4-Benzoylbenzoate intercalated in layered double hydroxides: a new catalyst for photo-oxidation of sulfides in solution and in the gas phase

A new mixed organic-inorganic photosensitizer, based on 4-benzoylbenzoate intercalated into a layered double hydroxide has been prepared, characterized and successfully tested for the photo-oxidation of dialkylsulfides, both in acetonitrile and in the gas phase.     

罗丹明B-过氧乙酸-氢氧化钠化学发光法测定痕量硫

基于硫离子对罗丹明B 过氧乙酸 NaOH化学发光有较强的增敏作用,建立了流动注射化学发光增强法测定痕量硫的新方法。该法的线性范围为3.0×10-8～8.0×10-7g/mL,检出限为3.5ng/mL,相对标准偏差为2.2%(1.0×10-7g/mLS2-,n=11)。此法已用于环境水样中痕量硫的测定。     

Simultaneous kinetic determination of thiocyanate and sulfide using eigenvalue ranking and correlation ranking in principal component-wavelet neural network

In this work, two toxic compound, sulfide and thiocyanate were determined simultaneously using kinetic spectrophotometry. These anions have shown the catalytic effects on the reaction between iodine and azide. Since the system was nonlinear, a nonlinear model, principal component-wavelet neural network (PC-WNN) was used as the multivariate calibration method. The principal component analysis was used to decrease the dimension of the original matrix. In other words, the scores of the PCs, 5, instead of the original variables, 301, were used as the input for the model. Two methods were used to select the most relevant principal components: eigenvalue ranking and correlation ranking. In this work, eigenvalue and correlation ranking methods have shown better results for thiocyanate and sulfide, respectively, and it can be concluded that these methods are complementary. The WNN has several advantages relative to other types of neural network such as better convergence ability. The data set was divided to calibration, prediction and validation sets. Each set was selected so that the concentrations of the analytes were approximately covered the entire ranges of the analytes. Mean relative error for thiocyanate and sulfide in validation set were 8.5 and 10.6, respectively. Thiocyanate and sulfide can be determined in the range of 60–700 ng ml⁻¹ and 20–400 ng ml⁻¹, respectively. The proposed method was applied for the determination of sulfide and thiocyanate in real samples such as tap, waste and river waters with satisfactory results.     

Electrochemical Processes of Sulfide in NaCl Electrolyte Solutions on Mercury Electrode

The electrochemical processes of sulfide in NaCl electrolyte solutions were studied using stripping cyclic voltammetry, differential capacity and chronoamperometric measurements. Some new effects were observed and are here discussed. At potentials around ?0.1 to ?0.3 V a pair of Faradaic adsorptive peaks, which can only be observed in the presence of chloride, is attributed to the formation of HgCl ion from the deposited layer of HgS. A second pair of peaks of purely capacitive character was observed at ?0.4 V. This is the result of the reorientation and partial desorption or transformation of HgS layers. The formation and dissolution of HgS layers on mercury has been well investigated previously. We observed some new effects after depositing approximately ten layers of HgS and attributed this to the formation of polysulfides at positive potentials.     

Copper catalyzed oxidation of sulfides to sulfoxides with aqueous hydrogen peroxide

Copper(II) complex 1 catalyzes the oxidation of sulfides to sulfoxides with 30% H₂O₂ in high yields. Addition of a catalytic amount of TEMPO to the reaction mixture enhances the conversion and selectivity. Complex 1 can be recycled without loss of activity.     

Syntheses and structures of six compounds in the A2LiMS4 (A=K, Rb, Cs; M=V, Nb, Ta) family

Six new compounds in the A₂LiMS₄ (A=K, Rb, Cs; M=V, Nb, Ta) family, namely K₂LiVS₄, Rb₂LiVS₄, Cs₂LiVS₄, Rb₂LiNbS₄, Cs₂LiNbS₄, and Rb₂LiTaS₄, have been synthesized by the reactions of the elements in Li₂S/S/A₂S₃ (A=K, Rb, Cs) fluxes at 773 K. The A and M atoms play a role in the coordination environment of the Li atoms, leading to different crystal structures. Coordination numbers of Li atoms are five in K₂LiVS₄, four in A₂LiVS₄ (A=Rb, Cs) and Cs₂LiNbS₄, and both four and five in Rb₂LiMS₄ (M=Nb, Ta). The A₂LiVS₄ (A=Rb, Cs) structure comprises one-dimensional chains of tetrahedra. The Rb₂LiMS₄ (M=Nb, Ta) structure is composed of two-dimensional layers. The Cs₂LiNbS₄ structure contains one-dimensional chains that are related to the Rb₂LiMS₄ layers. The K₂LiVS₄ structure contains a different kind of layer.     

