Sonochemical conversion of CO2 into hydrocarbons: The Sabatier reaction at ambient conditions

In this study, we investigated an alternative method for the chemical CO₂ reduction reaction in which power ultrasound (488 kHz ultrasonic plate transducer) was applied to CO₂-saturated (up to 3%) pure water, NaCl and synthetic seawater solutions. Under ultrasonic conditions, the converted CO₂ products were found to be mainly CH₄, C₂H₄ and C₂H₆ including large amount of CO which was subsequently converted into CH₄. We have found that introducing molecular H₂ plays a crucial role in the CO₂ conversion process and that increasing hydrogen concentration increased the yields of hydrocarbons. However, it was observed that at higher hydrogen concentrations, the overall conversion decreased since hydrogen, a diatomic gas, is known to decrease cavitational activity in liquids. It was also found that 1.0 M NaCl solutions saturated with 2% CO₂ + 98% H₂ led to maximum hydrocarbon yields (close to 5%) and increasing the salt concentrations further decreased the yield of hydrocarbons due to the combined physical and chemical effects of ultrasound. It was shown that CO₂ present in a synthetic industrial flue gas (86.74% N₂, 13% CO₂, 0.2% O₂ and 600 ppm of CO) could be converted into hydrocarbons through this method by diluting the flue gas with hydrogen. Moreover, it was observed that in addition to pure water, synthetic seawater can also be used as an ultrasonicating media for the sonochemical process where the presence of NaCl improves the yields of hydrocarbons by ca. 40%. We have also shown that by using low frequency high-power ultrasound in the absence of catalysts, it is possible to carry out the conversion process at ambient conditions i.e., at room temperature and pressure. We are postulating that each cavitation bubble formed during ultrasonication act as a “micro-reactor” where the so-called Sabatier reaction -$C{O}_2+4H_2\stackrel{\mathit{Ultrasonication}}{\to }C{H}_4+2H_{2}O$ - takes place upon collapse of the bubble. We are naming this novel approach as the “Islam-Pollet-Hihn process”.     

First principles investigations of Fe,Co, Ni in model honeycomb carbon networks

The behaviors of ferromagnetic transition metals of the first period: Fe, Co and Ni are examined within density functional theory calculations in two dimensional carbon extended networks using model structure LiC₆. Around geometry optimized structures, the energy-volume equations of states considering non magnetic and spin polarized configurations established ferromagnetic ground states with magnetizations –reduced with respect to the metals’– of 2 μ_B for FeC₆ and 1 μ_B for CoC₆ while no magnetic solution could be identified for NiC₆. In the D_6h point group of the P6/mmm space group l_m decomposition of the d states results with increasing energy into doublet state E_1g with d(x²-y²) and d(xy); singlet state A_1g d(z²) and doublet state E_2g d(xz) and d(yz) lying on E_F and responsible of the onset of magnetic moments. This was mirrored via molecular orbital approach with a construct of Fe embedded between two extended carbon networks thus validating the model structure proposed for TC₆ compounds. The 100% polarization in one spin channel allows proposing potential uses in spintronics applications.     

Towards molecular-scale electronics and biomolecular self-assembly

This paper provides an overview of recent research developments in the field of nanoelectronics with organic materials such as carbon nanotubes and DNA-templated nanowires. Carbon nanotubes and gold electrodes are chemically functionalized in order to contact carbon nanotubes by self-assembly. The transport properties of these nanotubes are dominated by charging effects and display clear Coulomb blockade behaviour. A different approach towards nanoscale electronics is based on the molecular recognition properties of biomolecules such as DNA. As an example, DNA is stretched between electrodes using a molecular combing technique. A two-step metallization procedure leads to the formation of highly conductive gold nanowires.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶 凝胶法以磷钼酸 (MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2 催化剂 .使用ICP、XRD、TG DTA、IR、TPD MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能 .杂多钼酸盐与TiO2 通过O2 -在TiO2 表面发生了键合 .在 6 2 3K下 ,杂多阴离子仍保持原有的Keggin结构 .CO2 在Lewis酸位Ni(Ⅱ )和Lewis碱位Ni-O -Mo的桥氧协同作用下生成CO2 卧式吸附态Ni(Ⅱ )←O - (CO)← (O--Ni) .丙烯有多种吸附态在催化剂上吸附 .在 5 6 3K、1MPa和空速 15 0 0h-1的反应条件下 ,丙烯的摩尔转化率为 3.2 % ,产物MAA选择性为 95 % .     

