沉淀法制备CeO2超微粉末

采用过氧化氢－－氨水沉淀法在较低温度下制备ＣｅＯ２超微粉末。试验表明，溶液起始浓度及焙烧温度以形成粉素晶体粒径有一定影响。焙烧温度在２２０－８５０℃，所得ＣｅＯ２微粉均为立方晶系，透射电测试表明，粒子基本呈球形，晶体平均粒径随焙烧温度升高而增大。控制适当条件，可制得粒径范围在５－１３ｎｍ，比表面积１１１．８ｍ＾２／ｇ的ＣｅＯ２超微粉末。     

Eu3+掺杂的Sr2CeO4荧光材料的燃烧法合成及其性能研究

以尿素作燃料,Sr,Ce和Eu的硝酸盐作反应物,采用燃烧法得到了稀土Eu3 掺杂的Sr2CeO4前驱体粉末.将前驱体在一定温度下烧结3 h,合成了红色荧光材料.经过对材料进行X射线衍射(XRD)分析,确定了烧结温度在1050～1200℃时,能够得到纯度较高的产品.用扫描电镜(SEM)观察到样品烧结后的形貌为不规则的椭圆形,粒径范围在1～3 μm之间.样品的发射光谱和激发光谱表明,Eu3 在Sr2CeO4基质中有很高的猝灭浓度(10%,摩尔分数),随着Eu3 掺杂浓度的增加,可以使蓝白光调整到红白光,进而到红光.     

纳米CeO2的形貌控制与表征

以Ce(NO3)3·6H2O和(NH4)2CO3为沉淀源,利用柠檬酸作为络合剂和分散剂,实现了对CeO2前驱体的形貌和尺寸控制,并采用TEM,TGA和XRD等方法对前驱体及其热分解所得纳米CeO2的形貌及结晶性等进行了表征.结果表明,随着柠檬酸加入量的提高,前驱体形貌从纳米线向类球形颗粒变化,焙烧生成的纳米CeO2颗粒的形貌具有明显继承性,所得CeO2属于立方萤石结构,且随焙烧温度的提高,晶化程度增大.     

CuO／CeO2和CuO／Al2O3催化剂的催化性能

本文以ＣＯ氧化为模式反应考察了ＣｅＯ２和Ａｌ２Ｏ３负载氧化铜催化剂的氧化活性，运用ＸＲＤ和ＴＰＲ技术研究了催化剂的还原性能和物相结构，结果表明：载体性质对负载ＣｕＯ催化剂的ＣＯ氧化活性有很大影响，ＣｕＯ／ＣｅＯ２催化剂活性明显高于ＣｕＯ／Ａｌ２Ｏ３催化剂．催化剂的还原特性随载体不同而不同．同时发现，热处理对催化剂铜物种的存在形式，晶粒大小、还原特性及其催化活性有明显影响，ＣｕＯ／Ａｌ２Ｏ３催化剂活性下降的主要因素是生成了活性较低的ＣｕＡｌ２Ｏ４相，而ＣｕＯ／ＣｅＯ２催化剂活性下降是由于ＣｕＯ和ＣｅＯ２发生烧结，晶粒变大     

纳米CeO2基固溶体催化柴油机碳颗粒物燃烧性能

采用柠檬酸溶胶鄄凝胶法制备CeO2基固溶体催化剂(Ce0.7Zr0.3O2-δ、Ce0.7Pr0.3O2-δ和Ce0.7Gd0.3O2-δ), 并考察了固溶体和三种常用载体(TiO2、SiO2和Al2O3)及其负载KNO3后的催化碳黑燃烧活性. 结果表明, CeO2基固溶体催化剂具有很高的催化燃烧活性, 其活性接近TiO2、SiO2和Al2O3负载30%KNO3催化剂的活性. 因为纳米CeO2基固溶体的形成, 提高了催化剂的抗烧结能力, 使氧更活泼, 从而提高氧化还原性能, 有利于碳颗粒燃烧. 由于CeO2基固溶体本身的高活性, 因此KNO3的添加不能明显提高CeO2基固溶体催化剂(尤其是Ce0.7Zr0.3O2-δ和Ce0.7Pr0.3O2-δ)的催化燃烧活性, 但KNO3能显著提高TiO2, SiO2和Al2O3的催化燃烧活性.     

