Comparative investigation of up-conversion luminescence in Tm/Yb-codoped germanate-niobic and germanium-bismuth glasses: effect of phonon density on up-conversion emission

Tm³⁺/Yb³⁺-codoped germanate-niobic (GN) and germanium-bismuth (GB) glasses have been synthesized by conventional melting and quenching method. Intense blue and weak red emissions centered at 477 and 650 nm, corresponding to the transitions ¹G₄→³H₆ and ¹G₄→³H₄, respectively, were observed at room temperature. The possible up-conversion mechanisms are discussed and estimated. GN glass showed a weaker up-conversion emission than GB glass, which is inconsistent with the prediction from the difference of maximum phonon energy between GN and GB glasses. In this paper, Raman spectroscopy was employed to investigate the origin of the difference in up-conversion luminescence in the two glasses. Compared with phonon side-band spectroscopy, Raman spectroscopy extracts more information including both phonon energy and phonon density. For the first time, our results reveal that, besides the maximum phonon energy, the phonon density of host glasses is also an important factor in determining the up-conversion efficiency.     

Ce偶-偶同位素低激发态性质的IBM2描述

通过考虑同类核子相干对间的四极相互作用，在IBM2中对Ce偶－偶同位素^128Ce-^138Ce的低激发态能谱和E2跃迁几率及分支比进行了理论分析，计算结果有效地改善了IBM中这些核的γ带能谱的Staggering现象描述，与实验观察到的低激发态结果基本一致。     

Energy storage in Ce-doped LiCaAlF6 and LiSrAlF6 crystals

Absorption, emission and thermoluminescence (TL) of as-grown and X-irradiated pure and Ce-doped LiCaAlF₆ (LiCAF) and LiSrAlF₆ (LiSAF) crystals have been analyzed. It is shown that the energy storage is defined by the dissimilarity of basic matrix properties, intrinsic defect structure, preferred Ce³⁺ ion disposition and charge compensation defect type. This is the reason of higher colorability and TL efficiency of as-grown Ce:LiSAF compared to Ce:LiCAF. Pre-filling of ultra-deep traps leads to enormous increases in the TL response. Due to these properties Ce:LiSAF and Ce:LiCAF are promising thermoluminescent dosimetric materials.     

SCDA for 3D lattice gases with repulsive interaction

The selfconsistent diagram approximation (SCDA) is generalized for three-dimensional lattice gases with nearest neighbor repulsive interactions. The free energy is represented in a closed form through elementary functions. Thermodynamical (phase diagrams, chemical potential and mean square fluctuations), structural (order parameter, distribution functions) as well as diffusional characteristics are investigated. The calculation results are compared with the Monte Carlo simulation data to demonstrate high precision of the SCDA in reproducing the equilibrium lattice gas characteristics. It is shown that similarly to two-dimensional systems the specific statistical memory effects strongly influence the lattice gas diffusion in the ordered states. Received 7 August 2002 / Received in final form 22 January 2003 Published online 24 April 2003     

铈杂多配离子-水滑石超分子层柱材料ZnAl-Ce(PMoV)2的插层组装、表征及催化性能

以十四酸根阴离子柱撑Zn-Al水滑石Zn0.77Al0.22(OH)2.0.22C13H27COO.0.81 H2O(记为ZnAl-14A)为预撑前体,在水溶液中用离子交换法将以2∶17缺位杂多酸根离子(P2Mo16VO61)11-记为(P Mo V)为配体的稀土杂多配阴离子Ce(P2Mo16VO61)219-(记为Ce(PMoV)2)插层组装到水滑石层板间,合成了一种具有大的层间距(3.37 nm)的超分子插层材料Zn0.77Al0.23(OH)2.0.0105[Ce(P1.9Mo15.7V1.1O61)2].0.011C13H27COO.0.83H2O(记为ZnAl-Ce(PMoV)2)。用ICP,IR,XRD和DTA对产物的组成和结构进行了表征。结果表明,该产物中Ce(PMoV)2配阴离子沿其长轴垂直于层板的方向分布于水滑石层间;产物具有规整的层状结构和热稳定性;产物对乙酸与正丁醇的酯化反应,二甘醇的脱水-环化反应和H2O2氧化环己烷的反应有良好的催化性能,且易于回收重复使用。     