Magnetic properties of multiwalled carbon nanotubes as a function of acid treatment

We investigate the electronic properties of multiwalled carbon nanotubes both before and after acid treatment with concentrated sulphuric and nitric acids. Magnetic susceptibility measurements were performed using a SQUID magnetometer and show that there is a considerable enhancement in the density of states at the Fermi level. The data shows that the diamagnetic influence from the graphitic nanotubes dominates. We experimentally observe, after acid treatment, that the diamagnetic susceptibility remains unchanged at 5 K but notably decreases at 77 K. We propose the acid treatment has increased the Van Vleck paramagnetic contribution lowering the diamagnetic response from the π-electron orbital magnetisation. The Van Vleck paramagnetic contribution is finite-temperature dependent with a diminishing contribution at higher fields.     

掺杂对碳纳米管拉曼光谱及场发射性能的影响

采用高温热解法在860℃分别制备出了镓、氮以及硼和氮掺杂的碳纳米管,提纯后利用丝网印刷工艺分别将它们制备成薄膜,并测试了它们的拉曼光谱与场发射性能。测试结果表明,掺杂纳米管的缺陷密集度比纯碳纳米管明显增大,而它们的场致电子发射性能则与掺杂元素的性质密切相关。镓和氮掺杂的纳米管均具有非常优异的场发射性能,而硼和氮共掺杂的纳米管的场发射性能很差。掺杂引起碳纳米管费米能级附近能态密度的变化及功函数的降低是其具有优异场致电子发射性能的主要原因。     

Nanoscale surface of carbon nanotube fibers for medical applications: Structure and chemistry revealed by TOF-SIMS analysis

Surface structure and related chemistry understanding is a vital element in the design of high biocompatible materials since adsorption and adhesion of biological components are involved. These features are even more important in the case of nanostructured materials such as carbon nanotubes (CNTs) fibers. In our preliminary work we synthesised CNTs based fibers for medical applications. This new hybrid system combines polyvinyl alcohol (PVA) with CNTs and polylactic-co-glycolic acid (PLGA), a biodegradable copolymer. The surface properties of this material are investigated in order to guarantee a biocompatible response. Time-of-flight secondary ion mass spectrometry (TOF-SIMS) was found to be an ideal tool for fiber characterisation owing to its capacity to provide chemical specificity combined with detection limits beyond the reach of techniques previously used. Complementary morphological information is provided by atomic force microscopy (AFM). The corroboration of both data enables us to define the chemistry and structure of this new formulation.     

Au deposits on graphite: On the nature of high temperature desorption peaks in CO thermal desorption spectra

Due to the discovery of Au as a catalyst for low temperature CO oxidation, the adsorption of CO on Au surfaces has attracted a lot of attention recently. On stepped and rough single crystal surfaces as well as on deposited particles two characteristic desorption states above 100 K have been observed via TPD. We have studied Au deposits on graphite in order to elucidate the nature of these desorption peaks in more detail. For this purpose, Au was deposited at 100 K and 300 K on HOPG as a weakly interacting support. In analogy to other supports, we obtain two desorption states (∼140 K and ∼170 K) whose relative intensities depend strongly on the deposition temperature with the high temperature peak being much more pronounced for the 100 K deposits. After annealing to 600 K, both states drastically lose intensity. XP spectra, on the other hand, show virtually no decrease of the Au 4f intensity as would be expected for desorption or significant changes of the particle morphologies. We conclude that both desorption peaks are defect-related and connected with under-coordinated Au atoms that are lost for the most part upon annealing. These sites could be located at the perimeter of dendritic islands or on small, defect-rich particles in addition to larger particles not adsorbing CO at 100 K. Preliminary STM results are in favour of the second interpretation.     

Study of the spontaneous formation of organic layers on carbon and metal surfaces from diazonium salts

This study investigates the spontaneous grafting of different para-substituted phenyl groups on carbon and metallic surfaces from diazonium salts solutions. Glassy carbon, nickel, zinc and iron plates were allowed to react with an acetonitrile solution of aryldiazonium tetrafluoroborate salt by simple dipping. The surfaces were characterized before and after their immersion by XPS and AFM to evidence the formation of a coating on the different materials. The results are indicative of the presence of substituted phenyl groups on all the investigated surfaces. This study also aims at correlating grafting efficiency with metal reactivities and diazonium salt electronic properties by means of AFM and FT-IRRAS. For this purpose, zinc and nickel were chosen due to their opposite reducing properties and two diazonium salts were selected with electron-donor or -withdrawing para-substituents. The results tend to indicate that redox properties of both partners (diazonium + metal) are of prime importance for grafting to occur.     

含氰基的酚醛树脂及其碳纤维复合材料

含氰基的酚醛树脂，具有优异的耐高温性能和高温下的机械强度，在３１５℃下性能变化甚小；不着火，发烟量低，有良好的加工成型性能。热固化过程中氰基成三嗪环而交联，没有小分子脱出，是一类具有广泛发展前景的新型热固性树脂。