Effect of Addition of Base on Ceria and Reactivity of CuO/CeO2 Catalysts for Low-Temperature CO Oxidation

In this work, we have reported the influence of the addition of base (KOH) on the physicochemical property of ceria synthesized by alcohothermal process, and the alcohothermal mechanism was also put forward. Furthermore, the prepared CeO2 was used as the support to prepare CuO/CeO2 catalysts via the wet impregnation method. The samples were characterized by N2 adsorption-desorption, X-ray powder diffraction (XRD), high resolution transmission electron microscopy (HRTEM), and temperature-programmed reduction by H2 (H2-TPR). The catalytic properties of the CuO/CeO2 catalysts for low-temperature CO oxidation were studied using a microreactor-GC system. The crystal size of CeO2-A was much smaller than that of CeO2-B, and the corresponding copper oxide catalysts exhibited higher catalytic activity than that of the CeO2-B-supported catalysts under the same reaction conditions. The alcohothermal mechanism indicated that KOH plays a key role in determining the physicochemical and catalytic properties of ceria-based materials.     

以环糊精为模板剂制备不同粒径CeO2纳米粒子

稀土化合物由于具有许多特殊的性质而引起了世界各国科学家的高度重视.CeO2是一种廉价而用途很广的材料,如用于发光材料、催化剂、电子陶瓷、玻璃的抛光等.尤其,CeO2因具有特殊的储氧和释氧能力而作为重要的助催化剂在汽车尾气催化净化中得到广泛应用[1,2].大量文献研究表明,制     

锰—铈复合氧化物催化剂表面氧的性质

氧化锰催化剂广泛用于一氧化碳常温氧化及汽车尾气的净化等,CeO_2是氧化物催化剂的优良助剂。非贵金属催化剂中添加CeO_2能提高催化剂的氧化活性已有很多报道,但有关Ce对氧化锰结构及表面氧脱附性能影响的研究尚不多见。本文运用XRD、DTA和TPD-MS等手段对共沉淀法制得的Mn-Ce复合氧化物进行了物相结构和脱氧活性研究。     

钴铈复合金属氧化物催化剂上氧化亚氮催化分解性能研究

采用共沉淀法制备了一系列钴铈复合金属氧化物催化剂CoCex(x=0～0.2,x为Ce/Co摩尔比),进行了比表面积和XRD表征,并考察了它们对氧化亚氮催化分解反应的活性.结果表明,随着铈添加量的增加,催化剂上钴尖晶石相的衍射峰逐渐宽化,同时催化剂的比表面积逐渐增大;催化剂的活性随着铈添加量的增加先升高,然后下降,CoCe0.05催化剂表现出了最佳催化活性.在对CoCe0.05催化剂制备条件的考察实验中发现,共沉淀过程中控制pH值在9左右,于400 ℃焙烧得到的催化剂的活性最好.当反应气氛中存在O2或H2O时,CoCe0.05催化剂上N2O的分解反应受到抑制,但这种影响是可逆的,可能是由于它们与N2O在相同的活性位上存在竞争吸附.     

Catalytic wet air oxidation of oleic acid on ceria-supported platinum catalyst.effect of pH

Summary Catalytic wet air oxidation (CWAO) of oleic acid was carried out in a batch reactor on platinum supported ceria catalyst (Pt/CeO₂). Oleic acid is a water insoluble linear unsaturated fatty acid of 18 carbon atoms. To increase the homogeneity of the solution by saponification, the influence of NaOH additions in oleic acid CWAO mechanism and catalyst performances have been investigated. The oxidation of such molecule occurs by two types of mechanisms: successive carboxy-decarboxylation which leads essentially to CO₂and/or C-C bonds splitting in the alkyl chain inducing a high formation of acetic acid. With or without NaOH, the 5%Pt/CeO₂catalyst is active in the conversion of oleic acid and selective to carbon dioxide. In alkaline medium, oleic acid is initially saponified which increases the solubility of the reactant before it to be oxidized. Finally the oxidation is slightly delayed by the presence of NaOH. The catalyst characterizations show no significant difference before and after reaction.</o:p>