Target-triggered inhibiting oxidase-mimicking activity of platinum nanoparticles for ultrasensitive colorimetric detection of silver ion

The development of efficient methods for the detection of hazardous and toxic elements is extremely important for environmental security and public health. In this work, we developed a facile colorimetric assaying system for Ag⁺ detection in aqueous solution. Chitosan-stabilized platinum nanoparticles (Ch-PtNPs) were synthesized and severed as an artificial oxidase to catalyze the oxidation of the substrate 3,3′,5,5′-tetramethylbenzidine (TMB) and generate color signal. In the presence of Ag⁺, due to the strong metallophilic interactions between Ag⁺ and Pt²⁺ on the surface of Ch-PtNPs, Ag⁺ can weaken the affinity to the substrates and inactivate the catalytic activity of Ch-PtNPs, leading to decreased absorbance signal to varying degrees depending on Ag⁺ amount. Combing the specific binding between Ch-PtNPs and Ag⁺ with signal amplification procedure based on the Ch-PtNPs-catalyzed TMB oxidation, a sensitive, selective, simple, cost-effective, and rapid detection method for Ag⁺ can be realized. Ag⁺ ions in tap and lake waters have been successfully detected. We ensured that the proposed method can be a potential alternative for Ag⁺ determination in environmental samples.     

吗啡烷型生物碱类药物的化学发光分析法研究

雷氏盐（ＮＨ４Ｃｒ（ＮＨ３）２（ＳＣＮ）４）．Ｈ２Ｏ）是生物碱类物质的沉淀剂，经研究发现，雷氏盐可以催化鲁米诺与过氧化氢的化学发光反应，而吗啡烷型生物碱能沉淀雷氏盐，可导致鲁米诺－过氧化氢－雷氏盐体系化学发光强度的降低，根据这一发现，本文建立了吗啡烷型生物碱类药物（吗啡，青藤碱，可待因）的流动注射化学发光分析方法，方法有较低的检出限，较宽的线性范围和较好精密度用于一些药物的测定，结果较为满意。     

Ag@Au core/shell triangular nanoplates with dual enzyme-like properties for the colorimetric sensing of glucose

Due to the serious harm of diabetes to human health, development of sensitive assays for glucose level is of high significance for early prevention and treatment of diabetes. Currently, most conventional enzyme-based glucose sensors suffer from high cost and low stability due to the inherent defects of natural enzymes. Herein, we develop a pure nanozyme-based glucose detection method using Ag@Au core/shell triangular nanoplates (TNPs), which combines glucose oxidase (GOD)- and horseradish peroxidase (HRP)-like activities of the Au shell and inherent plasmonic properties of Ag TNPs. The sensing mechanism is based on the fact that the Au shell possessed GOD-like activity, enabling the oxidation of glucose to produce H₂O₂, which can further etch the silver core, leading to the decrease of absorbance at 800 nm and the color change from blue to colorless. Compared with the previous nanozymes-based glucose sensors, our method avoids the use of enzymes and organic chromogenic agent. Moreover, the stability of the Ag@Au core/shell TNPs is much better than that of Ag TNPs due to the protection by the coating of the Au shell. This method was successfully applied to the detection of urine samples from patients with diabetes, indicating its practical applicability for real sample analysis.     

Determination of orthophosphates using a macro segmented flow analyzer (MSFA) based on colorimetric detection

Fabrication of a macro segmented flow analysis (MSFA) system based on reconfiguration of the manifold by adjustment of the sample/reagent ratio, has been found to produce a sensitive method for orthophosphate analysis based on colorimetric detection at 880 nm. Optimization of sample tube length, reaction temperature and molybdate concentration in the carrier solutions has been carried out. The larger sample tube internal diameter led to the combined advantages of better sensitivities, wider working range and higher sample throughput over most existing methods. Using the optimized conditions of 50.0 cm sample tube length (1.6 mm i.d.), 37.0 °C reaction temperature and 0.0113 M molybdate concentration in the carrier solution, the calibration model for orthophosphate standard solutions was found to be linear (y = 0.04895x + 0.003561; correlation coefficient, r²=0.9970) over the working range 0.01-2.00 mg l⁻¹ orthophosphate. The volume of the sample injected was 1.396 ml at a flow rate of 6.0 ml min⁻¹. The sample throughput of this MSFA method was 40 samples per an hour, with a detection limit of 4.0 μg l⁻¹, and %R.S.D.’s below 5%. The MSFA method was successfully applied to analysis of water and wastewater samples.     

Dual chemosensing properties of new anthraquinone-based receptors toward fluoride ions

Novel colorimetric receptors 1-[(2-hydroxy-5-bromo-benzylidene)-amino]-anthraquinone, 1-[(2-hydroxy-5-methyl-benzylidene)-amino]-anthraquinone, and 1-[(2-hydroxy-5-nitro-benzylidene)-amino]-anthraquinone have been synthesized as fluoride ion sensors. A color change was observed visually (naked-eye) upon addition of fluoride ions in organic solvents to solutions of the receptors.     

