Glass capillary columns for separation of free organic acids

Glass capillary columns have been prepared without acidic additive in the stationary phase, from which free organic acids elute as sharp and symmetrical peaks. The required surface in the borosilicate glass capillary was generated by a combination of leaching with aqueous HCl and deposition of colloidal silica particles; it can be coated with stationary phases have a broad range of polarity. Aqueous samples containing free organic acids can also be analyzed in such columns in an isothermal mode.     

Simultaneous determination of C1−C8 n-alkyl acetates and corresponding mono-, di- and trichloroacetates on glass capillary columns with programmed temperature rise

Summary Gas chromatography of mixtures of aliphaticn-alkyl acetates (CH₃–COOR), chloroacetates (CHCl₂–COOR), dichloroacetates (CHCl₂–COOR) and trichloroacetates (CCl₃–COOR), where the alcohol chain length (R) varied between 1 and 8, has been studied on SE-30, Carbowax 20M and OV-351 glass capillary columns with programmed temperatures from 50°C at 2, 4, 6, 8 and 10°C/min. Compounds in the homologous series are eluted in the direct order from methyl ton-octyl acetate. The isomeric chloro esters are eluted on SE-30 according to their boiling points in the order: mono-, di- and trichloro isomer, whereas on polar columns di- and trichloro esters are eluted in the reverse order. The complete separation of all 32 individual components from the mixture could not be reached by any single column, the best separation occurred on SE-30. The mixture can, however, be separated by using columns with polar and non-polar stationary phases. The relative retention times for the compounds are given and the retention order discussed.     

新型溶胶-凝胶气相色谱柱:聚甲基苯基硅氧烷柱、Carbowax柱及PEG-Silane柱

采用聚甲基苯基硅氧烷、Carbowax 20M、PEG-silane为固定相制取了溶胶-凝胶气相色谱毛细管柱在这些色谱柱上脂肪酸、酚类、胺和苯胺类、醇、醛等各类化合物都得到很好的分离一采用这些固定相的溶胶一凝胶柱对化合物的分离也表现出很好的重现性。溶胶-凝胶法制柱对各类固定相是普遍适用的方法．     

Modified HS-SPME for determination of quantitative relations between low-molecular oxygen compounds in various matrices

Similar quantitative relations between individual constituents of the liquid sample established by its direct injection can be obtained applying Polydimethylsiloxane (PDMS) fiber in the headspace solid phase microextraction (HS-SPME) system containing the examined sample suspended in methyl silica oil. This paper proves that the analogous system composed of sample suspension/emulsion in polyethylene glycol (PEG) and Carbowax fiber allows to get similar quantitative relations between components of the mixture as those established by its direct analysis, but only for polar constituents. It is demonstrated for essential oil (EO) components of savory, sage, mint and thyme, and of artificial liquid mixture of polar constituents. The observed differences in quantitative relations between polar constituents estimated by both applied procedures are insignificant (F_exp < F_crit). The presented results indicates that wider applicability of the system composed of a sample suspended in the oil of the same physicochemical character as that of used SPME fiber coating strongly depends on the character of interactions between analytes-suspending liquid and analytes-fiber coating.     

Gas chromatographic retention indices for C6 alkanols on OV-101 and Carbowax 20M capillary columns

Summary Gas chromatographic retention indices for 16 C₆ alkanols measured on capillary columns coated with OV-101 methylsilicone and Carbowax 20M propylethyleneglycol liquid phases at 80° and 90°C were determined. The respective standard deviation values were 0.5 and 0.8 i.u. The correlation between the retention indices measured on non-polar and polar stationary phases and the boiling points of the alkanols was studied.     

Modified headspace solid‐phase microextraction for the determination of quantitative relationships between components of mixtures consisting of alcohols,esters, and ethers — impact of the vapor pressure difference of the compounds

The quantitative relationship between analytes established by the headspace solid‐phase microextraction procedure for multicomponent mixtures depends not only on the character and strength of interactions of individual components with solid‐phase microextraction fiber but also on their vapor pressure in the applied headspace solid‐phase microextraction system. This study proves that vapor pressure is of minor importance when the sample is dissolved/suspended in a low‐volatility liquid of the same physicochemical character as that of the used solid phase microextraction fiber coating. It is demonstrated for mixtures of alcohols, esters, ethers and their selected representatives by applying a headspace solid‐phase microextraction system composed of Carbowax fiber and sample solutions in polyethyleneglycol. The observed differences in quantitative relations between components of the examined mixtures established by their direct analysis and by modified headspace solid‐phase microextraction are insignificant (F _exp < F _crit). It is explained by a significant diminution in vapor pressure difference between individual components of the examined mixture in the applied headspace solid phase microextraction system due to low components concentration in polyethyleneglycol suspensions (Raoult's law) and due to strong specific interactions of analyte molecules with polyethyleneglycol molecules.     

Influence of different deactivation methods on the sorption properties of diatomaceous supports for GLC

Summary Different types of diatomaceous supports, (pink and white) were deactivated in different ways: HCl gas treatment at high temperature, silanization and polymer coating with Carbowax 20 M. The adsorption effects of those supports when not coated with stationary phase were tested with samples of different polarity. The Carbowax modification of supports gives a surface of very low activity, irrespective of whether the pink or the cleaner white diatomite type was the initial material. The polymer coating behaves like a thin-layer of stationary phase, of considerably less polarity than the original Carbowax, and gives rise to a partition-like retention. The silanized supports are of moderate activity, the white type being less active than the pink one. This is explained by the higher content of aprotonic active sites in the latter, which cannot be blocked by silanization.     

Flexible soft glass capillary columns vs. flexible fused silica capillary columns for gas chromatography-a critique

The gas chromatographic use of flexible thin walled soft glass capillary columns coated with non-polar stationary phases is compared to similar columns made of fused silica glass. With non-polar soft glass columns, the use of surface roughening viagaseous HCI followed by a Carbowax 20 M pretreatment gave adsorptive phenomena, and thermal instability. With very polar soft glass columns where a variety of cyanopropyl silicone phases were coated directly onto the NaCI crystal matrix, adsorptive effects were again prominent and frequent break-down in film stability with time, was also observed. These undesirable effects were due to the presence of metal oxides in the soft glass. Attempts to remove these materials from the thin walled soft glass surface by means of acid leaching produced significant brittleness. This deleterious result was further increased by attempts at high temperature silylation or polysiloxane deactivation. In sharp contrast, the fused silica surface was essentially free of metal oxides and the surface silanol groups are easily neutralized by silylation or polysiloxane deactivation techniques. No brittleness was observed following these procedures. An increasing series of high molecular weight, viscous, polymeric vinyl containing non-polar and highly polar stationary phases have been produced which readily wet the surface of the fused silica and are easily crosslinked in the presence of free radical generators. These columns are essentially free of all the problems noted with flexible thin walled soft glass. When all of the parameters involved in the fabrication of a glass capillary column are assessed, it appears at this time, that the flexible fused silica glass column with cross linked phases approaches the “ideal” capillary column.