物二元共混体系力学性能的影响. 在适当范围内不断增加嵌段共聚物相容剂的用量, 研究了相容剂含量对体系杨氏模数及拉伸强度的影响, 同时也对不同体系材料的破碎位点进行了分析. 结果表明, 未加入相容剂的二元共混体系在拉伸模拟中表现出较低的拉伸强度, 而适量添加相容剂可以显著提升材料的拉伸强度, 随着相容剂含量的增加, 共混体系的破碎位点会发生转移并最终改善材料的整体性能. 而相容剂的加入对体系杨氏模数的影响较小. 该连续模拟方法为关联聚合物复合体系的微观结构和宏观力学性能提供了一条高效的途径.     

聚偏氟乙烯/聚醚型热塑性聚氨酯弹性体共混物的相互作用及增容机理

采用流延成膜法制备了4种增容改性的聚偏氟乙烯（PVDF）与聚醚型热塑性聚氨酯弹性体（TPU）固体共混物（PVDF/TPU）.结合分子动力学模拟研究了PVDF/TPU的相互作用,并探讨了其增容机理.研究结果表明,与PVDF/TPU-1,PVDF/TPU-2及PVDF/TPU-3相比,加入γ-缩水甘油醚氧丙基三甲氧基硅烷-端氨基丁腈橡胶（GPTMS-ATBN）后,PVDF/TPU-4的2个玻璃化转变温度（T_g）相互靠近,两相界面存在分布梯度,构成了双相连续的微观结构,表明GPTMS-ATBN增容PVDF/TPU共混物具有显著效果.同时,PVDF/TPU-4的共混结合能大幅减小,二面角扭转能、键角弯转能等明显增大,表明PVDF及TPU与GPTMS-ATBN之间发生相互作用.傅里叶红外光谱（FTIR）及X射线光电子能谱（XPS）证实了GPTMS-ATBN增容PVDF/TPU的机理为GPTMS-ATBN中ATBN链段与PVDF彼此缠绕,相互混溶,而水解后两端GPTMS中大量羟基与TPU分子链中氨基甲酸酯键及醚键相互吸附,从而生成了氢键.     

相容剂对PP/POE共混体系脆韧转变行为的影响

采用熔融挤出法制备了不同相容剂含量的PP/POE共混体系,测试了不同体系的脆韧转变温度、热性能和力学性能.结果表明,乙烯-丙烯多嵌段共聚物相容剂的加入降低了PP/POE共混物的脆韧转变温度,提高了共混物的韧性.AFM和STEM照片显示相容剂的加入减小了橡胶分散相的临界粒子间距,PP和POE在两相界面结合处相互扩散或渗透,实现了POE弹性体在PP树脂中合适的尺度分布以及良好的形态分散.当相容剂含量达到10％时,POE分散相尺寸细小均匀,分散相粒子粒径为0.54μm,粒子间距为0.1 μm,PP结晶链段更多地插入到弹性体内部,弹性体POE分散相形成明显的“硬核-软壳”结构.DSC曲线中结晶峰和熔融峰的变化说明适量的相容剂对于材料结晶度的提高具有一定的促进作用.力学性能测试结果可以看出相容剂的加入在提高材料韧性,降低其脆韧转变温度的同时也保持了材料的刚性性能.