A highly efficient synthesis of antiobestic ligand GW501516 for the peroxisome proliferator-activated receptor δ through in situ protection of the phenol group by reaction with a Grignard reagent

A new synthesis of an agonist for the peroxisome proliferator-activated receptor δ (PPARδ) GW501516 as a potential antiobesity drug is described. The synthetic route involves the in situ protection of the phenol group with a Grignard reagent and a regio-controlled one-pot reaction for the formation of a sulfide bond as the key step. Starting from commercially available 4-iodo-2-methylphenol, this approach affords GW501516 with an overall yield of 87%.     

The Electrochemically Initiated Reaction of Sulfide with N,N‐Diethyl‐p‐phenylenediamine in Dimethylformamide. Part II: Implications for Sensing Strategies

The electrochemically initiated reaction of p‐phenylenediamines with sulfide in aqueous media is well documented. We now report the adaptation of this chemistry into nonaqueous media. This is critically appraised as a means of detecting sulfide. The electrochemically initiated reaction of N,N‐diethyl‐p‐phenylenediamine with sulfide is shown at both macro‐ and platinum microdisk electrodes with quantitative detection of sulfide produced by means of the enhanced currents observed upon its addition. The linear detection range for sulfide is dependent on the concentration of N,N‐diethyl‐p‐phenylenediamine present with a linear range from 28–3290 μM and a limit of detection of 22 μM achievable. This represents a large increase compared to that found previously in aqueous media and offers the prospect of more ready applications in high temperature systems.     

Moderating the nucleophilicity of the sulfide ligands in the dinuclear {Pt2S2} metalloligand system using triphenylarsine

Reaction of cis-[PtCl₂(AsPh₃)₂] with excess sodium sulfide in benzene gave the triphenylarsine analogue of the well-known metalloligand [Pt₂(μ-S)₂(PPh₃)₄] as an orange solid.The compound was characterised by detailed mass spectrometry studies, and by conversion to various alkylated and metallated derivatives.The sulfide ligands in [Pt₂(μ-S)₂(AsPh₃)₄] are less basic than the triphenylphosphine analogue, and the complex gives a relatively weak [M+H]⁺ ion in the positive-ion electrospray (ESI) mass spectrum, compared with the phosphine analogue.Methylation of an equimolar mixture of [Pt₂(μ-S)₂(PPh₃)₄] and [Pt₂(μ-S)₂(AsPh₃)₄] with MeI gave the species [Pt₂(μ-S)(μ-SMe)(AsPh₃)₄]⁺ and [Pt₂(μ-SMe)₂(PPh₃)₃I]⁺, indicating a reduced tendency for the sulfide of [Pt₂(μ-S)(μ-SMe)(AsPh₃)₄]⁺ to undergo alkylation.The lability of the arsine ligands is confirmed by the reaction of an equimolar mixture of [Pt₂(μ-S)₂(PPh₃)₄] and [Pt₂(μ-S)₂(AsPh₃)₄] with n-butyl chloride, giving [Pt₂(μ-S)(μ-SBu)(EPh₃)₄]⁺ (E = P, As), which with Me₂SO₄ gave a mixture of [Pt₂(μ-SMe)(μ-SBu)(PPh₃)₄]²⁺ and [Pt₂(μ-SMe)(μ-SBu)(AsPh₃)₃Cl]⁺.Reactivity towards 1,2-dichloroethane follows a similar pattern.The formation and ESI MS detection of mixed phosphine-arsine {Pt₂S₂} species of the type[Pt₂(μ-S)₂(AsPh₃)_n(PPh₃)_4−n] is also discussed. Coordination chemistry of [Pt₂(μ-S)₂(AsPh₃)₄] towards a range of metal-chloride substrates, forming sulfide-bridged trinuclear aggregates, has also been probed using ESI MS, and found to be similar to the phosphine analogue. The X-ray crystal structure of [Pt₂(μ-S)₂(AsPh₃)₄Pt(cod)](PF₆)₂ (cod = 1,5-cyclo-octadiene) has been determined for comparison with the (previously reported) triphenylphosphine analogue. ESI MS is a powerful tool in exploring the chemistry of this system; in some cases the derivatising agent p-bromobenzyl bromide is used to convert sparingly soluble and/or poorly ionising {Pt₂S₂} species into soluble, charged derivatives for MS analysis.     

Mn(III)-catalyzed oxidation of sulfides to sulfoxides with hydrogen peroxide

Sulfides were selectively oxidized to the corresponding sulfoxides in good yields with hydrogen peroxide using a manganese(III) Schiff-base complex as a catalyst in glacial acetic acid as solvent under mild conditions.