La2CaB10O19∶Ce3+在VUV-Vis范围的发光性质研究

通过研究La2CaB10O19∶Ce3+在VUV-Vis范围的光谱, 发现Ce3+在La2CaB10O19中共有两种格位, 分别取代了十配位的La3+和八配位的Ca2+, 从而发射光谱中没有出现特征的双峰, 而出现了峰值约位于307, 330和356 nm的3个发射峰.由于在低对称性晶体场中d轨道的分裂, 激发光谱中位于194, 224, 243, 260, 274和318 nm的峰是由两个格位的Ce3+的f-d跃迁引起的.Ce3+占据两个格位, 可以通过以Eu3+为荧光探针的发射光谱中出现的两个5D0-7F0跃迁得到验证.峰值位于162 nm的激发谱带是基质吸收带, 与基质禁带宽度相对应.通过计算, 不排除其中包含O2-→Ce3+的电荷迁移带的可能性.     

CexTi1-xO2复合氧化物的结构及负载CuO对NO还原性能研究

采用共沉淀法制备了不同摩尔比(x=0,0.1,0.2～0.9,1.0)的CexTi1-xO2复合氧化物,考察了CuO/CexTi1-xO2对NO+CO反应的活性,并用BET,TPR和XRD等技术对各试样进行了表征。结果表明,试样的结构和还原特性随焙烧温度变化而变化。XRD检测表明,x值从0.1增加到0.5时,650℃焙烧的试样已形成了CeTi2O6物相,且主要以无定形状态存在;试样经800℃焙烧后晶化完全;x>0.6时,一些TiO2已经进入了CeO2晶格,形成了Ce Ti固溶体。催化剂活性评价表明CuO/CexTi1-xO2(650℃)对NO+CO反应具有较好的活性,其活性随x值变化而变化。TPR及XRD结果表明CuO与CeTi2O6之间存在很强的相互作用,CeTi2O6物相的形成使CuO的还原峰温由380℃提前到200℃,而CuO的存在又促进CeTi2O6的还原峰温从600℃提前至200～300℃。     

铈改性NaZSM-5分子筛担载Pd催化剂上CO氧化性能研究

以浸渍法制备了一系列添加CeO2的Pd-Ce/NaZSM-5负载型催化剂．以C0氧化为 模型反应，考察了反应温度、Ce含量、预还原、空速及水蒸气等对C0氧化性能的影 响，并利用XIlD和朋等手段对催化剂体相及表面结构进行了表征．结果表明：加入 CeO2作助剂可明显提高催化剂的活性，且催化转化率随着反应温度及Ce含量的增加 而增加；随着空速的增加而降低；催化剂对水蒸气不敏感，在水蒸气存在的条件下 反应可连续进行720h以上保持C0完全转化；H2预还原作用使催化剂活性有所提高． XRD测试结果表明，催化剂中Pd组分处于高分散状态，Ceob的引入促进了N物种在 NaZSM—5载体上的分散．表面XPS分析证实催化剂表面Pd物种处于较高的氧化状态 ，且CeO2与Pd物种间存在协同作用．Pd的高分散及其与CeO2的相互作用是催化剂具 有高活性的关键．     

搅拌釜中制备草酸铈的团聚尺寸模型研究

以硝酸铈和草酸铵反应生成草酸铈沉淀为研究对象，探讨了搅拌釜中输入功率、溶液过饱和度与产物团聚尺寸之间的变化关系并在团聚和破碎动力学的基础上建立了团聚尺寸模型。根据草酸铈沉淀实验中得到的实验结果求得了一定反应体系浓度下的模型K1，K2和K3值，最后通过－↑LtE,max的模型计算值与实验值，ε--↑LtE的模型曲线与实验曲线的比较初步证明了该模型的实际适用性。     

K-Ce_(0.5)Zr_(0.5)O_2催化碳颗粒物燃烧性能

用等体积浸渍法制备了不同K负载量的xKNO3-Ce0.5Zr0.5O2系列催化剂,用程序升温氧化反应(TPO)考察催化剂对碳颗粒物(soot)燃烧的催化活性.并采用XRD、BET、FT-IR、XPS等技术对KNO3负载催化剂进行表征.结果表明KNO3负载量对催化剂的比表面、表面化学环境有显著的影响;KNO3能使催化剂对soot的催化燃烧活性有较大提高,且存在最佳负载量,当x=0.5时,催化剂的活性最好,碳颗粒物的起燃温度(T)i和峰顶温度(Tp)分别为290℃和360℃.在反应过程中,KNO3熔融状态的形成和K2CO3的生成,使催化活性明显提高.