Cathodic electrochemiluminescence at double barrier Al/Al2O3/Al/Al2O3 tunnel emission electrodes

Double insulating barrier tunnel emission electrodes were fabricated by adding a new pure aluminum layer upon oxidized aluminum electrodes by vacuum evaporation and thermally oxidizing the new aluminum layer in air at room temperature. Resulting Al/Al₂O₃/Al/Al₂O₃ electrodes allow the use of various aluminum alloys in the electrode body necessary for hardness or shaping ability of the electrode while obtaining the luminescence properties of pure aluminum oxide. During electrical excitation of luminescent labels by cathodic hot electron injection into aqueous electrolyte solution, the background noise is mainly based on high-field-induced solid-state electroluminescence and F-center luminescence of the outer aluminum oxide film. The more defect states and/or impurity centers the outer oxide film contains, the higher is the background emission intensity. The present electrode fabrication method provides a considerable improvement in signal-to-noise ratio for time-resolved electrochemiluminescence (TR-ECL) measurements when the original native oxide film of the electrode body contains luminescence centers displaying long-lived luminescence. The excellent performance of the present electrodes is demonstrated by extremely low-level detection of Tb(III) chelates, luminol, Pt(II) coproporphyrin and Tb(III) labels in an immunometric immunoassay by time-resolved electrochemiluminescence.     

Redox-iodometry: a new potentiometric method

A new iodometric method for quantifying aqueous solutions of iodide-oxidizing and iodine-reducing substances, as well as plain iodine/iodide solutions, is presented. It is based on the redox potential of said solutions after reaction with iodide (or iodine) of known initial concentration. Calibration of the system and calculations of unknown concentrations was performed on the basis of developed algorithms and simple GWBASIC-programs. The method is distinguished by a short analysis time (2–3 min) and a simple instrumentation consisting of pH/mV meter, platinum and reference electrodes. In general the feasible concentration range encompasses 0.1 to 10^–6 mol/L, although it goes down to 10^–8 mol/L (0.001 mg Cl₂/L) for oxidants like active chlorine compounds. The calculated imprecision and inaccuracy of the method were found to be 0.4–0.9% and 0.3–0.8%, respectively, resulting in a total error of 0.5–1.2%. Based on the experiments, average imprecisions of 1.0–1.5% at c(Ox)>10^–5 M, 1.5–3% at 10^–5 to 10^–7 M, and 4–7% at <10^–7 M were found. Redox-iodometry is a simple, precise, and time-saving substitute for the more laborious and expensive iodometric titration method, which, like other well-established colorimetric procedures, is clearly outbalanced at low concentrations; this underlines the practical importance of redox-iodometry.

---

An erratum to this article is available at .     

Metal complex with terpyrindine derivative ligand as highly selective colorimetric sensor for iron(Ⅲ)

A new metal complex[MnL₂]（NO₃）₂·CH₃CN（1） was synthesized by reaction of 4’-4-（l,2,4-triazol-l-yl）phenyl -2,2’:6’,2"-terpyridine（L） with manganese nitrate.The structure of the complex was determined by X-ray crystallography.The results of UV-vis studies showed that the complex exhibits colorimetric sensing ability for Fe³⁺,which can be observed by naked eye.     

Specific ionic effect for simple and rapid colorimetric sensing assays of amino acids using gold nanoparticles modified with task-specific ionic liquid

In this study, a novel task-specific ionic liquid functionalized gold nanoparticle (TSIL-GNP) was successfully prepared and applied in the recognition of amino acids. Particularly, the surface of GNP was modified with the ionic liquid containing carbamido and ester group via thiol, which was characterized by Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). The stability of this material in aqueous solution improves apparently and can remain unchanged for more than three months. The effect of pH was also discussed in this study. Attractive ionic interaction would effectively weaken intensity of the covalent coupling between the metal ion and the functional groups of amino acids. Thus, TSIL-GNP was successfully applied to recognizing serine, aspartic acid, lysine, arginine, and histidine in the presence of Cu²⁺ through distinctive color changes. Suspension would be generated once a spot of cysteine was added into the GNPs solution. Results indicated that it had a good linear relationship between extinction coefficients and concentration of amino acids in a wide range of 10⁻³–10⁻⁶ M. Moreover, the proposed strategy was successfully used to analyze the histidine in urinary samples. In brief, TSIL-GNP is a suitable substrate for discrimination of five amino acids in a rapid and simple way without sophisticated instruments.     

Colorimetric Chemosensor for Chloramphenicol Based on Colloidal Magnetically Assembled Molecularly Imprinted Photonic Crystals

A novel colorimetric chemosensor with good sensitivity, specificity, and self‐reporting capability for chloramphenicol (CAP ) has been successfully constructed based on colloidal, magnetically assembled photonic crystals coupled with molecular imprinting. The colloidal, magnetically assembled, molecularly imprinted photonic crystals (CMA ‐MIPCs ) were prepared by assembling CAP in magnetic, molecularly imprinted nanohydrogels (MMIHs ) in a magnetic field. The magnetic assembly of photonic crystals and the sensing processes could be completed simultaneously when MMIHs were dispersed in CAP solutions and in a magnetic field, and the response time was less than 1 min. The CAP concentration could be visually determined from the color change of the CMA ‐MIPCs sensor. The diffraction color blue‐shifted from luminous yellow of the blank to purple in a 1.0 mg/mL CAP solution, with a determination limit of 1.0 × 10⁻³ mg/mL. It could provide a new strategy for qualitative or semiquantitative detection of CAP .